Jump to content
Sign in to follow this  
mpownby

BD-R burn hangs on "Reserving Track..."

Recommended Posts

I seem to be having the exact problem as this guy :  http://forum.imgburn.com/index.php?/topic/23959-hang-reserving-track-for-bd-r-complilation/?hl=%2Breserving+%2Btrack&do=findComment&comment=157103

 

ImgBurn used to work fine, at some point I upgraded or installed something and now it doesn't. *sigh*

 

But it wouldn't let me reply to that thread so I reluctantly am starting a new one.  I found another thread suggesting that I look at my "family tree".  Below is my log.

 

Is it possible to pay for support?  I successfully found another blu-ray burning program that seems to work fine but I like ImgBurn would would prefer to keep using it.

 

I 14:36:47 ImgBurn Version 2.5.8.0 started!
I 14:36:47 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 14:36:47 Total Physical Memory: 8,371,312 KiB  -  Available: 5,395,120 KiB
I 14:36:47 Initialising SPTI...
I 14:36:47 Searching for SCSI / ATAPI devices...
I 14:36:47 -> Drive 1 - Info: ATAPI iHBS312   2 PL16 (E:) (SATA)
I 14:36:47 Found 1 BD-RE!
I 14:37:13 Device: [1:0:0] ATAPI iHBS312   2 PL16 (E:) (SATA)
I 14:37:13 Family Tree:
I 14:37:13 -> ACPI x64-based PC
I 14:37:13 -> Microsoft ACPI-Compliant System
I 14:37:13 -> PCI bus
I 14:37:13 -> Intel® 6 Series/C200 Series Chipset Family PCI Express Root Port 8 - 1C1E (VEN_8086&DEV_1C1E - Intel - pci)
I 14:37:13 -> Standard AHCI 1.0 Serial ATA Controller (VEN_1B4B&DEV_9172 - Marvell - msahci - v6.1.7601.18231)
I 14:37:13 -> IDE Channel (ATA Channel 1)
I 14:37:13 -> CD-ROM Drive (ATAPI iHBS312   2 ATA Device) (Channel 1, Target 0, Lun 0)
I 14:43:20 Operation Started!
I 14:43:20 Source File: F:\capture\badlands.iso
I 14:43:20 Source File Sectors: 6,407,936 (MODE1/2048)
I 14:43:20 Source File Size: 13,123,452,928 bytes
I 14:43:20 Source File Volume Identifier: badlands_raw
I 14:43:20 Source File Volume Set Identifier: 478B51B80061C6FA
I 14:43:20 Source File Application Identifier: ImgBurn v2.5.8.0
I 14:43:20 Source File Implementation Identifier: ImgBurn
I 14:43:20 Source File File System(s): UDF (1.02)
I 14:43:20 Destination Device: [1:0:0] ATAPI iHBS312   2 PL16 (E:) (SATA)
I 14:43:20 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000)
I 14:43:20 Destination Media Supported Write Speeds: 4x, 6x
I 14:43:20 Destination Media Sectors: 12,219,392
I 14:43:20 Write Mode: BD
I 14:43:20 Write Type: DAO
I 14:43:20 Write Speed: 4x
I 14:43:20 Hardware Defect Management Active: No
I 14:43:20 BD-R Verify Not Required: Yes
I 14:43:20 Link Size: Auto
I 14:43:20 Lock Volume: Yes
I 14:43:20 Test Mode: No
I 14:43:20 OPC: No
I 14:43:20 BURN-Proof: Enabled
I 14:43:22 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x)
I 14:43:22 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 14:43:22 CD/DVD Life Record Count: 54 - CD/DVD Record Count: 14
I 14:43:22 BD Life Record Count: 23 - BD Record Count: 10
 

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.