cwrb Posted January 31, 2016 Share Posted January 31, 2016 I am trying to burn data to a bluray burner with RiDATA BD-R 4x 25gb disc on my Win7 64-bit system via a .Matshita BD-MLT UJ240as USB drive (firmware is up to date) and power calibration area error occurs. The drive burns DVDs. Any ideas? I 14:02:23 ImgBurn Version 2.5.8.0 started! I 14:02:23 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 14:02:23 Total Physical Memory: 8,319,004 KiB - Available: 4,728,468 KiB W 14:02:23 Drive D:\ (FAT32) does not support single files > 4 GiB in size. I 14:02:23 Initialising SPTI... I 14:02:23 Searching for SCSI / ATAPI devices... I 14:02:23 -> Drive 1 - Info: hp BD CMB UJ162 1.00 (E:) (SATA) I 14:02:23 -> Drive 2 - Info: MATSHITA BD-MLT UJ240AS 1.20 (J:) (USB 2.0) I 14:02:23 Found 1 BD-ROM XL/DVD±RW and 1 BD-RE! I 14:07:08 Operation Started! I 14:07:08 Building Image Tree... I 14:07:25 Corrected file system selection for MP3 Audio disc. I 14:07:37 Checking Directory Depth... I 14:07:37 Calculating Totals... I 14:07:37 Preparing Image... I 14:07:37 Checking Path Length... I 14:07:37 Contents: 50 Files, 0 Folders I 14:07:37 Content Type: Data I 14:07:37 Data Type: MODE1/2048 I 14:07:37 File System(s): ISO9660, Joliet I 14:07:37 Volume Label: songs I 14:07:37 Size: 423,227,249 bytes I 14:07:37 Sectors: 206,679 I 14:07:37 Image Size: 423,362,560 bytes I 14:07:37 Image Sectors: 206,720 I 14:07:46 Operation Successfully Completed! - Duration: 00:00:38 W 14:07:55 User accepted disc space warning and is attempting to underburn! I 14:07:55 Operation Started! I 14:07:55 Source File: -==/\/[bUILD IMAGE]\/\==- I 14:07:55 Source File Sectors: 206,720 (MODE1/2048) I 14:07:55 Source File Size: 423,362,560 bytes I 14:07:55 Source File Volume Identifier: songs I 14:07:55 Source File Volume Set Identifier: UNDEFINED I 14:07:55 Source File Application Identifier: ImgBurn v2.5.8.0 - The Ultimate Image Burner! I 14:07:55 Source File Implementation Identifier: ImgBurn v2.5.8.0 I 14:07:55 Source File File System(s): ISO9660, Joliet I 14:07:55 Destination Device: [0:0:0] MATSHITA BD-MLT UJ240AS 1.20 (J:) (USB) I 14:07:55 Destination Media Type: BD-R (Disc ID: RITEK-BO1-000) I 14:07:55 Destination Media Supported Write Speeds: 1x, 2x I 14:07:55 Destination Media Sectors: 12,219,392 I 14:07:55 Write Mode: BD I 14:07:55 Write Type: DAO I 14:07:55 Write Speed: 1x I 14:07:55 Hardware Defect Management Active: No I 14:07:55 BD-R Verify Not Required: Yes I 14:07:55 Link Size: Auto I 14:07:55 Lock Volume: Yes I 14:07:55 Test Mode: No I 14:07:55 OPC: No I 14:07:55 BURN-Proof: Enabled I 14:07:55 Write Speed Successfully Set! - Effective: 4,496 KB/s (1x) I 14:07:58 Filling Buffer... (80 MiB) I 14:08:02 Writing LeadIn... W 14:08:38 Failed to Write Sectors 512 - 543 - Reason: Power Calibration Area Error W 14:08:38 Retrying (1 of 20)... W 14:08:38 Retry Failed - Reason: Power Calibration Area Error W 14:08:38 Retrying (2 of 20)... W 14:08:38 Retry Failed - Reason: Power Calibration Area Error W 14:08:38 Retrying (3 of 20)... W 14:08:38 Retry Failed - Reason: Power Calibration Area Error W 14:08:38 Retrying (4 of 20)... W 14:08:38 Retry Failed - Reason: Power Calibration Area Error W 14:08:38 Retrying (5 of 20)... W 14:08:38 Retry Failed - Reason: Power Calibration Area Error W 14:08:38 Retrying (6 of 20)... W 14:08:38 Retry Failed - Reason: Power Calibration Area Error W 14:08:38 Retrying (7 of 20)... W 14:08:38 Retry Failed - Reason: Power Calibration Area Error W 14:08:38 Retrying (8 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (9 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (10 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (11 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (12 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (13 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (14 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (15 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (16 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (17 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (18 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (19 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:08:39 Retrying (20 of 20)... W 14:08:39 Retry Failed - Reason: Power Calibration Area Error W 14:09:50 Retrying (21)... W 14:09:50 Retry Failed - Reason: Power Calibration Area Error W 14:09:51 Retrying (22)... W 14:09:51 Retry Failed - Reason: Power Calibration Area Error E 14:09:52 Failed to Write Sectors 512 - 543 - Reason: Power Calibration Area Error I 14:09:52 Synchronising Cache... W 14:10:02 User opted to skip the 'Close Track/Session/Disc' functions. E 14:10:02 Failed to Write Image! E 14:10:02 Operation Failed! - Duration: 00:02:07 I 14:10:02 Average Write Rate: 0 KiB/s (0.0x) - Maximum Write Rate: 0 KiB/s (0.0x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 31, 2016 Share Posted January 31, 2016 If your drive can't burn those discs at either of the speeds it claims to support them at, you'll have to buy some different discs. Link to comment Share on other sites More sharing options...
cwrb Posted February 2, 2016 Author Share Posted February 2, 2016 As this is first time burning blu-ray with this burner, I will have store test it and the medium and then respond to the forum. Link to comment Share on other sites More sharing options...
Recommended Posts