Jump to content

cant use a 1GB buffer


duggy

Recommended Posts

Hi,

 

I've been unable to use a 1GB buffer when writing bluray discs. My PC currently has 32GB ram so I'm pretty sure I'm not out of RAM :)

 

If i lower the buffer to around 800GB it works but I'd like to use 1GB if possible please.

 

The logs dont say anymore than the following, the out of memory info is never added, but i see it via pop-ups (see attachments). 

 
I 20:44:02 ImgBurn Version 2.5.8.0 started!
I 20:44:02 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 20:44:02 Total Physical Memory: 33,466,220 KiB  -  Available: 28,099,972 KiB
I 20:44:02 Initialising SPTI...
I 20:44:02 Searching for SCSI / ATAPI devices...
I 20:44:02 -> Drive 1 - Info: ATAPI iHAS124   F CL02 (F:) (SATA)
I 20:44:03 -> Drive 2 - Info: ATAPI iHBS112   2 PL06 (E:) (SATA)
I 20:44:03 Found 1 DVD±RW/RAM and 1 BD-RE!
 
I'm on windows 10 64-bit if it helps, all patched up.

post-12916-0-33828700-1484772854_thumb.png

post-12916-0-87175000-1484772877_thumb.png

Link to comment
Share on other sites

Just tried with 900Mib buffer and that worked, just cant use the full 1GB.

 

I 20:44:02 ImgBurn Version 2.5.8.0 started!
I 20:44:02 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 20:44:02 Total Physical Memory: 33,466,220 KiB  -  Available: 28,099,972 KiB
I 20:44:02 Initialising SPTI...
I 20:44:02 Searching for SCSI / ATAPI devices...
I 20:44:02 -> Drive 1 - Info: ATAPI iHAS124   F CL02 (F:) (SATA)
I 20:44:03 -> Drive 2 - Info: ATAPI iHBS112   2 PL06 (E:) (SATA)
I 20:44:03 Found 1 DVD±RW/RAM and 1 BD-RE!
I 20:54:25 Operation Started!
I 20:54:25 Source File: D:\GA 6.ISO
I 20:54:25 Source File Sectors: 12,004,352 (MODE1/2048)
I 20:54:25 Source File Size: 24,584,912,896 bytes
I 20:54:25 Source File Volume Identifier: GA 6
I 20:54:25 Source File Volume Set Identifier: 4A32A4B200B72BE8
I 20:54:25 Source File Application Identifier: ImgBurn v2.5.8.0
I 20:54:25 Source File Implementation Identifier: ImgBurn
I 20:54:25 Source File File System(s): UDF (1.02)
I 20:54:25 Destination Device: [0:0:0] ATAPI iHBS112   2 PL06 (E:) (SATA)
I 20:54:25 Destination Media Type: BD-R (Disc ID: MEI-RA1-001)
I 20:54:25 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x, 12x
I 20:54:25 Destination Media Sectors: 12,219,392
I 20:54:25 Write Mode: BD
I 20:54:25 Write Type: DAO
I 20:54:25 Write Speed: 6x
I 20:54:25 Hardware Defect Management Active: No
I 20:54:25 BD-R Verify Not Required: Yes
I 20:54:25 Link Size: Auto
I 20:54:25 Lock Volume: Yes
I 20:54:25 Test Mode: No
I 20:54:25 OPC: Yes
I 20:54:25 BURN-Proof: Enabled
I 20:54:27 Write Speed Successfully Set! - Effective: 26,970 KB/s (6x)
I 20:54:27 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 20:54:27 CD/DVD Life Record Count: 10 - CD/DVD Record Count: 1
I 20:54:27 BD Life Record Count: 13 - BD Record Count: 5
I 20:54:55 Filling Buffer... (900 MiB)
I 20:54:59 Writing LeadIn...
I 20:55:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 12004351)
I 20:55:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12004351)
Edited by duggy
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.