spynexes Posted April 29, 2017 Share Posted April 29, 2017 Hi i ve been used your program for a couple of days and it worked just fine! i have a (LG BH16NS40) with an updated firmware,but now it cannot accomplish the procedure,and sohwin the following problems in the log box, I 00:02:50 ImgBurn Version 2.5.8.0 started!I 00:02:50 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)I 00:02:50 Total Physical Memory: 16.737.516 KiB - Available: 14.422.656 KiBI 00:02:50 Initialising SPTI...I 00:02:50 Searching for SCSI / ATAPI devices...I 00:02:51 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS40 NL02-01 (F:) (ATA)I 00:02:51 -> Drive 2 - Info: HL-DT-ST BD-RE BH16NS40 1.03-A0 (D:) (ATA)I 00:02:51 Found 1 DVD±RW/RAM and 1 BD-RE XL!I 00:03:29 Operation Started!I 00:03:29 Building Image Tree...I 00:03:31 Calculating Totals...I 00:03:31 Preparing Image...I 00:03:31 Contents: 71 Files, 16 FoldersI 00:03:31 Content Type: BD VideoI 00:03:31 Data Type: MODE1/2048I 00:03:31 File System(s): UDF (2.50)I 00:03:31 Volume Label: TOWER OF LONDONI 00:03:31 Size: 29.707.186.397 bytesI 00:03:31 Sectors: 14.505.504I 00:03:31 Image Size: 29.708.582.912 bytesI 00:03:31 Image Sectors: 14.506.144I 00:03:32 Operation Successfully Completed! - Duration: 00:00:03I 00:03:32 Operation Started!I 00:03:32 Source File: -==/\/[bUILD IMAGE]\/\==-I 00:03:32 Source File Sectors: 14.506.144 (MODE1/2048)I 00:03:32 Source File Size: 29.708.582.912 bytesI 00:03:32 Source File Volume Identifier: TOWER OF LONDONI 00:03:32 Source File Volume Set Identifier: 4A9D006E00DD57E0I 00:03:32 Source File Application Identifier: ImgBurn v2.5.8.0I 00:03:32 Source File Implementation Identifier: ImgBurnI 00:03:32 Source File File System(s): UDF (2.50)I 00:03:32 Destination Device: [0:1:0] HL-DT-ST BD-RE BH16NS40 1.03 (D:) (ATA)I 00:03:32 Destination Media Type: BD-R (Disc ID: VERBAT-IMf-000)I 00:03:32 Destination Media Supported Write Speeds: 4x; 6x; 8xI 00:03:32 Destination Media Sectors: 24.438.784I 00:03:32 Write Mode: BDI 00:03:32 Write Type: DAOI 00:03:32 Write Speed: MAXI 00:03:32 Hardware Defect Management Active: NoI 00:03:32 BD-R Verify Not Required: YesI 00:03:32 Link Size: AutoI 00:03:32 Lock Volume: YesI 00:03:32 Test Mode: NoI 00:03:32 OPC: NoI 00:03:32 BURN-Proof: EnabledI 00:03:32 Write Speed Successfully Set! - Effective: 35.968 KB/s (8x)I 00:04:00 Filling Buffer... (80 MiB)I 00:04:02 Writing LeadIn...I 00:04:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 14506143)I 00:04:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 14506143)I 00:04:03 Writing Layer 0... (LBA: 0 - 12219391)W 00:10:12 Waiting for buffers to recover... (LBA: 5528480)W 00:10:15 Waiting for hard disk activity to reach threshold level...I 00:10:18 Writing Sectors...W 00:12:13 Waiting for buffers to recover... (LBA: 7491200)W 00:12:15 Waiting for hard disk activity to reach threshold level...I 00:12:18 Writing Sectors...W 00:14:17 Waiting for buffers to recover... (LBA: 9525056)W 00:14:19 Waiting for hard disk activity to reach threshold level...I 00:14:23 Writing Sectors...I 00:16:58 Writing Layer 1... (LBA: 12219392 - 14506143)I 00:19:10 Synchronising Cache...I 00:19:13 Closing Track...I 00:19:14 Finalising Disc...I 00:19:37 Exporting Graph Data...I 00:19:37 Graph Data File: C:\Users\spyrt\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS40_1.03_ΣΆΒΒΑΤΟ-29-ΑΠΡΊΛΙΟς-2017_12-03_πμ_VERBAT-IMf-000_MAX.ibgI 00:19:37 Export Successfully Completed!I 00:19:37 Operation Successfully Completed! - Duration: 00:16:04I 00:19:37 Average Write Rate: 32.022 KiB/s (7.3x) - Maximum Write Rate: 35.822 KiB/s (8.2x)I 00:19:37 Cycling Tray before Verify...W 00:19:46 Waiting for device to become ready...I 00:20:08 Device Ready!I 00:20:12 Operation Started!I 00:20:12 Source Device: [0:1:0] HL-DT-ST BD-RE BH16NS40 1.03 (D:) (ATA)I 00:20:12 Source Media Type: BD-R (Disc ID: VERBAT-IMf-000)I 00:20:12 Source Media Supported Read Speeds: 2x; 4,2x; 6,2x; 8xI 00:20:12 Source Media Supported Write Speeds: 4x; 6x; 8xI 00:20:12 Source Media Sectors: 14.506.144I 00:20:12 Source Media Size: 29.708.582.912 bytesI 00:20:12 Image File: -==/\/[bUILD IMAGE]\/\==-I 00:20:12 Image File Sectors: 14.506.144 (MODE1/2048)I 00:20:12 Image File Size: 29.708.582.912 bytesI 00:20:12 Image File Volume Identifier: TOWER OF LONDONI 00:20:12 Image File Volume Set Identifier: 4A9D006E00DD57E0I 00:20:12 Image File Application Identifier: ImgBurn v2.5.8.0I 00:20:12 Image File Implementation Identifier: ImgBurnI 00:20:12 Image File File System(s): UDF (2.50)I 00:20:12 Read Speed (Data/Audio): MAX / MAXI 00:20:13 Read Speed - Effective: 3,3x - 8x; 8x - 3,3xI 00:20:13 Verifying Session 1 of 1... (1 Track, LBA: 0 - 14506143)I 00:20:13 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 14506143)I 00:20:13 Verifying Layer 0... (LBA: 0 - 12219391)I 00:36:17 Verifying Layer 1... (LBA: 12219392 - 14506143)W 00:39:02 Failed to Read Sectors 12812064 - 12812095 - Reason: L-EC Uncorrectable ErrorW 00:39:16 Failed to Read Sectors 12830400 - 12830431 - Reason: L-EC Uncorrectable ErrorW 00:39:25 Failed to Read Sector 12830400 - Reason: Timeout on Logical UnitW 00:39:25 Sector 12830400 maps to File: \BDMV\STREAM\00019.m2tsE 13:04:47 Failed to Read Sector 12830400 - Reason: Timeout on Logical UnitE 13:04:47 Sector 12830400 maps to File: \BDMV\STREAM\00019.m2tsE 13:04:47 Failed to Verify Sectors!I 13:04:51 Exporting Graph Data...I 13:04:51 Graph Data File: C:\Users\spyrt\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS40_1.03_ΣΆΒΒΑΤΟ-29-ΑΠΡΊΛΙΟς-2017_12-03_πμ_VERBAT-IMf-000_MAX.ibgI 13:04:51 Export Successfully Completed!E 13:04:51 Operation Failed! - Duration: 12:44:35I 13:04:51 Average Verify Rate: 559 KiB/s (0.1x) - Maximum Verify Rate: 35.421 KiB/s (8.1x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 29, 2017 Share Posted April 29, 2017 Try writing at 4x rather than max (8x). Link to comment Share on other sites More sharing options...
Recommended Posts