Jump to content
liloneum

Double layer with parallel track path and L1 > L0

Recommended Posts

I have a warning message while burning an ISO file mastered with sonic scenarist.

It only appears with parallel track path and layer 1 larger than layer 0.

Please see the attached message.

The DDP2 file mastered works fine at the replicator, and the burnt image is correct, but I have always this issue in this configuration.

Just to advise it seems to be a wrong warning.

And thanks for this wonderful tool!

post-56196-0-11321900-1497880777_thumb.png

post-56196-0-94413300-1497880819_thumb.png

Share this post


Link to post
Share on other sites

I'm not sure I follow you.

 

You can't burn PTP with normal drives/media and it's not possible to have more on layer 1 than layer 0 with OTP media.

 

Your image shows layer 1 is bigger than layer 0.

Share this post


Link to post
Share on other sites

So, you're trying to burn an ISO file made by Sonic's application in ImgBurn?  It seems Sonic made it incorrectly, but there's still a possibility you can fix this.  You could try mounting Sonic's ISO as a virtual drive, go into ImgBurn's Build mode, and drag and drop all files and folders from the virtual drive into a Build project.  Then, let ImgBurn build the DVD.  It will ask you if you want to change all the various settings for DVD Video when you import the VIDEO_TS folder.  If there's still some kind of problem, then Sonic did not author the VIDEO_TS folder correctly.  The problem is beyond just the settings Sonic made for the ISO.

 

 

And, are you use the ISO contents itself aren't actually larger than the size of a DVD+/-R DL?

Share this post


Link to post
Share on other sites

I'm not sure I follow you.

 

You can't burn PTP with normal drives/media and it's not possible to have more on layer 1 than layer 0 with OTP media.

 

Your image shows layer 1 is bigger than layer 0.

I can burn the image but it seems ImgBurn recognize it as OTP instead of PTP.

This does not happen if L0 > L1. PTP allows layer 1 bigger than layer 0.

The burnt DVD is correct, but I have this warning. Wondering if this is a Sonic issue or ImgBurn issue...

Share this post


Link to post
Share on other sites

So, you're trying to burn an ISO file made by Sonic's application in ImgBurn?  It seems Sonic made it incorrectly, but there's still a possibility you can fix this.  You could try mounting Sonic's ISO as a virtual drive, go into ImgBurn's Build mode, and drag and drop all files and folders from the virtual drive into a Build project.  Then, let ImgBurn build the DVD.  It will ask you if you want to change all the various settings for DVD Video when you import the VIDEO_TS folder.  If there's still some kind of problem, then Sonic did not author the VIDEO_TS folder correctly.  The problem is beyond just the settings Sonic made for the ISO.

 

 

And, are you use the ISO contents itself aren't actually larger than the size of a DVD+/-R DL?

As I said, I can burn it correctly, but I have a warning.

I don't want to modify the ISO, as I'm sending the DDP to the replicator, not the ISO.

Burning the ISO is just for testing the behaviour of my authored DVD.

Burning the VIDEO_TS directly works fine.

Share this post


Link to post
Share on other sites

Can you post the log of you burning it please?

 

As I said in my previous reply, unless you have some special hardware and media allowing you to burn an ISO created for PTP (and not compliant with OTP limitations), it's never going to burn 'properly'.

Share this post


Link to post
Share on other sites

Well, it seems to be burnt fine.

You recommend not to burn PTP with layer 1 bigger than layer 0?

ImgBurn never complained with layer 1 smaller than layer 0.

 

How can I join the log? It complains its too long...

I can not join a file any more.

Share this post


Link to post
Share on other sites

Technically, yes, the write and Verify operations might complete successfully and without error, but it certainly won't be 'fine'. At least not if you're doing it for testing before replication.

 

Layer 0 on OTP media can only ever be greater than or equal to the size of L1.

 

So the layout you're attempting to burn is incompatible with OTP discs and it's physically impossible to burn it with the layer break in the correct place.

 

That's why you're getting the warnings from ImgBurn.

 

So it's not about me recommending you don't do it, you flat out can't... it's impossible.

 

The disc you're ending up with is nothing like the one you've actually created in scenarist. The physical layer break will have been moved to a location compliant with what's actually possible on OTP media. It may or may not be able to also adjust the ifo files on the disc accordingly.

 

You can just copy and paste the correct ImgBurn session's worth of entries from the big log file - or zip the entire thing and upload that.

Share this post


Link to post
Share on other sites

; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   lundi, 19 juin 2017, 15:56:24
; \\****************************************//
;
;
I 15:02:15 ImgBurn Version 2.5.8.0 started!
I 15:02:15 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)
I 15:02:15 Total Physical Memory: 16 675 020 KiB  -  Available: 15 193 588 KiB
W 15:02:15 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 15:02:15 Initialising SPTI...
I 15:02:15 Searching for SCSI / ATAPI devices...
I 15:02:16 -> Drive 1 - Info: ASUS BC-12D2HT 1.00 (G:) (SATA)
I 15:02:16 -> Drive 2 - Info: PIONEER BD-RW   BDR-209M 1.20-ID60 (F:) (SATA)
I 15:02:16 Found 1 BD-ROM XL/DVD±RW and 1 BD-RE XL!
I 15:03:37 Operation Started!
I 15:03:37 Source File: E:\PREAU\GraineDeChampion\AUTH\SCN\DiscImage.iso
I 15:03:37 Source File Sectors: 3 973 689 (MODE1/2054)
I 15:03:37 Source File Size: 8 161 957 206 bytes
I 15:03:37 Source File Volume Identifier: GraineDeChampion
I 15:03:37 Source File Volume Set Identifier: 4ad36598
I 15:03:37 Source File Implementation Identifier: Sonic Scenarist 3.1
I 15:03:37 Source File File System(s): ISO9660; UDF (1.02)
I 15:03:37 Destination Device: [2:0:0] ASUS BC-12D2HT 1.00 (G:) (SATA)
I 15:03:37 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 15:03:37 Destination Media Supported Write Speeds: 4x; 8x
I 15:03:37 Destination Media Sectors: 4 173 824
I 15:03:37 Destination Media L0 Data Zone Capacity: 2 086 912 (Changeable: Yes)
I 15:03:37 Write Mode: DVD
I 15:03:37 Write Type: DAO
I 15:03:37 Write Speed: MAX
I 15:03:37 DVD+R DL Reserve Track: No
I 15:03:37 Link Size: Auto
I 15:03:37 Lock Volume: Yes
I 15:03:37 Test Mode: No
I 15:03:37 OPC: No
I 15:03:37 BURN-Proof: Enabled
I 15:03:37 Write Speed Successfully Set! - Effective: 11 080 KB/s (8x)
W 15:03:48 Optimal L1 Data Zone Start LBA: None Found! (VTS_01)
I 15:03:48 Optimal L0 Data Zone Capacity: 1 989 008
I 15:03:48 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary
I 15:03:48 Set L0 Data Zone Capacity Succeeded!
I 15:03:48 L0 Data Zone Capacity - Effective: 1 989 008
I 15:03:48 Filling Buffer... (80 MiB)
I 15:03:48 Writing LeadIn...
I 15:04:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 3973688)
I 15:04:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3973688)
I 15:04:25 Writing Layer 0... (LBA: 0 - 1989007)
I 15:11:42 Writing Layer 1... (LBA: 1989008 - 3973688)
I 15:18:59 Synchronising Cache...
I 15:19:00 Closing Track...
I 15:19:01 Finalising Disc...
I 15:19:28 Exporting Graph Data...
I 15:19:28 Graph Data File: C:\Users\l\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_BC-12D2HT_1.00_LUNDI-19-JUIN-2017_15-03_MKM-003-00_MAX.ibg
I 15:19:28 Export Successfully Completed!
I 15:19:28 Operation Successfully Completed! - Duration: 00:15:50
I 15:19:28 Average Write Rate: 9 130 KiB/s (6.7x) - Maximum Write Rate: 10 993 KiB/s (8.1x)
I 15:36:36 Operation Started!
I 15:36:36 Source File: E:\PREAU\GraineDeChampion\AUTH\SCN\DiscImage.iso
I 15:36:36 Source File Sectors: 3 973 689 (MODE1/2054)
I 15:36:36 Source File Size: 8 161 957 206 bytes
I 15:36:36 Source File Volume Identifier: GraineDeChampion
I 15:36:36 Source File Volume Set Identifier: 4ad36598
I 15:36:36 Source File Implementation Identifier: Sonic Scenarist 3.1
I 15:36:36 Source File File System(s): ISO9660; UDF (1.02)
I 15:36:36 Destination Device: [2:0:0] ASUS BC-12D2HT 1.00 (G:) (SATA)
I 15:36:36 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 15:36:36 Destination Media Supported Write Speeds: 4x; 8x
I 15:36:36 Destination Media Sectors: 4 173 824
I 15:36:36 Destination Media L0 Data Zone Capacity: 2 086 912 (Changeable: Yes)
I 15:36:36 Write Mode: DVD
I 15:36:36 Write Type: DAO
I 15:36:36 Write Speed: MAX
I 15:36:36 DVD+R DL Reserve Track: No
I 15:36:36 Link Size: Auto
I 15:36:36 Lock Volume: Yes
I 15:36:36 Test Mode: No
I 15:36:36 OPC: No
I 15:36:36 BURN-Proof: Enabled
I 15:36:36 Write Speed Successfully Set! - Effective: 11 080 KB/s (8x)
W 15:40:05 Optimal L1 Data Zone Start LBA: None Found! (VTS_01)
I 15:40:05 Optimal L0 Data Zone Capacity: 1 989 008
I 15:40:05 Optimal L0 Data Zone Method: ECC Block Boundary, VOBU Boundary
I 15:40:05 Set L0 Data Zone Capacity Succeeded!
I 15:40:05 L0 Data Zone Capacity - Effective: 1 989 008
I 15:40:05 Filling Buffer... (80 MiB)
I 15:40:05 Writing LeadIn...
I 15:40:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 3973688)
I 15:40:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3973688)
I 15:40:45 Writing Layer 0... (LBA: 0 - 1989007)
I 15:48:02 Writing Layer 1... (LBA: 1989008 - 3973688)
I 15:55:17 Synchronising Cache...
I 15:55:18 Closing Track...
I 15:55:19 Finalising Disc...
I 15:55:46 Exporting Graph Data...
I 15:55:46 Graph Data File: C:\Users\l\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_BC-12D2HT_1.00_LUNDI-19-JUIN-2017_15-36_MKM-003-00_MAX.ibg
I 15:55:46 Export Successfully Completed!
I 15:55:46 Operation Successfully Completed! - Duration: 00:19:10
I 15:55:46 Average Write Rate: 9 151 KiB/s (6.7x) - Maximum Write Rate: 10 978 KiB/s (8.1x)
I 15:56:24 Close Request Acknowledged
I 15:56:24 Closing Down...
I 15:56:24 Shutting down SPTI...
I 15:56:24 ImgBurn closed!

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use.