Jump to content

ImgBurn 1 : Power2Go 0


kmecko

Recommended Posts

I am using Power2Go to burn ISO files of Blu-Ray movies to Verbatim DVD+R DL disks and they play at Xbox One.

 

However, after successfully burning a disk, Power2Go crashes every time and messes up my PC so I have to reboot every time.  Cyberlink was not able to resolve the issue.

 

I tried ImgBurn and not a single disk was able to play on Xbox One. Movie disk plays on my PC, but not on Xbox One.

 

Can anyone help me figure it out, why ImgBurn disk would not play on Xbox One and if I use Power2Go to burn the same ISO file it plays on Xbox One?

 

Both Blu-Ray movie disks (burned by ImgBurn and Power2Go) play on PC.

Edited by kmecko
Link to comment
Share on other sites

Thank you for your help.

 

Bellow is the last log entry.

I did not do "verify".

The disk plays on PC and does not play on Xbox One.

 

 

; //****************************************\\
;   ImgBurn Version 2.5.8.0 - Log
;   Tuesday, 04 July 2017, 16:40:43
; \\****************************************//
;
;
I 15:52:32 ImgBurn Version 2.5.8.0 started!
I 15:52:32 Microsoft Windows 8 Professional x64 Edition (6.2, Build 9200)
I 15:52:32 Total Physical Memory: 12,581,356 KiB  -  Available: 8,707,188 KiB
I 15:52:32 Initialising SPTI...
I 15:52:32 Searching for SCSI / ATAPI devices...
I 15:52:32 -> Drive 1 - Info: TOSHIBA ODD-DVD SD-R5272 1030 (E:) (ATA)
I 15:52:32 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (X:) (SCSI)
I 15:52:33 -> Drive 3 - Info: HL-DT-ST BD-RE  BE08LU20 2.00-02 (F:) (ATA)
I 15:52:33 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE!
I 15:58:37 Operation Started!
I 15:58:37 Source File: M:\Alice_Through_the_Looking_Glass_BD9.iso
I 15:58:37 Source File Sectors: 3,885,696 (MODE1/2048)
I 15:58:37 Source File Size: 7,957,905,408 bytes
I 15:58:37 Source File Volume Identifier: Alice Through the Looking Glass
I 15:58:37 Source File Volume Set Identifier: 4AE16C86003B4A04
I 15:58:37 Source File Application Identifier: ImgBurn v2.5.8.0
I 15:58:37 Source File Implementation Identifier: ImgBurn
I 15:58:37 Source File File System(s): UDF (2.50)
I 15:58:37 Destination Device: [5:1:0] HL-DT-ST BD-RE  BE08LU20 2.00 (F:) (ATA)
I 15:58:37 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 15:58:37 Destination Media Supported Write Speeds: 2.4x, 4x
I 15:58:37 Destination Media Sectors: 4,173,824
I 15:58:37 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 15:58:37 Write Mode: DVD
I 15:58:37 Write Type: DAO
I 15:58:37 Write Speed: 2.4x
I 15:58:37 DVD+R DL Reserve Track: No
I 15:58:37 Link Size: Auto
I 15:58:37 Lock Volume: Yes
I 15:58:37 Test Mode: No
I 15:58:37 OPC: No
I 15:58:37 BURN-Proof: Enabled
I 15:58:37 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 15:58:37 Book Type Setting: DVD-ROM
I 15:58:37 Optimal L0 Data Zone Capacity: 1,942,848
I 15:58:37 Optimal L0 Data Zone Method: ECC Block Boundary
I 15:59:08 Set L0 Data Zone Capacity Succeeded!
I 15:59:08 L0 Data Zone Capacity - Effective: 1,942,848
I 15:59:08 Filling Buffer... (80 MiB)
I 15:59:09 Writing LeadIn...
I 15:59:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 3885695)
I 15:59:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3885695)
I 15:59:10 Writing Layer 0... (LBA: 0 - 1942847)
I 16:19:19 Writing Layer 1... (LBA: 1942848 - 3885695)
I 16:39:32 Synchronising Cache...
I 16:39:33 Closing Track...
I 16:39:40 Finalising Disc...
I 16:40:35 Exporting Graph Data...
I 16:40:35 Graph Data File: C:\Users\Ivan\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BE08LU20_2.00_TUESDAY-JULY-4-2017_3-58_PM_MKM-003-00_2.4x.ibg
I 16:40:35 Export Successfully Completed!
I 16:40:35 Operation Successfully Completed! - Duration: 00:41:57
I 16:40:35 Average Write Rate: 3,209 KiB/s (2.4x) - Maximum Write Rate: 3,286 KiB/s (2.4x)
I 16:40:43 Close Request Acknowledged
I 16:40:43 Closing Down...
I 16:40:43 Shutting down SPTI...
I 16:40:43 ImgBurn closed!
;

Link to comment
Share on other sites

I've seen it where some players won't play BD Video from discs where the booktype has been changed to DVD-ROM... because they simply don't expect to ever see BD Video content on such discs.

 

So what I'd suggest is going into the Settings -> Write tab -> Page 1 and enable the 'Use Normal for BD Video Discs' option.

 

Then try again after you've burnt another one.

Link to comment
Share on other sites

Lightning UK!

 

Thank you very much for your help.  It worked like a charm!

 

The score is now officially:

ImgBurn 1 : Power2Go 0

 

Yes, Power2Go crashes every single time after it burns a disk, that's why it is loosing!

I think I will stick with ImgBurn for as long as disks are playing in Xbox One.

 

Once again, thank you for your prompt reply and for your spot on answer.

 

Regards,

Ivan Kmecko

Edited by kmecko
Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.