Jump to content

I/O Errror - Verbatim DVD+R Dual Layer, 8 discs ruined :(


burrnbabyburn

Recommended Posts

Hey guys my cd-writter is fine with buring normal cd's but i keep get this error when its gets to 58% of burning on a dual layer, Its driving me crazy. Here is the error and log file info - 

 

Capture.jpg

I 00:59:23 ImgBurn Version 2.5.8.0 started!
I 00:59:23 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 00:59:23 Total Physical Memory: 3,141,788 KiB  -  Available: 1,729,840 KiB
W 00:59:23 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 00:59:23 Initialising SPTI...
I 00:59:23 Searching for SCSI / ATAPI devices...
I 00:59:24 -> Drive 1 - Info: PIONEER DVD-RW  DVR-215D 1.13-GENERAL (G:) (SATA)
I 00:59:24 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223C SB07 (F:) (SATA)
I 00:59:24 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 01:07:07 Operation Started!
I 01:07:07 Source File: E:\Users\Ross\Desktop\MFD2 2017\dvd2-EUR_2017_VX v1 BURN WITH SAMSUNG.mds
I 01:07:07 Source File Sectors: 3,389,712 (MODE1/2048)
I 01:07:07 Source File Size: 6,942,130,176 bytes
I 01:07:07 Source File Volume Identifier: dvd2-EUR_2017_VX v1
I 01:07:07 Source File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM
I 01:07:07 Source File File System(s): ISO9660
I 01:07:07 Destination Device: [4:0:0] TSSTcorp CDDVDW SH-S223C SB07 (F:) (SATA)
I 01:07:07 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 01:07:07 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 01:07:07 Destination Media Sectors: 4,173,824
I 01:07:07 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 01:07:07 Write Mode: DVD
I 01:07:07 Write Type: DAO
I 01:07:07 Write Speed: 4x
I 01:07:07 DVD+R DL Reserve Track: No
I 01:07:07 Link Size: Auto
I 01:07:07 Lock Volume: Yes
I 01:07:07 Test Mode: No
I 01:07:07 OPC: No
I 01:07:07 BURN-Proof: Enabled
I 01:07:07 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 01:07:07 Book Type Setting: N/A (Reason: Incorrect function.)
E 01:07:39 User specified layer break position conflicts with image specified layer break position.
E 01:07:39 Operation Failed! - Duration: 00:00:31
I 01:07:39 Average Write Rate: N/A - Maximum Write Rate: N/A
I 01:08:13 Operation Started!
I 01:08:13 Source File: E:\Users\Ross\Desktop\MFD2 2017\dvd2-EUR_2017_VX v1 BURN WITH SAMSUNG.mds
I 01:08:13 Source File Sectors: 3,389,712 (MODE1/2048)
I 01:08:13 Source File Size: 6,942,130,176 bytes
I 01:08:13 Source File Volume Identifier: dvd2-EUR_2017_VX v1
I 01:08:13 Source File Application Identifier: GENISOIMAGE ISO 9660/HFS FILESYSTEM CREATOR © 1993 E.YOUNGDALE © 1997-2006 J.PEARSON/J.SCHILLING © 2006-2007 CDRKIT TEAM
I 01:08:13 Source File File System(s): ISO9660
I 01:08:13 Destination Device: [4:0:0] TSSTcorp CDDVDW SH-S223C SB07 (F:) (SATA)
I 01:08:13 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 01:08:13 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 01:08:13 Destination Media Sectors: 4,173,824
I 01:08:13 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 01:08:13 Write Mode: DVD
I 01:08:13 Write Type: DAO
I 01:08:13 Write Speed: 4x
I 01:08:13 DVD+R DL Reserve Track: No
I 01:08:13 Link Size: Auto
I 01:08:13 Lock Volume: Yes
I 01:08:13 Test Mode: No
I 01:08:13 OPC: No
I 01:08:13 BURN-Proof: Enabled
I 01:08:13 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 01:08:13 Book Type Setting: N/A (Reason: Incorrect function.)
I 01:08:13 Optimal L0 Data Zone Capacity: 1,694,864
I 01:08:13 Optimal L0 Data Zone Method: Copied From Original Disc
I 01:09:11 Set L0 Data Zone Capacity Succeeded!
I 01:09:11 L0 Data Zone Capacity - Effective: 1,694,864
I 01:09:11 Filling Buffer... (73 MiB)
I 01:09:12 Writing LeadIn...
I 01:09:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3389711)
I 01:09:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3389711)
I 01:09:12 Writing Layer 0... (LBA: 0 - 1694863)
I 01:19:47 Writing Layer 1... (LBA: 1694864 - 3389711)
W 01:22:12 Failed to Write Sectors 1982384 - 1982415 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x82)
W 01:22:12 Retrying (1 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (2 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (3 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (4 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (5 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (6 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (7 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (8 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (9 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (10 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (11 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (12 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (13 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (14 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (15 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (16 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (17 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (18 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (19 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
W 01:22:12 Retrying (20 of 20)...
W 01:22:12 Retry Failed - Reason: Invalid Address For Write
E 01:26:35 Failed to Write Sectors 1982384 - 1982415 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x82)
E 01:26:35 Next Writable Address: 1981856
I 01:26:35 Synchronising Cache...
W 01:26:38 User opted to skip the 'Close Track/Session/Disc' functions.
E 01:26:38 Failed to Write Image!
I 01:26:41 Exporting Graph Data...
I 01:26:41 Graph Data File: C:\Users\Milky-Win7\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223C_SB07_06-JULY-2017_01-08_MKM-003-00_4x.ibg
I 01:26:41 Export Successfully Completed!
E 01:26:41 Operation Failed! - Duration: 00:18:25
I 01:26:41 Average Write Rate: 3,801 KiB/s (2.8x) - Maximum Write Rate: 5,493 KiB/s (4.1x)
 
Link to comment
Share on other sites

Thankyou. I found a youtube video on how to remove and clean the laser, I done that and it sucessfully burned a disc, I then tried it again and got the same error? Do you think its a fault drive /firmware or overheating as i tried another dual layer straight after?

 

Thanks

Edited by burrnbabyburn
Link to comment
Share on other sites

Every drive should be able to burn MKM-003-00 at 4x without an issue really. I'd therefore say it's a drive problem.

 

You could try enabling the 'Perform OPC Before Write' option in the settings, but it might not make a difference. (sometimes it helps, sometimes it makes things worse)

Link to comment
Share on other sites

Every drive should be able to burn MKM-003-00 at 4x without an issue really. I'd therefore say it's a drive problem.

 

You could try enabling the 'Perform OPC Before Write' option in the settings, but it might not make a difference. (sometimes it helps, sometimes it makes things worse)

The 'Perform OPC Before Write' has worked! 5 Successful copies. Thank you so much! :)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.