Jump to content

stuck on 'Searching for SCSI/ATAPI Devices'


andsaintz

Recommended Posts

I 04:27:55 ImgBurn Version 2.5.8.0 started!

I 04:27:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 04:27:55 Total Physical Memory: 8.370.296 KiB  -  Available: 4.273.084 KiB

W 04:27:55 I/O Interface 'Debug Mode' Enabled!

I 04:27:55 Initialising SPTI...

I 04:27:55 Searching for SCSI / ATAPI devices...

I 04:27:55 Initialising Device (\\?\ide#cdromhl-dt-st_dvdram_gh24nsc0________________lk00____#5&21fd2b5a&0&1.1.0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b})...

 

Link to comment
Share on other sites

If your drive is having trouble returning it or it's having to spin up and read the disc, yes.

 

Of course it also depends on what you mean by 'a while'. Normally it would only take a couple of seconds for ImgBurn to ask the drive lots of questions about the media and display it in the disc info panel on the right.

Link to comment
Share on other sites

Im having this error when trying to burn the disc

 

W 10:43:43 Potential 'ReadBufferCapacity' Deferred Error - Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:43 Failed to Write Sectors 64 - 95 - Reason: The request could not be executed because of an I / O device error.
Edited by andsaintz
Link to comment
Share on other sites

Here is the whole log: 

 

I 10:40:32 ImgBurn Version 2.5.8.0 started!
I 10:40:32 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 10:40:32 Total Physical Memory: 8.370.296 KiB  -  Available: 5.293.192 KiB
I 10:40:32 Initialising SPTI...
I 10:40:32 Searching for SCSI / ATAPI devices...
I 10:41:02 -> Drive 1 - Info: HL-DT-ST DVDRAM GH24NSC0 LK00-65 (G:) (ATA)
I 10:41:02 Found 1 DVD±RW!
I 10:43:09 Operation Started!
I 10:43:09 Building Image Tree...
I 10:43:11 Corrected file system selection for Operating System installation disc.
I 10:43:14 Checking Directory Depth...
I 10:43:14 Calculating Totals...
I 10:43:14 Preparing Image...
I 10:43:15 Checking Path Length...
I 10:43:15 Contents: 874 Files, 199 Folders
I 10:43:15 Content Type: Operating System Installation
I 10:43:15 Data Type: MODE1/2048
I 10:43:15 File System(s): UDF (1.02) (Bootable)
I 10:43:15 Volume Label: Win7 x64
I 10:43:15 Size: 3.131.941.310 bytes
I 10:43:15 Sectors: 1.529.648
I 10:43:15 Image Size: 3.135.963.136 bytes
I 10:43:15 Image Sectors: 1.531.232
I 10:43:17 Operation Successfully Completed! - Duration: 00:00:08
I 10:43:19 Operation Started!
I 10:43:19 Source File: -==/\/[bUILD IMAGE]\/\==-
I 10:43:19 Source File Sectors: 1.531.232 (MODE1/2048)
I 10:43:19 Source File Size: 3.135.963.136 bytes
I 10:43:19 Source File Volume Identifier: Win7 x64
I 10:43:19 Source File Volume Set Identifier: 4AF2556400175D4E
I 10:43:19 Source File Application Identifier: IMGBURN V2.5.8.0 - THE ULTIMATE IMAGE BURNER!
I 10:43:19 Source File Implementation Identifier: ImgBurn
I 10:43:19 Source File File System(s): ISO9660 (Bootable); UDF (1.02)
I 10:43:19 Destination Device: [1:1:0] HL-DT-ST DVDRAM GH24NSC0 LK00 (G:) (ATA)
I 10:43:19 Destination Media Type: DVD-R (Disc ID: TYG02)
I 10:43:20 Destination Media Supported Write Speeds: 4x; 6x; 8x
I 10:43:20 Destination Media Sectors: 2.297.888
I 10:43:20 Write Mode: DVD
I 10:43:20 Write Type: DAO
I 10:43:20 Write Speed: MAX
I 10:43:20 Link Size: Auto
I 10:43:20 Lock Volume: Yes
I 10:43:20 Test Mode: No
I 10:43:20 OPC: No
I 10:43:20 BURN-Proof: Enabled
I 10:43:21 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x)
I 10:43:24 Filling Buffer... (80 MiB)
I 10:43:27 Writing LeadIn...
W 10:43:43 Potential 'ReadBufferCapacity' Deferred Error - Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:43 Failed to Write Sectors 64 - 95 - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:43 Retrying (1 of 20)...
W 10:43:43 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:43 Retrying (2 of 20)...
W 10:43:43 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:43 Retrying (3 of 20)...
W 10:43:43 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:43 Retrying (4 of 20)...
W 10:43:43 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:43 Retrying (5 of 20)...
W 10:43:43 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:43 Retrying (6 of 20)...
W 10:43:43 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:43 Retrying (7 of 20)...
W 10:43:43 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:43 Retrying (8 of 20)...
W 10:43:43 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:44 Retrying (9 of 20)...
W 10:43:44 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:44 Retrying (10 of 20)...
W 10:43:44 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:44 Retrying (11 of 20)...
W 10:43:44 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:44 Retrying (12 of 20)...
W 10:43:44 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:44 Retrying (13 of 20)...
W 10:43:44 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:44 Retrying (14 of 20)...
W 10:43:44 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:44 Retrying (15 of 20)...
W 10:43:44 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:44 Retrying (16 of 20)...
W 10:43:44 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:44 Retrying (17 of 20)...
W 10:43:44 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:44 Retrying (18 of 20)...
W 10:43:44 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:43:44 Retrying (19 of 20)...
W 10:43:44 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:43:44 Retrying (20 of 20)...
W 10:43:44 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:44:09 Retrying (21)...
W 10:44:09 Retry Failed - Reason: A solicitação não pôde ser executada devido a um erro do dispositivo de E/S.
W 10:44:10 Retrying (22)...
W 10:44:10 Retry Failed - Reason: Unknown (ASC: 0x08, ASCQ: 0x0A)
W 10:44:11 Retrying (23)...
 
 
Maybe it's a problem on the driver?
Link to comment
Share on other sites

Yeah, something isn't quite right with your machine.

 

You might want to check the cabling to the drive. Unplug it all and plug it back in again. Maybe replace the SATA cable too if it comes to that.

 

You could also try following the 'DMA' post in the FAQ and remove your IDE/SATA controllers from within Device Manager and reboot.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.