Jump to content

MDS file


geo_img

Recommended Posts

Hello to all,

 

A friend of mine, which is a photographer, gave me a Couple of BR disks, there is an event with Part 1 & Part 2.

 

I am using the procedure Convert File/Folder to ISO file.

 

When the first BR disk (first part) is being created, it creates 2 files, an .iso & a .mds

When the second BR disk (second part) is being created, it creates only an .iso file.

 

Why is the .mds file only in the first disk?

 

thanx

Link to comment
Share on other sites

The MDS is made when certain conditions are true. They must have been true for the 1st discs and not for the 2nd.

 

If you post the log, I'll be able to tell you more.

 

If all you wanted were images of the discs, why not use the 'Create Image File From Disc' (A.K.A. 'Read' mode) option? Or perhaps that is what you used as there's no 'Convert File/Folder to ISO file' option.

Link to comment
Share on other sites

The MDS is made when certain conditions are true. They must have been true for the 1st discs and not for the 2nd.

 

If you post the log, I'll be able to tell you more.

 

If all you wanted were images of the discs, why not use the 'Create Image File From Disc' (A.K.A. 'Read' mode) option? Or perhaps that is what you used as there's no 'Convert File/Folder to ISO file' option.

 

I was getting an error when trying to do so... I think that it was happening because the disk was a Blue-ray, i will try again and post the error here.

 

I use option "Create image file from files/folders"

Edited by geo_img
Link to comment
Share on other sites

Hello again, thanx for your replies, here is the message I get, so it is probably a multisession BD

 

post-56431-0-72995400-1503136995_thumb.png

 

Also, below is the log of the Disk (DISK 1) that creates a mds file.

 

I 13:10:46 ImgBurn Version 2.5.8.0 started!
I 13:10:46 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 13:10:46 Total Physical Memory: 4.077.204 KiB  -  Available: 1.997.340 KiB
I 13:10:46 Initialising SPTI...
I 13:10:46 Searching for SCSI / ATAPI devices...
I 13:10:46 -> Drive 1 - Info: HL-DT-ST BDDVDRW CH10LS20 1.00-03 (D:) (SATA)
I 13:10:46 Found 1 BD-ROM/DVD±RW!
I 13:11:13 Operation Started!
I 13:11:13 Building Image Tree...
I 13:11:16 Calculating Totals...
I 13:11:16 Preparing Image...
I 13:11:17 Contents: 24 Files, 15 Folders
I 13:11:17 Content Type: BD Video
I 13:11:17 Data Type: MODE1/2048
I 13:11:17 File System(s): UDF (2.50)
I 13:11:17 Volume Label: 1
I 13:11:17 Size: 8.452.416.020 bytes
I 13:11:17 Sectors: 4.127.172
I 13:11:17 Image Size: 8.453.488.640 bytes
I 13:11:17 Image Sectors: 4.127.680
I 13:11:19 Operation Successfully Completed! - Duration: 00:00:06
I 13:11:19 Operation Started!
I 13:11:19 Image Contents: 24 Files, 15 Folders
I 13:11:19 Image Sectors: 4.127.680 (MODE1/2048)
I 13:11:19 Image Size: 8.453.488.640 bytes
I 13:11:19 Image Volume Identifier: 1
I 13:11:19 Image Volume Set Identifier: 4B136966003EFB44
I 13:11:19 Image Application Identifier: ImgBurn v2.5.8.0
I 13:11:19 Image Implementation Identifier: ImgBurn
I 13:11:19 Image File System(s): UDF (2.50)
I 13:11:19 Destination File: G:\1.ISO
I 13:11:19 Destination Free Space: 837.400.883.200 Bytes (817.774.300,00 KiB) (798.607,71 MiB) (779,89 GiB)
I 13:11:19 Destination File System: NTFS
I 13:11:19 File Splitting: Auto
I 13:11:19 Writing Image...
I 13:22:22 Operation Successfully Completed! - Duration: 00:11:03
I 13:22:22 Average Write Rate: 12.451 KiB/s (2.8x) - Maximum Write Rate: 145.421 KiB/s (33.1x)
 
For the other DISK, that a mds is NOT created, the Log show pretty much the same....
Edited by geo_img
Link to comment
Share on other sites

Ah ok, it makes an MDS for that ISO because it's below the size where DAEMON Tools mounts as a BD, yet it contains BD Video files.

 

If you mount such an ISO in DT, it'll emulate a DVD-ROM and BD Video doesn't always play from that type of media - because players don't expect to see it on DVD-ROM discs.

 

When you mount the MDS in DT, it'll tell DT to emulate a DVD+R instead of a DVD-ROM.

 

If you have no interest in ever mounting that specific image in DT etc, just ignore the MDS or delete it.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.