Jump to content

ImgBurn Support Forum uses cookies. Read the Privacy Policy for more info. To remove this message, please click the button to the right:    I accept the use of cookies

Photo

Optiarc DVD RW AD-5290S+ imgburn settins


Forum Rules

Read the Guides forum if you don't know how to do something. :readbook:
If you have a question or a problem, check the FAQ and use the Search to see if you can find the answer for yourself. :lightbulb:
If you're having trouble burning double layer media, read Here.
Still stuck? Create a new thread and describe your issue in detail.
Make sure you include a copy of the program's log in your post. No log = :chair:


  • Please log in to reply
13 replies to this topic

#1 kalle37

kalle37

    ISF Newbie

  • Members
  • Pip
  • 6 posts

Posted 23 September 2017 - 06:17 PM

hi,

 

i need help litle broblem. I burn navi image, but navi seys disk no navi dvd. Book type is lite-on dvd-rom.

But I have to advanse settings Optiarc DVD RW AD-5290S= lite-on.  then there is no logi error

sorry my bad english.

 

I 19:37:42 ImgBurn Version 2.5.8.0 started!
I 19:37:42 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)
I 19:37:42 Total Physical Memory: 8 345 596 KiB  -  Available: 6 966 156 KiB
W 19:37:50 Drive Z:\ (FAT32) might not support single files > 4 GiB in size.
I 19:37:50 Initialising SPTI...
I 19:37:50 Searching for SCSI / ATAPI devices...
I 19:37:50 -> Drive 1 - Info: Optiarc DVD RW AD-5290S+ 1.R9 (D:) (SATA)
I 19:37:50 Found 1 DVD±RW!
I 19:42:24 Operation Started!
I 19:42:24 Source File: C:\Users\kalle\Documents\saab navi iso tiedostot\navi 2017\86271-V524N7.MDS
I 19:42:24 Source File Sectors: 4 246 160 (MODE1/2048)
I 19:42:24 Source File Size: 8 696 135 680 bytes
I 19:42:24 Source File Volume Identifier: 86271-V524N7
I 19:42:24 Source File Volume Set Identifier: 58DCEEF958DCEDA6
I 19:42:24 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER!
I 19:42:24 Source File Implementation Identifier: ImgBurn
I 19:42:24 Source File File System(s): ISO9660; Joliet; UDF (1.02)
I 19:42:24 Destination Device: [1:0:0] Optiarc DVD RW AD-5290S+ 1.R9 (D:) (SATA)
I 19:42:24 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 19:42:24 Destination Media Supported Write Speeds: 4x; 8x
I 19:42:24 Destination Media Sectors: 4 267 040
I 19:42:24 Destination Media L0 Data Zone Capacity: 2 133 520 (Changeable: Yes)
I 19:42:24 Write Mode: DVD
I 19:42:24 Write Type: DAO
I 19:42:24 Write Speed: 1x
I 19:42:24 DVD+R DL Reserve Track: No
I 19:42:24 Link Size: Auto
I 19:42:24 Lock Volume: Yes
I 19:42:24 Test Mode: No
I 19:42:24 OPC: No
I 19:42:24 BURN-Proof: Enabled
W 19:42:24 Write Speed Miscompare! - Wanted: 1 385 KB/s (1x), Got: 5 540 KB/s (4x)
W 19:42:24 The drive only supports writing these discs at 4x; 8x.
I 19:42:24 Book Type Setting: DVD-ROM
I 19:42:24 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 19:42:25 Optimal L0 Data Zone Capacity: 2 123 088
I 19:42:25 Optimal L0 Data Zone Method: Copied From Original Disc
I 19:42:25 Set L0 Data Zone Capacity Succeeded!
I 19:42:25 L0 Data Zone Capacity - Effective: 2 123 088
I 19:42:25 Filling Buffer... (80 MiB)
I 19:42:26 Writing LeadIn...
I 19:42:48 Writing Session 1 of 1... (1 Track, LBA: 0 - 4246159)
I 19:42:48 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4246159)
I 19:42:48 Writing Layer 0... (LBA: 0 - 2123087)
I 19:55:55 Writing Layer 1... (LBA: 2123088 - 4246159)
I 20:09:09 Synchronising Cache...
I 20:09:13 Closing Track...
I 20:09:14 Finalising Disc...
I 20:09:49 Exporting Graph Data...
I 20:09:49 Graph Data File: C:\Users\kalle\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5290S+_1.R9_23-SYYSKUUTA-2017_19-42_MKM-003-00_1x.ibg
I 20:09:49 Export Successfully Completed!
I 20:09:49 Operation Successfully Completed! - Duration: 00:27:25
I 20:09:49 Average Write Rate: 5 371 KiB/s (4.0x) - Maximum Write Rate: 5 499 KiB/s (4.1x)
I 20:09:49 Cycling Tray before Verify...
W 20:09:57 Waiting for device to become ready...
I 20:10:17 Device Ready!
I 20:10:18 Operation Started!
I 20:10:18 Source Device: [1:0:0] Optiarc DVD RW AD-5290S+ 1.R9 (D:) (SATA)
I 20:10:18 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 20:10:18 Source Media Supported Read Speeds: 4x; 6x; 8x; 12x
I 20:10:18 Source Media Supported Write Speeds: 4x; 8x
I 20:10:18 Source Media Sectors: 4 246 160 (Track Path: OTP - L0: 2 123 088 - L1: 2 123 072)
I 20:10:18 Source Media Size: 8 696 135 680 bytes
I 20:10:18 Image File: C:\Users\kalle\Documents\saab navi iso tiedostot\navi 2017\86271-V524N7.MDS
I 20:10:18 Image File Sectors: 4 246 160 (MODE1/2048)
I 20:10:18 Image File Size: 8 696 135 680 bytes
I 20:10:18 Image File Volume Identifier: 86271-V524N7
I 20:10:18 Image File Volume Set Identifier: 58DCEEF958DCEDA6
I 20:10:18 Image File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER!
I 20:10:18 Image File Implementation Identifier: ImgBurn
I 20:10:18 Image File File System(s): ISO9660; Joliet; UDF (1.02)
I 20:10:18 Read Speed (Data/Audio): MAX / MAX
I 20:10:19 Read Speed - Effective: 4,8x - 12x; 12x - 4,8x
I 20:10:19 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4246159)
I 20:10:19 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4246159)
I 20:10:19 Verifying Layer 0... (LBA: 0 - 2123087)
I 20:16:28 Verifying Layer 1... (LBA: 2123088 - 4246159)
I 20:22:36 Exporting Graph Data...
I 20:22:36 Graph Data File: C:\Users\kalle\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-5290S+_1.R9_23-SYYSKUUTA-2017_19-42_MKM-003-00_1x.ibg
I 20:22:36 Export Successfully Completed!
I 20:22:36 Operation Successfully Completed! - Duration: 00:12:17
I 20:22:36 Average Verify Rate: 11 554 KiB/s (8.5x) - Maximum Verify Rate: 18 138 KiB/s (13.4x)

 



#2 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,255 posts
  • Gender:Male
  • Location:United Kingdom

Posted 23 September 2017 - 11:44 PM

What are we looking at / replying to?
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#3 dbminter

dbminter

    ISF God

  • Beta Team Members
  • PipPipPipPipPip
  • 5,459 posts
  • Gender:Male

Posted 24 September 2017 - 12:35 AM

I believe he's saying he tried to burn a DVD to update/program his car's navigation system and that the navigation system does not recognize the DVD as being inserted.

 

 

Unfortunately, it's probably down to the drive not recognizing that particular manufacturer's DVD has been inserted.



#4 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,255 posts
  • Gender:Male
  • Location:United Kingdom

Posted 24 September 2017 - 06:30 AM

Maybe it's just not showing up in Tapatalk, but I still don't see it!

All I'm seeing is 4 lines of a log file.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#5 kalle37

kalle37

    ISF Newbie

  • Members
  • Pip
  • 6 posts

Posted 24 September 2017 - 07:26 AM

Burn at another station is ok. Car navi accepts it. maybe a problem with the book type? or did not the optiarc work in imgburn?

#6 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,255 posts
  • Gender:Male
  • Location:United Kingdom

Posted 24 September 2017 - 10:12 AM

Can you copy+paste the text from the disc info box on the right when you're in 'Read' mode and that disc is in the drive please.

Oh and yeah, it was a tapatalk issue. I can see the complete first post on my PC but tapatalk on my phone only shows me the last 4 lines of the log text for some reason - hence why it made no sense!
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#7 kalle37

kalle37

    ISF Newbie

  • Members
  • Pip
  • 6 posts

Posted 24 September 2017 - 12:53 PM

If it meant burned disc information. here is.

 

 

 

 

 

 

Optiarc DVD RW AD-5290S+ 1.R9 (SATA)
Current Profile: DVD+R DL

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4 246 160
Size: 8 696 135 680 bytes
Time: 943:37:35 (MM:SS:FF)
MID: MKM-003-00
Supported Read Speeds: 4x; 6x; 8x; 12x
Current Read Speed: 12x

TOC Information:
Istunto 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 4246159)
-> LeadOut  (LBA: 4246160)

Track Information:
Session 1...
-> Track 01 (LTSA: 0, LTS: 4246160, LRA: 0)

Disc Control Blocks Information:
Optiarc

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 607
Last Physical Sector in Layer 0: 2 283 519

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 607
Last Physical Sector in Layer 0: 2 283 519

Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 591
Last Physical Sector in Layer 0: 2 319 695

Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196 608
Last Physical Sector of Data Area: 16 580 591
Last Physical Sector in Layer 0: 2 319 695

Layer Information:
Layer 0 Sectors: 2 123 088 (50%)
Layer 1 Sectors: 2 123 072 (50%)



#8 kalle37

kalle37

    ISF Newbie

  • Members
  • Pip
  • 6 posts

Posted 24 September 2017 - 03:07 PM

Do I need to do the image with the same dvd driver as I have done the burning?

#9 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,255 posts
  • Gender:Male
  • Location:United Kingdom

Posted 24 September 2017 - 07:14 PM

Ah, that's annoying, the line of info I was looking for isn't actually implemented in 2.5.8.0.

As is the case with some Audi sat nav discs that I've looked at before, perhaps not only does the drive need to support changing the 'Book Type' to DVD-ROM (which yours does ok), they may also need to change the 'Layer Type' to 'Read Only'.

In order to check what your drive is doing, can you please do the following for me...

Eject the disc, load the program and go into Read mode.
Press the F8 key to enable I/O Debug mode.
Insert the disc.
Once the disc info panel has been populated with info (the stuff you posted in your previous post), press the F8 key again to disable I/O Debug mode.
Now save the contents of the log window to a file (via File -> Save As) and then upload it for me to examine.

Thanks :)
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#10 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,255 posts
  • Gender:Male
  • Location:United Kingdom

Posted 25 September 2017 - 02:48 PM

I 16:23:25 [1:0:0] Optiarc DVD RW AD-5290S+ 1.R9 (D:) (SATA)

I 16:23:25 CDB: AD 00 00 00 00 00 01 00 08 04 00 00

I 16:23:25 CDB Interpretation: Read Disc Structure - Physical Information

I 16:23:25 BUFFER: 08 02 00 00 01 0F 32 10 00 03 00 00 00 FC FF EF 00 23 65 4F 00 00 03 4D 4B 4D 00 00 00 00 00 30 30 33 00 40 25 25 37 0C 02 2D 66 02 2D 66 21 23 0D 0E 14 14 02 01 01 10 00 21 23 0D 0E 14 14 02
Based on the info you sent me (the important bit has been included above), I have to conclude your drive leaves the layer type set to 'Recordable', even though the Disc Category (book type) has been set to DVD-ROM.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#11 kalle37

kalle37

    ISF Newbie

  • Members
  • Pip
  • 6 posts

Posted 25 September 2017 - 03:12 PM

whether problem fixed.  firmware maybe ?



#12 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,255 posts
  • Gender:Male
  • Location:United Kingdom

Posted 25 September 2017 - 03:42 PM

Yes, hopefully it can be added relatively easily in firmware. If they can do bitsetting, I can't see a reason they wouldn't also be able to change the layer type - it's in the same 'physical format information - last recorded' structure (not that I know how it's actually recorded on the physical media).

I've mentioned this thread to a contact at Vinpower Digital and will see what they come back with. Keep your fingers crossed :)
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#13 kalle37

kalle37

    ISF Newbie

  • Members
  • Pip
  • 6 posts

Posted 25 September 2017 - 04:38 PM

this how i have done it sou far book-type setting:

 

tools->drive->change book type->advanncd->drive oem-> please select->lite-on->Optiarc DVD RW AD-5290S+-> ok
change book type->Lite-on-> please select->drive (for dvd+ r dl media)->please select->dvd-rom->change->succes!->ok
->ok.

 

if I have done this same otherway then error comes up to the book-type na invalid or............

 

is this corect ?



#14 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,255 posts
  • Gender:Male
  • Location:United Kingdom

Posted 25 September 2017 - 04:51 PM

Yes, that's correct.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users