zurst Posted October 9, 2017 Share Posted October 9, 2017 Hi all, a friend has told me that when he burns blu-rays, writing speed always drops to the half he set up, and the reason is due to 'somekind of verification', he barely can be more accurate, 'he read it somewhere'. So, if he is burning at 4X he only achieves 2X and so on. Is there any kind of explanation for this?. I only can imagine the reason could be the media writing speed limits, but he told me is using the same blu-rays that I'm using, and those ones have higher speed limits Btw he is using linux, I already told him to try imgburn. And their burner seems to be the same one I have, Pioneer 209-DBK. Kind regards Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 9, 2017 Share Posted October 9, 2017 If the disk has been formatted with spare areas enabled, the drive will enable its defect management feature and will automatically verify as it burns. That's what makes it burn at half the speed it's set to. Link to comment Share on other sites More sharing options...
zurst Posted October 9, 2017 Author Share Posted October 9, 2017 If the disk has been formatted with spare areas enabled, the drive will enable its defect management feature and will automatically verify as it burns. That's what makes it burn at half the speed it's set to. Thank you so much LUK, awesome info as always Kind regards Link to comment Share on other sites More sharing options...
Recommended Posts