hello, i burned 2 dvd, i always have this error
I tried with OPC on and also with OPC Off
Jump to content
Read the Guides forum if you don't know how to do something.
If you have a question or a problem, check the FAQ and use the Search to see if you can find the answer for yourself.
If you're having trouble burning double layer media, read Here.
Still stuck? Create a new thread and describe your issue in detail.
Make sure you include a copy of the program's log in your post. No log =
Posted 13 October 2017 - 02:26 PM
hello, i burned 2 dvd, i always have this error
I tried with OPC on and also with OPC Off
Posted 13 October 2017 - 03:07 PM
Please post the log.
If you need to access it, open Help and choose ImgBurn Logs. Then, you can open the .log file in any text file editor and copy and paste the part of the log that contains the failed burn.
Posted 13 October 2017 - 07:09 PM
Thank you for answer
I can not see the old log by opening the program
Posted 13 October 2017 - 07:16 PM
Edited by ninowebs, 13 October 2017 - 07:18 PM.
Posted 13 October 2017 - 07:54 PM
I take it this is your first time burning discs? Or have you successfully burned before and this just started? Since I think this is your first time, I can't really say much of anything as to what this would be. It seems to be occurring just before the layer change. The layer change is where the vast majority of failures occur when burning double layer discs. Your Disc ID shows you're probably using the good stuff from Verbatim/Mitsubishi, so that's probably not an issue.
You might want to check for a firmware update to your drive. There could be an updated write strategy for that drive and the MKM media you're using. It seems you're using the LiteOn iHAS124 F. I'm not entirely sure because there are many different drives called the iHAS124 with firmware on the web site ImgBurn uses for that drive. However, this part of the log:
Destination Device: [2:1:0] ATAPI iHAS124 F CL9M (E:) (ATA)
seems to indicate you're using the iHAS124 F, if the F before the CL9M is the revision type and CL9M is the firmware you're currently using. According to this:
there are CL09 and CL99 firmware updates. I don't know if these will update your drive or not. Try, in Write mode, right clicking on this drive drive in the Destination drop down list and choosing the last option to check for firmware updates. See if ImgBurn finds any firmware update pages I didn't.
At this point, I'd say it's a case of your drive not liking MKM media, for whatever reason. Either because of an outdated write strategy or the drive needs replacing. If it's an outdated write strategy, a firmware update may fix that. It's generally a good idea to use the latest firmware. Not always the case; looking at you, Pioneer! But, it's generally recommended.
Posted 13 October 2017 - 08:29 PM
no matched drive detected
this utility is only drive ATAPI iHAS124 F drive
2-0-1-0 E:ATAPI iHAS124 F CL9M
Posted 13 October 2017 - 08:44 PM
Did you try both the CL09 and CL99 files? One may update your drive and one may not. Depending on your revision. Since both files are dated the same day, they appear to update different kinds of the iHAS124 F. Since your firmware begins with CL9 and the F uses the CL9 naming scheme and none of the other iHAS124 firmware use that naming scheme, it seems the F is the drive you have.
Plus, if your drive is external, which it doesn't appear to be, but I don't know why it's listed as an ATA drive instead of something like SATA, unless it's a parallel ATA drive, the firmwares generally don't update external drives. Even though the internal drive in the external drive is the same, the firmwares rarely update external drives.
It's just a guess. I didn't know for sure you had the revision F drive.
Posted 13 October 2017 - 08:47 PM
my unit is internal, i've tried both of the drivers you've proposed, but i always have the same error message i do not know what to do
Posted 13 October 2017 - 09:07 PM
There's nothing you can do with those files. You may have an OEM model variant of those drives, at which point the standard firmware updates won't work.
Try the SmartPack utility to see if there are any firmware you can download and install.
Scroll down to the bottom of that page for the download link.
SmartPack works for all LiteOn drives, they say, so if your drive is being called the ihas124 internally and it actually isn't one, this utility might actually find the firmware you need.
If that doesn't work, I wouldn't bother with trying to update the firmware because no firmware update package will probably work for that drive.
What might be a problem is the age of the drive. LiteOn doesn't make optical drives anymore as far as I know. So, whatever you're going to have is probably old. Notice the SmartPack utility was last updated more than 5 years ago, in 2012. So, it's probably been 5 years since LiteOn released an optical drive. The drive may simply be too older than the modern implementation of the MKM media. As I said before, it may be a case of your LiteOn simply not liking writing to MKM media.
Posted 13 October 2017 - 09:13 PM
Posted 13 October 2017 - 09:14 PM
even if this does not get anything, i understand perfectly but then i can do nothing i do not have other settings to see if it does not burn burning, maybe with or without OPC?
Posted 13 October 2017 - 09:21 PM
Oh, he's trying to overburn? I've never gotten a single overburn to any media to ever work. So, that may be your problem right there.
Posted 13 October 2017 - 09:22 PM
Why aren't you using the drive settings that ImgBurn recommends when attempting to overburn DL media?
Also, why aren't you letting the program read the correct layer break position from the .dvd file? You shouldn't be specifying it manually, there's no need to.
ok ,ok test this
Posted 13 October 2017 - 09:26 PM
thanks for everything, another thing I use for optimum settings, OPC etc ..
Posted 13 October 2017 - 09:38 PM
Posted 13 October 2017 - 10:50 PM
ok, this is perfect
I 00:10:37 ImgBurn Version 126.96.36.199 started!I 00:10:37 Microsoft Windows 8 Enterprise Edition (6.2, Build 9200)I 00:10:37 Total Physical Memory: 2.087.092 KiB - Available: 379.856 KiBI 00:10:37 Initialising SPTI...I 00:10:37 Searching for SCSI / ATAPI devices...I 00:10:37 -> Drive 1 - Info: ATAPI iHAS124 F CL9M (E:) (ATA)I 00:10:37 Found 1 DVD±RW!I 00:13:18 Operation Started!I 00:13:18 Source File: C:\Users\Ninowebs\Desktop\Dball\complex-dragon.ball.xenoverse.pal.dvdI 00:13:18 Source File Sectors: 4.267.015 (MODE1/2048)I 00:13:18 Source File Size: 8.738.846.720 bytesI 00:13:18 Source File Volume Identifier: DVD_ROMI 00:13:18 Source File Volume Set Identifier: 89558000MS UDFBridgeI 00:13:18 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 00:13:18 Source File Implementation Identifier: Microsoft CDIMAGE UDFI 00:13:18 Source File File System(s): ISO9660; UDF (1.50)I 00:13:18 Destination Device: [2:1:0] ATAPI iHAS124 F CL9M (E:) (ATA)I 00:13:18 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)I 00:13:18 Destination Media Supported Write Speeds: 4x; 6x; 8xI 00:13:18 Destination Media Sectors: 4.267.040I 00:13:18 Destination Media L0 Data Zone Capacity: 2.133.520 (Changeable: Yes)I 00:13:18 Write Mode: DVDI 00:13:18 Write Type: DAOI 00:13:18 Write Speed: 4xI 00:13:18 DVD+R DL Reserve Track: NoI 00:13:18 Link Size: AutoI 00:13:18 Lock Volume: YesI 00:13:18 Test Mode: NoI 00:13:18 OPC: NoI 00:13:18 BURN-Proof: EnabledI 00:13:18 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)I 00:13:18 Book Type Setting: DVD-ROMI 00:13:18 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: YesI 00:13:18 Optimal L0 Data Zone Capacity: 2.133.520I 00:13:18 Optimal L0 Data Zone Method: Copied From Original DiscI 00:13:18 Set L0 Data Zone Capacity Succeeded!I 00:13:18 L0 Data Zone Capacity - Effective: 2.133.520I 00:13:21 Filling Buffer... (80 MiB)I 00:13:22 Writing LeadIn...I 00:13:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 00:13:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 00:13:41 Writing Layer 0... (LBA: 0 - 2133519)I 00:26:54 Writing Layer 1... (LBA: 2133520 - 4267014)I 00:40:12 Synchronising Cache...I 00:40:16 Closing Track...I 00:40:17 Finalising Disc...I 00:40:53 Exporting Graph Data...I 00:40:53 Graph Data File: C:\Users\Ninowebs\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_F_CL9M_SABATO-14-OTTOBRE-2017_00-13_MKM-003-00_4x.ibgI 00:40:53 Export Successfully Completed!I 00:40:53 Operation Successfully Completed! - Duration: 00:27:34I 00:40:53 Average Write Rate: 5.363 KiB/s (4.0x) - Maximum Write Rate: 5.536 KiB/s (4.1x)I 00:40:53 Cycling Tray before Verify...W 00:41:00 Waiting for device to become ready...I 00:41:19 Device Ready!I 00:41:20 Operation Started!I 00:41:20 Source Device: [2:1:0] ATAPI iHAS124 F CL9M (E:) (ATA)I 00:41:20 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)I 00:41:20 Source Media Supported Read Speeds: 4x; 6x; 8x; 12xI 00:41:20 Source Media Supported Write Speeds: 4x; 6x; 8xI 00:41:20 Source Media Sectors: 4.267.024 (Track Path: OTP - L0: 2.133.520 - L1: 2.133.504)I 00:41:20 Source Media Size: 8.738.865.152 bytesI 00:41:20 Image File: C:\Users\Ninowebs\Desktop\Dball\complex-dragon.ball.xenoverse.pal.dvdI 00:41:20 Image File Sectors: 4.267.015 (MODE1/2048)I 00:41:20 Image File Size: 8.738.846.720 bytesI 00:41:20 Image File Volume Identifier: DVD_ROMI 00:41:20 Image File Volume Set Identifier: 89558000MS UDFBridgeI 00:41:20 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)I 00:41:20 Image File Implementation Identifier: Microsoft CDIMAGE UDFI 00:41:20 Image File File System(s): ISO9660; UDF (1.50)I 00:41:20 Read Speed (Data/Audio): MAX / MAXI 00:41:21 Read Speed - Effective: 4,8x - 12x; 12x - 4,8xI 00:41:21 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)I 00:41:21 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)I 00:41:21 Verifying Layer 0... (LBA: 0 - 2133519)I 00:47:36 Verifying Layer 1... (LBA: 2133520 - 4267014)I 00:53:48 Exporting Graph Data...I 00:53:48 Graph Data File: C:\Users\Ninowebs\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_F_CL9M_SABATO-14-OTTOBRE-2017_00-13_MKM-003-00_4x.ibgI 00:53:48 Export Successfully Completed!I 00:53:48 Operation Successfully Completed! - Duration: 00:12:27I 00:53:48 Average Verify Rate: 11.455 KiB/s (8.5x) - Maximum Verify Rate: 16.256 KiB/s (12.0x)
Posted 13 October 2017 - 10:58 PM
So what did you do to get it to work? Just use ImgBurn's default settings and enable the drive's hypertuning? I'm curious now.
Posted 13 October 2017 - 11:07 PM
this by Admin
The important things were to use mkm-003-00 media, burn at 4x and enable the drive's 'force hypertuning' option. and layer break calculate optimal
Edited by ninowebs, 13 October 2017 - 11:11 PM.
Posted 21 October 2017 - 02:31 PM
0 members, 0 guests, 0 anonymous users