Jump to content
Mostresticator

Failed to send cue sheet.... Reason Invalid Field in Parameter List

Recommended Posts

So I've got my master literally almost finished. What the hell am I doing wrong? I left the log down below,

 

 

I 17:00:38 Operation Started!
I 17:00:38 Source File: C:\Users\adam\Documents\Alex.cue
I 17:00:38 Source File Sectors: 169,291 (AUDIO/2352)
I 17:00:39 Source File Size: 398,172,432 bytes
I 17:00:39 Source File Volume Identifier: AJM - AJM
I 17:00:39 Source File File System(s): None
I 17:00:39 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ8E1 8.71 (F:) (SATA)
I 17:00:39 Destination Media Type: CD-R (Disc ID: 97m24s16f, Sony Corp.)
I 17:00:39 Destination Media Supported Write Speeds: 10x, 16x, 20x, 24x
I 17:00:39 Destination Media Sectors: 359,847
I 17:00:39 Write Mode: CD
I 17:00:39 Write Type: SAO
I 17:00:39 Write Speed: MAX
I 17:00:39 Lock Volume: Yes
I 17:00:39 Test Mode: No
I 17:00:39 OPC: No
I 17:00:39 BURN-Proof: Enabled
I 17:00:42 Write Speed Successfully Set! - Effective: 4,234 KB/s (24x)
E 17:00:42 Failed to send Cue Sheet!
E 17:00:42 Reason: Invalid Field in Parameter List
E 17:00:44 Operation Failed! - Duration: 00:00:05
I 17:00:44 Average Write Rate: N/A - Maximum Write Rate: N/A
 

Share this post


Link to post
Share on other sites

TITLE "A"
PERFORMER "AJM"
  FILE "Alex.bin" BINARY
  TRACK 01 AUDIO
    TITLE "1"
    PERFORMER "AJM"
    INDEX 01 00:04:00
  TRACK 02 AUDIO
    TITLE "2"
    PERFORMER "AJM"
    INDEX 01 03:06:02
  TRACK 03 AUDIO
    TITLE "3"
    PERFORMER "AJM"
    INDEX 01 07:58:04
  TRACK 04 AUDIO
    TITLE "4"
    PERFORMER "AJM"
    INDEX 01 18:55:06
  TRACK 05 AUDIO
    TITLE "5"
    PERFORMER "AJM"
    INDEX 01 21:17:08
  TRACK 06 AUDIO
    TITLE "6"
    PERFORMER "AJM"
    INDEX 01 25:59:10
  TRACK 07 AUDIO
    TITLE "7"
    PERFORMER "AJM"
    INDEX 01 31:46:12
  TRACK 08 AUDIO
    TITLE "8"
    PERFORMER "AJM"
    INDEX 01 37:39:16

Share this post


Link to post
Share on other sites

Have you tried using ImgBurn's Create CUE sheet function and imported the source files to see if the CUE file can be created by ImgBurn?  I've noticed some CUE editor applications don't make CUE sheets that work with ImgBurn for burning.  I forget what it was, but I tried a CUE sheet creation software and ImgBurn wouldn't burn the resulting CUE it created.

Share this post


Link to post
Share on other sites

That BIN file is 398,172,432 bytes in size.

 

As a sector is 2352 bytes, that makes 169,291 sectors.

 

The last index in your cue sheet claims it starts at 37:39:16 (MM:SS:FF) within the file.

 

Converting MSF to sectors....

 

(37 * 60 * 75) + (39 * 75) + 16 = sector 169,441

 

Therefore, your last index point is beyond the end of the file.

Share this post


Link to post
Share on other sites

I expect you need to go back to the drawing board and work out where each track really starts.

 

How did you end up with a bin file if you're making what I assume is your own disc?

 

Are the tracks all mixed in? If not, individual WAV files would be better.

 

Even if they are all mixed in, you could still have a single large WAV file. Then open it in any media player and make note of the timer so you can make proper track/index cues.

Share this post


Link to post
Share on other sites

I took the 8 WAV files and made them into one track with track markers on reaper. I burned the tracks onto the CD then I tried to write the cue file onto the CD.

 

Alternatively, I've tried to burn the and write the cue file through imgburn and can't quite get the result I need. I simply need the artist, album, tracks times etc to reflect correctly.

 

Everything with the album is done minus this CD text process.

Share this post


Link to post
Share on other sites

When I follow the tutorial you posted above, I get this message..

 

ConnectionFilters(Source, Sample Grabber) Failed!

 

File Name: C:\Users/A\Documents\Music Folder\Music Files\Song 1.wav

 

Reason: No combination of intermediate filters could be found to make the connection.

 

Hint: You may need to install some addition DirectShow filters in order to support files of this type or the file might be corrupt.

Share this post


Link to post
Share on other sites

What I do in cases like this is I use some kind of conversion software and convert each of the WAV files to new individual WAV's, without any changes to the source input.  Generally, this fixes any sort of input problems I have with creating CUE sheets with ImgBurn.

Share this post


Link to post
Share on other sites

Try 4dots Free Audio Converter.  I believe that has worked for me before in the past; I currently have it installed, anyway.  I also have Hamster Audio Converter installed, but I don't know if I've ever used it for fixing this case.  Both utilities are freeware.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×