Jump to content

BluRay Burn Trouble


aloom127

Recommended Posts

Tried burning BluRay from ImgBurn for the first time today. I'm trying to get this burned in time for a screening next week.

 

The source file is an MP4 with AAC audio. 27m long, about 2GB in size.

 

I followed this tutorial: https://www.howtogeek.com/310705/how-to-burn-any-video-file-to-a-playable-blu-ray-disc/

 

I used tsMuxeR to create the BluRay iso disk image, as instructed by the tutorial.

 

Any help would be most welcome! Thanks. Here is the log from the burn:

 

I 11:52:18 ImgBurn Version 2.5.8.0 started!
I 11:52:18 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 11:52:18 Total Physical Memory: 16,667,740 KiB  -  Available: 9,657,180 KiB
I 11:52:18 Initialising SPTI...
I 11:52:18 Searching for SCSI / ATAPI devices...
W 11:52:18 No devices detected!
W 11:53:19 Device Arrival Detected!
I 11:53:19 Searching for SCSI / ATAPI devices...
I 11:53:20 -> Drive 1 - Info: TSSTcorp BDDVDW SE-506CB TS02 (F:) (USB 2.0)
I 11:53:20 Found 1 BD-RE XL!
I 11:59:26 Operation Started!
I 11:59:26 Source File: C:\Users\Adam Loomis\The Rookie Season3.iso
I 11:59:26 Source File Sectors: 1,092,320 (MODE1/2048)
I 11:59:26 Source File Size: 2,237,071,360 bytes
I 11:59:26 Source File Volume Identifier: RookieSeason
I 11:59:26 Source File Volume Set Identifier: 0C3166F8        RookieSeason
I 11:59:26 Source File Application Identifier: tsMuxeR 2.6.12
I 11:59:26 Source File Implementation Identifier: tsMuxeR 5a4f5438
I 11:59:27 Source File File System(s): UDF (2.50)
I 11:59:27 Destination Device: [0:0:0] TSSTcorp BDDVDW SE-506CB TS02 (F:) (USB)
I 11:59:27 Destination Media Type: BD-R (Disc ID: RITEK-BR2-000)
I 11:59:27 Destination Media Supported Write Speeds: 2x, 4x
I 11:59:27 Destination Media Sectors: 12,219,392
I 11:59:27 Write Mode: BD
I 11:59:27 Write Type: DAO
I 11:59:27 Write Speed: MAX
I 11:59:27 Hardware Defect Management Active: No
I 11:59:27 BD-R Verify Not Required: Yes
I 11:59:27 Link Size: Auto
I 11:59:27 Lock Volume: Yes
I 11:59:27 Test Mode: No
I 11:59:27 OPC: No
I 11:59:27 BURN-Proof: Enabled
I 11:59:27 Write Speed Successfully Set! - Effective: 17,984 KB/s (4x)
I 11:59:52 Filling Buffer... (80 MiB)
I 11:59:52 Writing LeadIn...
I 11:59:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 1092319)
I 11:59:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1092319)
I 12:03:21 Synchronising Cache...
I 12:03:22 Closing Track...
I 12:03:23 Finalising Disc...
I 12:03:37 Exporting Graph Data...
I 12:03:37 Graph Data File: C:\Users\Adam Loomis\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_BDDVDW_SE-506CB_TS02_TUESDAY-JUNE-12-2018_11-59_AM_RITEK-BR2-000_MAX.ibg
I 12:03:37 Export Successfully Completed!
I 12:03:37 Operation Successfully Completed! - Duration: 00:04:10
I 12:03:37 Average Write Rate: 10,605 KiB/s (2.4x) - Maximum Write Rate: 11,642 KiB/s (2.7x)
I 12:03:37 Cycling Tray before Verify...
W 12:03:59 Waiting for device to become ready...
I 12:04:13 Device Ready!
I 12:04:14 Operation Started!
I 12:04:14 Source Device: [0:0:0] TSSTcorp BDDVDW SE-506CB TS02 (F:) (USB)
I 12:04:14 Source Media Type: BD-R (Disc ID: RITEK-BR2-000)
I 12:04:14 Source Media Supported Read Speeds: 2.2x, 4x, 6x
I 12:04:14 Source Media Supported Write Speeds: 2x, 4x
I 12:04:14 Source Media Sectors: 1,092,320
I 12:04:14 Source Media Size: 2,237,071,360 bytes
I 12:04:14 Image File: C:\Users\Adam Loomis\The Rookie Season3.iso
I 12:04:14 Image File Sectors: 1,092,320 (MODE1/2048)
I 12:04:14 Image File Size: 2,237,071,360 bytes
I 12:04:14 Image File Volume Identifier: RookieSeason
I 12:04:14 Image File Volume Set Identifier: 0C3166F8        RookieSeason
I 12:04:14 Image File Application Identifier: tsMuxeR 2.6.12
I 12:04:14 Image File Implementation Identifier: tsMuxeR 5a4f5438
I 12:04:14 Image File File System(s): UDF (2.50)
I 12:04:14 Read Speed (Data/Audio): MAX / MAX
I 12:04:15 Read Speed - Effective: 2.2x - 6x
I 12:04:15 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1092319)
I 12:04:15 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1092319)
I 12:07:26 Exporting Graph Data...
I 12:07:26 Graph Data File: C:\Users\Adam Loomis\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_BDDVDW_SE-506CB_TS02_TUESDAY-JUNE-12-2018_11-59_AM_RITEK-BR2-000_MAX.ibg
I 12:07:26 Export Successfully Completed!
I 12:07:26 Operation Successfully Completed! - Duration: 00:03:10
I 12:07:26 Average Verify Rate: 11,558 KiB/s (2.6x) - Maximum Verify Rate: 13,379 KiB/s (3.0x)
W 12:08:18 Device Removal Detected!
I 12:08:18 Searching for SCSI / ATAPI devices...
W 12:08:18 No devices detected!
W 12:08:51 Device Arrival Detected!
I 12:08:51 Searching for SCSI / ATAPI devices...
I 12:08:51 -> Drive 1 - Info: TSSTcorp BDDVDW SE-506CB TS02 (F:) (USB 2.0)
I 12:08:51 Found 1 BD-RE XL!
W 12:22:28 Device Arrival Detected!
I 12:22:28 Searching for SCSI / ATAPI devices...
I 12:22:28 -> Drive 1 - Info: TSSTcorp BDDVDW SE-506CB TS02 (F:) (USB 2.0)
I 12:22:28 -> Drive 2 - Info: Msft Virtual DVD-ROM 1.0 (H:) (Virtual)
I 12:22:28 Found 1 DVD-ROM and 1 BD-RE XL!
W 12:41:28 Device Removal Detected!
I 12:41:28 Searching for SCSI / ATAPI devices...
W 12:41:28 Device Arrival Detected!
W 12:41:29 The device list will be refreshed at the next available opportunity.
I 12:41:29 -> Drive 1 - Info: TSSTcorp BDDVDW SE-506CB TS02 (F:) (USB 2.0)
I 12:41:29 -> Drive 2 - Info: Msft Virtual DVD-ROM 1.0 (H:) (Virtual)
I 12:41:29 Found 1 DVD-ROM and 1 BD-RE XL!
I 12:41:29 Searching for SCSI / ATAPI devices...
I 12:41:29 -> Drive 1 - Info: TSSTcorp BDDVDW SE-506CB TS02 (F:) (USB 2.0)
I 12:41:29 -> Drive 2 - Info: Msft Virtual DVD-ROM 1.0 (H:) (Virtual)
I 12:41:29 Found 1 DVD-ROM and 1 BD-RE XL!
 
 
Link to comment
Share on other sites

Ok. You didn't actually say that to begin with ;)

 

Your issue isn't really related to ImgBurn / burning. As it burnt and verified ok, the disc should be fine. The rest is down to the source file(s).

 

When you browse the disc in Explorer, what do you see?

Link to comment
Share on other sites

Oops, sorry about that! And thanks for your quick reply by the way. =]

 

So, I've taken three passes at it. The first two tries both failed in seemingly identical ways. The first try, I output an ISO from tsMuxeR; the second, I output a BluRay folder series. But both appear the same on their respective discs, with the following folder types:

 

1. BDMV

2. CERTIFICATE

 

The third pass, I tried creating an ISO from ImgBurn, from the aforementioned mp4. Then I burned the disc. The disc appears to contain an mp4 file, and operates as a data disc, in that it doesn't automatically queue up the film when inserted into the player. That said, it works on the player I have. I'm just concerned it may not work on the player we intend to use at the event. Is there a way to create a typical auto-play BluRay with ImgBurn? 

 

I sincerely apologize for any inaccuracy on my part in depicting the issue.

 

Thanks.

Link to comment
Share on other sites

When you just copy the MP4 to a BD, if your Blu-Ray player supports playing MP4 files, it will play it.

 

 

ImgBurn will make an auto playing Blu-Ray from a BDMV and CERTIFICATE combination IF they're both compliant.  IF they're authored correctly to auto start, ImgBurn will create a BD that will automatically play in a Blu-Ray player.  Which is why it's best to have authoring software that doesn't create the ISO itself.  To let ImgBurn create its own ISO.

 

 

Most likely, this muxing software isn't creating compliant content.  Either it doesn't play or it doesn't create proper ISO's for auto play.  Having never used it, I can't say.  If I were going to get such software, I'd get VSO's ConvertXToHD, since I've used ConvertXToDVD for years to create DVD's from video containers.  I think it has a 7 day free unlimited trial.  Although the output may be watermarked.  Couldn't say.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.