Jump to content
webtrdaer

How to burn ISO 8,07 Go (8 672 346 112 octets) on DVD DL

Recommended Posts

Hello,

I have a DL DVD that I have to duplicate.
Basically, it's a Verbatin Dual Layer DVD.

What I do not understand is that the capacity on the DVD is far exceeded: 8.07 GB (8 672 346 112 bytes)

So when I take another DVD for the copied, it tells me that the capacity of my DVD is not big enough.

I have the same concern with ISO

I made an ISO of this DVD, but of course, the ISO is too big for a DVD DL

How is it possible ?

And the basic DVD is a DVD DL verbatim

Optiarc DVD RW AD-5280S 1.G8 (SATA)
Current Profile: DVD + R DL

Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,234,544
Size: 8 672 346 112 bytes
Time: 941: 02: 44 (MM: SS: FF)
MID: MKM-003-00
Supported Write Speeds: 4x; 6x; 8x

DVD ± R DL Boundary Information:
L0 Data Zone Capacity: 2,117,280
Changeable: No
TOC Information:
Session 1 ... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 4234543)
-> LeadOut (LBA: 4234544)

Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Share Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um / bit
Track Density: 0.74 um / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD + R DL
Share Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um / bit
Track Density: 0.74 um / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519

Physical Format Information (Last Recorded):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Share Version: 1
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um / bit
Track Density: 0.74 um / track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,313,887

Layer Information:
Layer 0 Sectors: 2,117,280 (50%)
Layer 1 Sectors: 2,117,264 (50%)

Can you tell me how is it possible to put an ISO bigger than the DVD?

How to copy this DVD?

Thanks for your help

Share this post


Link to post
Share on other sites

DVD+R DL can be overburnt in certain drives. Maybe one of those was used to burn that disc?

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use.