Jump to content

Problems with "Failed to Write Sectors 0 - 31 - Reason: Write Error"


Filippo

Recommended Posts

Hello,

I'm having problem while I'm burning with my LG HL-DT-ST BD-RE  BH16NS40 1.03 (ATA) and Verbatim DataLife Blu-ray Disc BD-R LTH.

 

I'm burning these BD-R from years. Last 50 pcs I bought give me problems:

###

I 17:51:58 ImgBurn Version 2.5.8.0 started!
I 17:51:58 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 17:51:58 Total Physical Memory: 4.185.144 KiB  -  Available: 2.378.468 KiB
I 17:51:58 Initialising SPTI...
I 17:51:58 Searching for SCSI / ATAPI devices...
I 17:51:59 -> Drive 1 - Info: HL-DT-ST BD-RE  BH16NS40 1.03-A0 (D:) (ATA)
I 17:51:59 Found 1 BD-RE XL!
I 17:52:06 Operation Started!
I 17:52:06 Building Image Tree...
I 17:52:20 Calculating Totals...
I 17:52:20 Preparing Image...
I 17:52:20 Contents: 12 Files, 18 Folders
I 17:52:20 Content Type: BD Video
I 17:52:20 Data Type: MODE1/2048
I 17:52:20 File System(s): UDF (2.50)
I 17:52:20 Volume Label: TERMINATOR_2_IL_GIORNO_DEL_GIUDIZIO
I 17:52:20 Size: 23.844.277.570 bytes
I 17:52:20 Sectors: 11.642.722
I 17:52:20 Image Size: 23.845.339.136 bytes
I 17:52:20 Image Sectors: 11.643.232
I 17:52:28 Operation Successfully Completed! - Duration: 00:00:21
I 17:52:30 Operation Started!
I 17:52:30 Source File: -==/\/[BUILD IMAGE]\/\==-
I 17:52:30 Source File Sectors: 11.643.232 (MODE1/2048)
I 17:52:30 Source File Size: 23.845.339.136 bytes
I 17:52:30 Source File Volume Identifier: ONCE_UPON_A_TIME_IN_HOLLYWOOD
I 17:52:30 Source File Volume Set Identifier: 4F978E8300B1A8E2
I 17:52:30 Source File Application Identifier: ImgBurn v2.5.8.0
I 17:52:30 Source File Implementation Identifier: ImgBurn
I 17:52:30 Source File File System(s): UDF (2.50)
I 17:52:30 Destination Device: [4:1:0] HL-DT-ST BD-RE  BH16NS40 1.03 (D:) (ATA)
I 17:52:30 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 17:52:30 Destination Media Supported Write Speeds: 4x; 6x; 8x; 10x; 12x
I 17:52:30 Destination Media Sectors: 12.219.392
I 17:52:30 Write Mode: BD
I 17:52:30 Write Type: DAO
I 17:52:30 Write Speed: 6x
I 17:52:30 Hardware Defect Management Active: No
I 17:52:30 BD-R Verify Not Required: Yes
I 17:52:30 Link Size: Auto
I 17:52:30 Lock Volume: Yes
I 17:52:31 Test Mode: No
I 17:52:31 OPC: No
I 17:52:31 BURN-Proof: Enabled
I 17:52:31 Write Speed Successfully Set! - Effective: 26.976 KB/s (6x)
I 17:52:42 Filling Buffer... (80 MiB)
I 17:52:44 Writing LeadIn...
W 17:52:53 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 17:52:53 Retrying (1 of 20)...
W 17:53:02 Retry Failed - Reason: Power Calibration Area Error
W 17:53:02 Retrying (2 of 20)...
W 17:53:12 Retry Failed - Reason: Power Calibration Area Error
W 17:53:12 Retrying (3 of 20)...
W 17:53:21 Retry Failed - Reason: Power Calibration Area Error
W 17:53:21 Retrying (4 of 20)...
W 17:53:31 Retry Failed - Reason: Power Calibration Area Error
W 17:53:31 Retrying (5 of 20)...
W 17:53:40 Retry Failed - Reason: Power Calibration Area Error
W 17:53:40 Retrying (6 of 20)...
W 17:53:49 Retry Failed - Reason: Power Calibration Area Error
W 17:53:49 Retrying (7 of 20)...
W 17:53:59 Retry Failed - Reason: Power Calibration Area Error
W 17:53:59 Retrying (8 of 20)...
W 17:54:08 Retry Failed - Reason: Power Calibration Area Error
W 17:54:08 Retrying (9 of 20)...
W 17:54:18 Retry Failed - Reason: Power Calibration Area Error
W 17:54:18 Retrying (10 of 20)...
W 17:54:27 Retry Failed - Reason: Power Calibration Area Error
W 17:54:27 Retrying (11 of 20)...
W 17:54:37 Retry Failed - Reason: Power Calibration Area Error
W 17:54:37 Retrying (12 of 20)...
W 17:54:46 Retry Failed - Reason: Power Calibration Area Error
W 17:54:46 Retrying (13 of 20)...
W 17:54:56 Retry Failed - Reason: Power Calibration Area Error
W 17:54:56 Retrying (14 of 20)...
W 17:55:05 Retry Failed - Reason: Power Calibration Area Error
W 17:55:05 Retrying (15 of 20)...
W 17:55:15 Retry Failed - Reason: Power Calibration Area Error
W 17:55:15 Retrying (16 of 20)...
W 17:55:24 Retry Failed - Reason: Power Calibration Area Error
W 17:55:24 Retrying (17 of 20)...
W 17:55:34 Retry Failed - Reason: Power Calibration Area Error
W 17:55:34 Retrying (18 of 20)...
W 17:55:43 Retry Failed - Reason: Power Calibration Area Error
W 17:55:43 Retrying (19 of 20)...
W 17:55:53 Retry Failed - Reason: Power Calibration Area Error
W 17:55:53 Retrying (20 of 20)...
W 17:56:03 Retry Failed - Reason: Power Calibration Area Error
E 17:56:08 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
I 17:56:08 Synchronising Cache...
W 17:56:43 User opted to skip the 'Close Track/Session/Disc' functions.
E 17:56:43 Failed to Write Image!
E 17:56:43 Operation Failed! - Duration: 00:04:13
I 17:56:43 Average Write Rate: N/A - Maximum Write Rate: N/A
I 17:57:21 Operation Started!
I 17:57:21 Building Image Tree...
I 17:57:24 Calculating Totals...
I 17:57:24 Preparing Image...
I 17:57:24 Contents: 12 Files, 18 Folders
I 17:57:24 Content Type: BD Video
I 17:57:24 Data Type: MODE1/2048
I 17:57:24 File System(s): UDF (2.50)
I 17:57:24 Volume Label: ONCE_UPON_A_TIME_IN_HOLLYWOOD
I 17:57:24 Size: 23.844.277.570 bytes
I 17:57:24 Sectors: 11.642.722
I 17:57:24 Image Size: 23.845.339.136 bytes
I 17:57:24 Image Sectors: 11.643.232
I 17:57:26 Operation Successfully Completed! - Duration: 00:00:04
I 17:57:29 Operation Started!
I 17:57:29 Source File: -==/\/[BUILD IMAGE]\/\==-
I 17:57:29 Source File Sectors: 11.643.232 (MODE1/2048)
I 17:57:29 Source File Size: 23.845.339.136 bytes
I 17:57:29 Source File Volume Identifier: ONCE_UPON_A_TIME_IN_HOLLYWOOD
I 17:57:29 Source File Volume Set Identifier: 4F978F2A00B1A8E2
I 17:57:29 Source File Application Identifier: ImgBurn v2.5.8.0
I 17:57:29 Source File Implementation Identifier: ImgBurn
I 17:57:29 Source File File System(s): UDF (2.50)
I 17:57:29 Destination Device: [4:1:0] HL-DT-ST BD-RE  BH16NS40 1.03 (D:) (ATA)
I 17:57:29 Destination Media Type: BD-R (Disc ID: CMCMAG-BA5-000)
I 17:57:29 Destination Media Supported Write Speeds: 4x; 6x; 8x; 10x; 12x
I 17:57:29 Destination Media Sectors: 11.643.232
I 17:57:29 Write Mode: BD
I 17:57:29 Write Type: DAO
I 17:57:29 Write Speed: 2x
I 17:57:29 Hardware Defect Management Active: No
I 17:57:29 BD-R Verify Not Required: Yes
I 17:57:29 Link Size: Auto
I 17:57:29 Lock Volume: Yes
I 17:57:29 Test Mode: No
I 17:57:29 OPC: No
I 17:57:29 BURN-Proof: Enabled
W 17:57:29 Write Speed Miscompare! - Wanted: 8.991 KB/s (2x), Got: 17.984 KB/s (4x)
W 17:57:29 The drive only supports writing these discs at 4x; 6x; 8x; 10x; 12x.
I 17:57:29 Filling Buffer... (80 MiB)
I 17:57:30 Writing LeadIn...
W 17:57:36 Failed to Write Sectors 0 - 31 - Reason: Write Error
W 17:57:36 Retrying (1 of 20)...
I 17:57:38 Writing LeadIn...
I 17:57:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 11643231)
I 17:57:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11643231)
I 18:19:57 Synchronising Cache...
I 18:20:00 Closing Track...
I 18:20:01 Finalising Disc...
I 18:20:16 Exporting Graph Data...
I 18:20:16 Graph Data File: C:\Users\Anna\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS40_1.03_LUNEDÌ-23-DICEMBRE-2019_17-57_CMCMAG-BA5-000_2x.ibg
I 18:20:16 Export Successfully Completed!
I 18:20:16 Operation Successfully Completed! - Duration: 00:22:47
I 18:20:16 Average Write Rate: 17.403 KiB/s (4.0x) - Maximum Write Rate: 17.730 KiB/s (4.0x)
I 18:20:16 Cycling Tray before Verify...
W 18:20:31 Waiting for device to become ready...
I 18:20:44 Device Ready!
E 18:20:44 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0)
E 18:20:44 Verify Failed! - Reason: Layouts do not match.

###

 

I'm usually burning at 4x speed. If I try to burn at 2x Imgburn says me that the speed is not supported with these disc. If I try to burn at 6x (maximum speed declared for this BD-R) Imgbrun says me  "Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error".

 

Thanks for your help.

Link to comment
Share on other sites

Your first problem is 'outsourced' ''fake'' verbatim's CMCMAG-BA5-000

Your 2nd problem is that you're using LTH type discs. That technology only lasted a short while in production but wax quickly abandoned by most blank/drive manufacturers and hasn't been produced for years now.

Get the good ones 'datalife plus' you can only find online, and NOT the LTH ones

Sent from my Pixel 3 XL using Tapatalk

Link to comment
Share on other sites

I'd second these recommendations.  CMC media just causes all kinds of problems.  And LTH (Low To High) media was more trouble than the price saved in cost.  Even if you got a successful LTH burn, you'd probably be hard pressed to find a Blu-Ray player that would play the disc.  You want the HTL (High To Low) BD.

Link to comment
Share on other sites

  • 3 weeks later...
On 12/23/2019 at 11:00 PM, Ch3vr0n said:

Your first problem is 'outsourced' ''fake'' verbatim's CMCMAG-BA5-000

Your 2nd problem is that you're using LTH type discs. That technology only lasted a short while in production but wax quickly abandoned by most blank/drive manufacturers and hasn't been produced for years now.

Get the good ones 'datalife plus' you can only find online, and NOT the LTH ones

Sent from my Pixel 3 XL using Tapatalk
 

Thanks for your reply.

Verbatim replied to me:

- The disks are original (no fake);

- The disks I bought are mod. 43838 (CMCMAG-BA5-000): Verbatim Italy says these items are HTL.

I’m very confused :(

Link to comment
Share on other sites

They're BRANDED verbatim but made by CMC magnetics. The MID doesn't like. Verbatim outsources some of it's production to CMC (and now even more, considering they bought the brand).

They are verbatim yes but they're the cheap quality (life series) kind. You need the 'datalife plus' ones usually only available online.

You're just new to this, us experienced users know what to look for.

Sent from my Pixel 3 XL using Tapatalk

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.