Jump to content
Sign in to follow this  
ybeard

Frequent failure to verify media

Recommended Posts

Hi there....

 

I've been a longtime user of DVD Decrypter and finally decided to give ImgBurn a try. I use Taiyo Yuden TYG02 -R Value media and it works great with DVD Decrypter. They invariably verify just fine. However, using ImgBurn, I've had 3 of 4 fail verification. Burning the same ISO's using DVD Decrypter results in a perfect burn and verifies correctly.

 

I use a Pioneer 110D w/1.37 FW. I run AnyDVD in the background. My OS is Win2K. I haven't tried removing AnyDVD to see if that makes a difference, but couldn't see why it should if DVD Decrypter works. Obviously, I'm able to burn DVD's with the older software, but I was looking to run the current software in case I happen to buy another writer that the older software might not support.

 

Any clues?

Share this post


Link to post
Share on other sites

Beard, first off theres new firmware for your drive.... 1.41 www.rpc1.org You should update to the lastest available for your burner. I would say that your verifying problems come from using bad media but you are using tys so could you please post a log of the failed burn-verify so the guys can have a closer look at whats happening. help>img logs>copy and paste. Thanks :)

Share this post


Link to post
Share on other sites

From what I can remember, DVD Decrypter just tried to see if the sectors could be read back, it didn't compare the contents of the freshly burnt disc to that of the image file - this is something new to ImgBurn.

 

As it says in the log, AnyDVD can cause issues with the verfiy as it changes stuff on-the-fly. It needs to be disabled when using that function within ImgBurn.

 

Of course what I've said above only really applies if you're getting 'miscompare' errors. If you're getting proper I/O Errors, I'll have to think of something else!

Share this post


Link to post
Share on other sites
From what I can remember, DVD Decrypter just tried to see if the sectors could be read back, it didn't compare the contents of the freshly burnt disc to that of the image file - this is something new to ImgBurn.

 

As it says in the log, AnyDVD can cause issues with the verfiy as it changes stuff on-the-fly. It needs to be disabled when using that function within ImgBurn.

 

Of course what I've said above only really applies if you're getting 'miscompare' errors. If you're getting proper I/O Errors, I'll have to think of something else!

 

Thanks for the reply... I'll try disabling AnyDVD to see if that makes a difference... As requested, I went and got the logs of the failed verify.... I've also gone out and gotten the updated firmware, but think I'll wait until I finish my current burns before I give that a go. Don't want to take a chance to slobberknock my drive on a weekend where I'd have trouble replacing it!

 

 

I 09:52:38 Operation Started!

I 09:52:38 Source File: H:\DVD-ISO\FLINTSTONES.ISO

I 09:52:38 Source File Sectors: 2,285,849 (MODE1/2048)

I 09:52:38 Source File Size: 4,681,418,752 bytes

I 09:52:38 Source File Volume Identifier: FLINTSTONES

I 09:52:38 Source File Implementation Identifier: DVD Shrink

I 09:52:38 Source File File System(s): ISO9660, UDF (1.02)

I 09:52:38 Destination Device: [2:0:0] PIONEER DVD-RW DVR-110D 1.37 (E:) (ATA)

I 09:52:38 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x)

I 09:52:38 Destination Media Sectors: 2,298,496

I 09:52:38 Write Mode: DVD

I 09:52:38 Write Type: DAO

I 09:52:38 Write Speed: 8x

I 09:52:38 Link Size: Auto

I 09:52:38 Test Mode: No

I 09:52:38 BURN-Proof: Enabled

I 09:52:38 Filling Buffer...

I 09:52:38 Writing LeadIn...

I 09:53:13 Writing Image...

I 10:00:57 Synchronising Cache...

I 10:01:09 Image MD5: b1ed86e35b53d32db05b9164458477e9

I 10:01:09 Operation Successfully Completed! - Duration: 00:08:31

I 10:01:09 Average Write Rate: 9,874 KB/s (7.1x) - Maximum Write Rate: 11,132 KB/s (8.0x)

I 10:01:09 Cycling Tray before Verify...

W 10:01:32 Waiting for device to become ready...

I 10:01:34 Device Ready!

I 10:01:34 Operation Started!

I 10:01:34 Source Device: [2:0:0] PIONEER DVD-RW DVR-110D 1.37 (E:) (ATA)

I 10:01:34 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x)

I 10:01:34 Image File: H:\DVD-ISO\FLINTSTONES.ISO

I 10:01:34 Image File Sectors: 2,285,849 (MODE1/2048)

I 10:01:34 Image File Size: 4,681,418,752 bytes

I 10:01:34 Image File Volume Identifier: FLINTSTONES

I 10:01:34 Image File Implementation Identifier: DVD Shrink

I 10:01:34 Image File File System(s): ISO9660, UDF (1.02)

I 10:01:34 Verifying Sectors...

E 10:16:30 Miscompare at LBA: 280, Offset: 35, File: VIDEO_TS\VIDEO_TS.IFO

E 10:16:30 Device: 0x00

E 10:16:30 Image File: 0xC0

E 10:16:30 Total Errors in Sector: 1

E 10:16:30 Failed to Verify Sectors!

E 10:16:30 Operation Failed! - Duration: 00:14:55

I 10:16:30 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 0 KB/s (0.0x)

I 10:16:48 Close Request Acknowledged

I 10:16:48 Closing Down...

I 10:16:48 Shutting down SPTI...

I 10:16:49 ImgBurn closed!

Share this post


Link to post
Share on other sites

Was that verify with or without AnyDVD on? Looks like it was on to me.

 

E 10:16:30 Miscompare at LBA: 280, Offset: 35, File: VIDEO_TS\VIDEO_TS.IFO

 

Turn it off next time you verify and it should be ok.

Share this post


Link to post
Share on other sites
Was that verify with or without AnyDVD on? Looks like it was on to me.

 

E 10:16:30 Miscompare at LBA: 280, Offset: 35, File: VIDEO_TS\VIDEO_TS.IFO

 

Turn it off next time you verify and it should be ok.

 

 

That was with it on before I even posted my original message. I've since turned it off and have been burning some DVD"s. I've burned 3 so far and they've verified fine, so looks like it was the AnyDVD after all. I guess I just didn't realize that the verify on DVD Decrypter wasn't a 'true' verify in a bit for bit sense.

 

Thanks all for the attention and I should have tried turning AnyDVD off in the first place.

Share this post


Link to post
Share on other sites

i to am getting frequen failed to verify..i dont have anydvd enabled (never really have)

i also use verbatims dvd+r DL 2.4x rated

its allways just 1 error and it happens in all different places 8%...27%...93% etc

i am in udma 4 and the buffer never underruns

i will edit with a log next time i burn 1 and verify..

they all read back ok in the pc..they are legit backups of 360 games i own..so far they play fine but i may not have hit an error yet. so i was just wondering if the verify is 100% accurate or if its normal for an odd error here and there..or if there was anything that could intefere with the verify. i have 1 virtual drive installed but nothing running in the background except windows messenger as i allways disable and end processes to maximise my chances of a succesful burn (they arent cheap those DL verbs lol)..

 

my burner is pioneer 111d with 1.29 firmware not crossflashed etc and is only a few weeks old..it burns SL dvd's fine its only on DL i get problems

ty in advance

Share this post


Link to post
Share on other sites

Verify should be 100% accurate, yes.

 

If you get an error when burning + verifying a DVD image, you've got a problem somewhere.

Share this post


Link to post
Share on other sites
If you get an error when burning + verifying a DVD image, you've got a problem somewhere.

i AM burning to + dvd+r DL verbatims..and i am verifying from an iso created from the original game so shouldnt be any corruption etc

 

dont suppose anyone has a link to troubleshooting such an issue? i thought i had done everything right..i installed force aspi..i uninstalled the via ide controller..i have latest firmware..i exit all non essential prgrams while burning. i buy decent media..i have replaced all the ide cables..i have the burner on its own ide set to master..i have read somewhere about a M$ burning service being disabled but cannot find page anymore lol

out of 9 burns all verbatims under the conditions mentioned above 7 have failed verification..that seems a lot to me if your saying verification is 100% accurate

 

so if anyone has a definitive guide to burning problems please feel free to share

Edited by hetster

Share this post


Link to post
Share on other sites

hetster, check out the FAQ section of forum. Cornholio 7 has an excellent guide on there with pics which should answer your question. :)

Share this post


Link to post
Share on other sites

hmm only faq there is from lightning uk and none of them pertain to my problem.

i searched for posts by Cornholio 7 and managed to get to page 8 still with no faq lol..are you sure it was Cornholio 7

Share this post


Link to post
Share on other sites

my mistake hetster, its in the guides section. >_<:rolleyes:

Share this post


Link to post
Share on other sites

i will post as soon as i buy another game to backup..then again i might just burn 1 i allready have again..i know its a waste of a disk but this is starting to bug me now lol..

i feel i am doing everything right but still get failed verification.

 

@kevdriver. those guides as useful as they are have nothing to do with my problems and i actualy know how to use imageburn..its the verification i'm haviing problems with..but any input is input so i am grateful

Share this post


Link to post
Share on other sites
Verify should be 100% accurate, yes.

 

If you get an error when burning + verifying a DVD image, you've got a problem somewhere.

 

 

hetster,

 

Can't you post a log of one of your burns + verify failing.

 

Hetster, This is why your being asked to post a complete log of a failed burn/verify. These logs include lots of info that could show why your verifys aren't 100%. :) I have the same burner as you so I too am interested in what may be causing this problem for you..... :huh:

Share this post


Link to post
Share on other sites

i didnt have a log to hand..so i just reburnt a game and would ya believe it. it didnt fail ths time lol..so thats 7 outta 10..they are too expensive to just burn any ld rubbish to lol..

the second i have 1 that fails i will post the results here..but then again that was a copy of a copy..i think it may be the way 360 games have security sectors etc that may be why its failing to verify as these are from original games that i own..NOT i repeat NOT downloaded ones etc so they have all the security sectors still in..it might just be coincidence that original 360 games fail to verify but a backup of a backup passes..but untill i get a log i'll reserve any judgement..

thanks to everyone so far..especialy lightning UK (no offence kev driver lol) its not often you get the authors of the software itself helping in forums..keep up the good work i'm very happy with imgburn on SL and hopefully DL soon lol

Edited by hetster

Share this post


Link to post
Share on other sites

You don't have to burn another disc, ImgBurn saves the logs for you. You can retrieve yours by Help>img logs>and then copy/paste the last one with an error here :)

Share this post


Link to post
Share on other sites
I 08:32:10 ImgBurn Version 2.1.0.0 started!
I 08:32:10 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 08:32:10 Initialising SPTI...
I 08:32:10 Searching for SCSI / ATAPI devices...
I 08:32:10 Found 2 DVD-ROMs and 1 DVD?RW!
I 08:32:53 Operation Started!
I 08:32:53 Source File: C:\Documents and Settings\hetsters\Desktop\ice\justcause.dvd
I 08:32:53 Source File Sectors: 3,697,696 (MODE1/2048)
I 08:32:53 Source File Size: 7,572,881,408 bytes
I 08:32:53 Source File Volume Identifier: XBOX360
I 08:32:53 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 08:32:54 Source File File System(s): ISO9660, UDF (1.02)
I 08:32:54 Destination Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 08:32:54 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 08:32:54 Destination Media Sectors: 4,173,824
I 08:32:54 Write Mode: DVD
I 08:32:54 Write Type: DAO
I 08:32:54 Write Speed: 2.4x
I 08:32:54 Link Size: Auto
I 08:32:54 Test Mode: No
I 08:32:54 BURN-Proof: Enabled
I 08:32:54 User Specified L0 Data Zone Capacity: 1,913,760
I 08:33:17 Filling Buffer...
I 08:33:18 Writing LeadIn...
I 08:33:20 Writing Image...
I 08:33:20 Writing Layer 0... (LBA: 0 - 1913759)
I 08:53:18 Writing Layer 1... (LBA: 1913760 - 3697695)
I 09:11:57 Synchronising Cache...
I 09:11:58 Closing Track...
I 09:12:03 Finalising Disc...
I 09:14:22 Image MD5: b034e389471737acc43decc5a580a13b
I 09:14:22 Operation Successfully Completed! - Duration: 00:41:28
I 09:14:22 Average Write Rate: 3,191 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x)
I 09:14:22 Cycling Tray before Verify...
I 09:14:47 Device Ready!
I 09:14:47 Operation Started!
I 09:14:47 Source Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 09:14:47 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 09:14:47 Image File: C:\Documents and Settings\hetsters\Desktop\ice\justcause.dvd
I 09:14:47 Image File Sectors: 3,697,696 (MODE1/2048)
I 09:14:47 Image File Size: 7,572,881,408 bytes
I 09:14:47 Image File Volume Identifier: XBOX360
I 09:14:47 Image File Implementation Identifier: Daikin U.S. Comtec Lab
I 09:14:47 Image File File System(s): ISO9660, UDF (1.02)
I 09:14:47 Verifying Sectors...
W 09:16:48 Miscompare at LBA: 275711, Offset: 38
W 09:16:48 Device: 0x3B
W 09:16:48 Image File: 0x7B
W 09:16:48 Total Errors in Sector: 1
I 09:16:48 Verifying Sectors...
I 09:31:57 Device MD5: 1316c3e97e211e9f25aef121dd18d72e
I 09:31:57 Image MD5: b034e389471737acc43decc5a580a13b
I 09:31:57 Operation Successfully Completed! - Duration: 00:17:10
I 09:31:57 Average Verify Rate: 7,179 KB/s (5.2x) - Maximum Verify Rate: 13,411 KB/s (9.7x)
I 09:35:54 Operation Started!
I 09:35:54 Source File: C:\Documents and Settings\hetsters\Desktop\ice\justcause.dvd
I 09:35:54 Source File Sectors: 3,697,696 (MODE1/2048)
I 09:35:54 Source File Size: 7,572,881,408 bytes
I 09:35:54 Source File Volume Identifier: XBOX360
I 09:35:54 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 09:35:54 Source File File System(s): ISO9660, UDF (1.02)
I 09:35:54 Destination Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 09:35:54 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 09:35:54 Destination Media Sectors: 4,173,824
I 09:35:54 Write Mode: DVD
I 09:35:54 Write Type: DAO
I 09:35:54 Write Speed: 2.4x
I 09:35:54 Link Size: Auto
I 09:35:54 Test Mode: No
I 09:35:54 BURN-Proof: Enabled
I 09:35:55 User Specified L0 Data Zone Capacity: 1,913,760
I 09:36:17 Filling Buffer...
I 09:36:18 Writing LeadIn...
I 09:36:20 Writing Image...
I 09:36:20 Writing Layer 0... (LBA: 0 - 1913759)
I 09:56:11 Writing Layer 1... (LBA: 1913760 - 3697695)
I 10:14:50 Synchronising Cache...
I 10:14:51 Closing Track...
I 10:14:52 Finalising Disc...
I 10:17:10 Image MD5: b034e389471737acc43decc5a580a13b
I 10:17:11 Operation Successfully Completed! - Duration: 00:41:16
I 10:17:11 Average Write Rate: 3,202 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x)
I 10:17:11 Cycling Tray before Verify...
I 10:17:36 Device Ready!
I 10:17:36 Operation Started!
I 10:17:36 Source Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 10:17:36 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 10:17:36 Image File: C:\Documents and Settings\hetsters\Desktop\ice\justcause.dvd
I 10:17:36 Image File Sectors: 3,697,696 (MODE1/2048)
I 10:17:36 Image File Size: 7,572,881,408 bytes
I 10:17:36 Image File Volume Identifier: XBOX360
I 10:17:36 Image File Implementation Identifier: Daikin U.S. Comtec Lab
I 10:17:36 Image File File System(s): ISO9660, UDF (1.02)
I 10:17:36 Verifying Sectors...
I 10:34:37 Device MD5: b034e389471737acc43decc5a580a13b
I 10:34:37 Image MD5: b034e389471737acc43decc5a580a13b
I 10:34:37 Operation Successfully Completed! - Duration: 00:17:01
I 10:34:37 Average Verify Rate: 7,250 KB/s (5.2x) - Maximum Verify Rate: 10,213 KB/s (7.4x)
I 13:11:48 Close Request Acknowledged
I 13:11:48 Closing Down...
I 13:11:48 Shutting down SPTI...
I 13:11:48 ImgBurn closed!

Share this post


Link to post
Share on other sites

and another for good measure

I 22:44:45 ImgBurn Version 2.1.0.0 started!
I 22:44:45 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 22:44:45 Initialising SPTI...
I 22:44:45 Searching for SCSI / ATAPI devices...
I 22:44:47 Found 2 DVD-ROMs and 1 DVD?RW!
I 22:44:55 Operation Started!
I 22:44:55 Source File: C:\Documents and Settings\hetsters\Desktop\ice\fear.dvd
I 22:44:55 Source File Sectors: 3,697,696 (MODE1/2048)
I 22:44:55 Source File Size: 7,572,881,408 bytes
I 22:44:55 Source File Volume Identifier: XBOX360
I 22:44:55 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 22:44:56 Source File File System(s): ISO9660, UDF (1.02)
I 22:44:56 Destination Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 22:44:56 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 22:44:56 Destination Media Sectors: 4,173,824
I 22:44:56 Write Mode: DVD
I 22:44:56 Write Type: DAO
I 22:44:56 Write Speed: 2.4x
I 22:44:56 Link Size: Auto
I 22:44:56 Test Mode: No
I 22:44:56 BURN-Proof: Enabled
I 22:44:56 User Specified L0 Data Zone Capacity: 1,913,760
I 22:45:19 Filling Buffer...
I 22:45:20 Writing LeadIn...
I 22:45:21 Writing Image...
I 22:45:21 Writing Layer 0... (LBA: 0 - 1913759)
I 23:05:31 Writing Layer 1... (LBA: 1913760 - 3697695)
I 23:24:09 Synchronising Cache...
I 23:24:10 Closing Track...
I 23:24:16 Finalising Disc...
I 23:26:35 Image MD5: bd33bc022c003dc2a56febfcbf647e56
I 23:26:35 Operation Successfully Completed! - Duration: 00:41:39
I 23:26:35 Average Write Rate: 3,178 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x)
I 23:26:35 Cycling Tray before Verify...
I 23:27:01 Device Ready!
I 23:27:01 Operation Started!
I 23:27:01 Source Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 23:27:01 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 23:27:01 Image File: C:\Documents and Settings\hetsters\Desktop\ice\fear.dvd
I 23:27:01 Image File Sectors: 3,697,696 (MODE1/2048)
I 23:27:01 Image File Size: 7,572,881,408 bytes
I 23:27:01 Image File Volume Identifier: XBOX360
I 23:27:01 Image File Implementation Identifier: Daikin U.S. Comtec Lab
I 23:27:01 Image File File System(s): ISO9660, UDF (1.02)
I 23:27:01 Verifying Sectors...
I 23:44:02 Device MD5: bd33bc022c003dc2a56febfcbf647e56
I 23:44:02 Image MD5: bd33bc022c003dc2a56febfcbf647e56
I 23:44:02 Operation Successfully Completed! - Duration: 00:17:01
I 23:44:02 Average Verify Rate: 7,250 KB/s (5.2x) - Maximum Verify Rate: 10,213 KB/s (7.4x)
I 23:55:59 Operation Started!
I 23:55:59 Source File: C:\Documents and Settings\hetsters\Desktop\ice\fear.dvd
I 23:55:59 Source File Sectors: 3,697,696 (MODE1/2048)
I 23:55:59 Source File Size: 7,572,881,408 bytes
I 23:55:59 Source File Volume Identifier: XBOX360
I 23:55:59 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 23:55:59 Source File File System(s): ISO9660, UDF (1.02)
I 23:55:59 Destination Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 23:55:59 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 23:55:59 Destination Media Sectors: 4,173,824
I 23:55:59 Write Mode: DVD
I 23:55:59 Write Type: DAO
I 23:55:59 Write Speed: 2.4x
I 23:55:59 Link Size: Auto
I 23:55:59 Test Mode: No
I 23:55:59 BURN-Proof: Enabled
I 23:55:59 User Specified L0 Data Zone Capacity: 1,913,760
I 23:56:22 Filling Buffer...
I 23:56:23 Writing LeadIn...
I 23:56:25 Writing Image...
I 23:56:25 Writing Layer 0... (LBA: 0 - 1913759)
I 00:16:15 Writing Layer 1... (LBA: 1913760 - 3697695)
I 00:34:54 Synchronising Cache...
I 00:34:55 Closing Track...
I 00:34:56 Finalising Disc...
I 00:37:15 Image MD5: bd33bc022c003dc2a56febfcbf647e56
I 00:37:15 Operation Successfully Completed! - Duration: 00:41:16
I 00:37:15 Average Write Rate: 3,202 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x)
I 00:37:15 Cycling Tray before Verify...
I 00:37:40 Device Ready!
I 00:37:40 Operation Started!
I 00:37:40 Source Device: [0:0:0] PIONEER DVD-RW  DVR-111D 1.29 (D:) (ATA)
I 00:37:40 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 00:37:40 Image File: C:\Documents and Settings\hetsters\Desktop\ice\fear.dvd
I 00:37:40 Image File Sectors: 3,697,696 (MODE1/2048)
I 00:37:40 Image File Size: 7,572,881,408 bytes
I 00:37:40 Image File Volume Identifier: XBOX360
I 00:37:40 Image File Implementation Identifier: Daikin U.S. Comtec Lab
I 00:37:40 Image File File System(s): ISO9660, UDF (1.02)
I 00:37:40 Verifying Sectors...
W 01:08:18 Miscompare at LBA: 3584922, Offset: 167
W 01:08:18 Device: 0xD5
W 01:08:18 Image File: 0x55
W 01:08:18 Total Errors in Sector: 1
I 01:08:18 Verifying Sectors...
I 01:09:08 Device MD5: 9af8749309691a3427c0c08dd21f0f67
I 01:09:08 Image MD5: bd33bc022c003dc2a56febfcbf647e56
I 01:09:08 Operation Successfully Completed! - Duration: 00:31:27
I 01:09:08 Average Verify Rate: 3,919 KB/s (2.8x) - Maximum Verify Rate: 10,235 KB/s (7.4x)
I 01:09:15 Close Request Acknowledged
I 01:09:15 Closing Down...
I 01:09:15 Shutting down SPTI...
I 01:09:15 ImgBurn closed!

Edited by hetster

Share this post


Link to post
Share on other sites

as you can see both are gamename.dvd format..that is from otiginal game ripped with a kreon drive.

the lst 1 i did as a test to get a log (thanks lfcrule1972 for the log info) was a backup of a backup ripped with dvddecrypter in the format xbox360.iso and that passed..it may just be originals it fails on but i'd have to check through a lot of logs..

i could not find verbatims in my local town and had to try other DL media (what a mistake lol) and had over 50 failed burns with ricohjpn dye..my burner 111d just doesnt like them and i had 75 blanks of them by all different manufacturers lol..oh well ya live and learn

Share this post


Link to post
Share on other sites
dont suppose anyone has a link to troubleshooting such an issue? i thought i had done everything right..i installed force aspi..i uninstalled the via ide controller

 

Why you using this force aspi and why uninstall via ide controller ?

 

Also i would scan the hard drive your storing your 360 iso files for errors using built in windows error checking tool, just the top box though ( auto fix file system errors)

 

scan3fx.jpg

Edited by dontasciime

Share this post


Link to post
Share on other sites
Why you using this force aspi and why uninstall via ide controller

 

this is just something i have allways done..being a long term member and helper of cdfreaks i know that this is just good practice..the force aspi are the most stable and widely supported..i know a lot of burning problems come from via/nforce ide controllers when to be hones the MS provided ide controllers are quite sufficient..

 

the only other tip i have come accross that i didnt know of myself was the cd burning service in windows but havent looked into that yet

 

scanned c: and passed on

files

indexes

security desciptors

usn jornol

 

then did a full sector scan and i have no bad sectors either..

 

its a strange 1

Edited by hetster

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.