maddog6375 Posted February 10, 2007 Share Posted February 10, 2007 when i burn backup games using imgburner i get to about 51% then this error comes up I/O Error Device[0;0;0] Pioneer dvd-rw DVD-111d 1.23 Scsistatus:0x 02 Interpretation:check condition cdb:2A 00 00iD 36 A0 00 00 20 00 Interpretation Write (10) - sectors 1914528-1914559 Sence Area 70 0005 00 00 00 00 06 00 00 00 00 21 02 00 00 00 00 00 82 00 00 interpretation: invalid Address for Write then when i close it because it failed at the end there is this message finalise Disc Failed! Device [0:0:0] PIONEER DVD-RW DVR-111D 1.23(L: )(USB) Reason: power calibration area error does any 1 know what this means i have copied a game ok using imgburner Link to comment Share on other sites More sharing options...
kevdriver Posted February 10, 2007 Share Posted February 10, 2007 Could you post a log of the failed burn. Could be bad media etc etc........ the lof will give us more info. help>img logs>copy and paste. Link to comment Share on other sites More sharing options...
maddog6375 Posted February 10, 2007 Author Share Posted February 10, 2007 Could you post a log of the failed burn. Could be bad media etc etc........ the lof will give us more info. help>img logs>copy and paste. im not sure if this is the right 1 ; ImgBurn Version 2.1.0.0 - Log ; Saturday, 10 February 2007, 15:16:54 ; \\****************************************// ; ; I 14:46:01 ImgBurn Version 2.1.0.0 started! I 14:46:01 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) W 14:46:01 Drive E:\ (FAT32) does not support single files > 4 GB I 14:46:01 Initialising SPTI... I 14:46:01 Searching for SCSI / ATAPI devices... I 14:46:02 Found 1 DVD-ROM and 2 DVD?RWs! I 14:46:29 Operation Started! I 14:46:29 Source File: C:\Documents and Settings\HP_Administrator\Desktop\IMAGE.dvd I 14:46:29 Source File Sectors: 3,697,696 (MODE1/2048) I 14:46:29 Source File Size: 7,572,881,408 bytes I 14:46:29 Source File Volume Identifier: XBOX360 I 14:46:29 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 14:46:29 Source File File System(s): ISO9660, UDF (1.02) I 14:46:29 Destination Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.23 (L:) (USB) I 14:46:29 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) I 14:46:29 Destination Media Sectors: 4,173,824 I 14:46:29 Write Mode: DVD I 14:46:29 Write Type: DAO I 14:46:29 Write Speed: 2.4x I 14:46:29 Link Size: Auto I 14:46:29 Test Mode: No I 14:46:29 BURN-Proof: Enabled I 14:46:29 Optimal L0 Data Zone Capacity: 1,913,760 I 14:46:29 Optimal L0 Data Zone Method: Copied From Original Disc I 14:46:54 Filling Buffer... I 14:46:55 Writing LeadIn... I 14:46:56 Writing Image... I 14:46:56 Writing Layer 0... (LBA: 0 - 1913759) I 15:06:50 Writing Layer 1... (LBA: 1913760 - 3697695) W 15:07:00 Failed to Write Sectors 1914528 - 1914559 - Power Calibration Area Error W 15:07:00 Retrying (1 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (2 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (3 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (4 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (5 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (6 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (7 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (8 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (9 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (10 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:03 Retrying (11 of 20)... W 15:07:03 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (12 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (13 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (14 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (15 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (16 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (17 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (18 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (19 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:07:04 Retrying (20 of 20)... W 15:07:04 Retry Failed - Invalid Address For Write W 15:11:48 Retrying (21)... W 15:11:48 Retry Failed - Invalid Address For Write W 15:11:49 Retrying (22)... W 15:11:49 Retry Failed - Invalid Address For Write W 15:11:50 Retrying (23)... W 15:11:50 Retry Failed - Invalid Address For Write W 15:11:57 Retrying (24)... W 15:11:57 Retry Failed - Invalid Address For Write E 15:11:58 Failed to Write Sectors 1914528 - 1914559 - Power Calibration Area Error I 15:11:58 Synchronising Cache... I 15:11:59 Closing Track... I 15:12:01 Finalising Disc... W 15:12:47 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Power Calibration Area Error W 15:15:43 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Power Calibration Area Error E 15:15:47 Finalise Disc Failed! - Reason: Power Calibration Area Error E 15:15:47 Failed to Write Image! E 15:15:47 Operation Failed! - Duration: 00:29:18 I 15:15:47 Average Write Rate: 2,551 KB/s (1.8x) - Maximum Write Rate: 3,387 KB/s (2.4x) I 15:16:54 Close Request Acknowledged I 15:16:54 Closing Down... I 15:16:54 Shutting down SPTI... I 15:16:54 ImgBurn closed! ; ; Link to comment Share on other sites More sharing options...
cornholio7 Posted February 10, 2007 Share Posted February 10, 2007 update your drives firmware and use only verbatim for dual layer Link to comment Share on other sites More sharing options...
volvofl10 Posted February 10, 2007 Share Posted February 10, 2007 W 15:11:57 Retry Failed - Invalid Address For Write E 15:11:58 Failed to Write Sectors 1914528 - 1914559 - Power Calibration Area Error bottom line is its your media I 14:46:29 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) the only safe media to use for dual layer is Verbatim , nothing else is as reliable im afraid Link to comment Share on other sites More sharing options...
Recommended Posts