Jump to content
Sign in to follow this  
FeelLikeANut

Miscompare but Drive Corrected?

Recommended Posts

When verifying against an image file, I get several miscompares, but if I say to continue anyway, it later tells me that the drive probably corrected (sometime) because it's wrong in the image file. Does that mean I can safely ignore the miscompare?

 

I 00:19:35 ImgBurn Version 2.3.0.0 started!

I 00:19:35 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 00:19:35 Total Physical Memory: 253,308 KB - Available: 50,008 KB

I 00:19:35 Initialising SPTI...

I 00:19:35 Searching for SCSI / ATAPI devices...

I 00:19:36 Found 1 DVD?RW!

I 00:20:25 Operation Started!

I 00:20:25 Source Device: [0:1:0] _NEC DVD+-RW ND-6500A 203E (D:) (ATA)

I 00:20:25 Source Media Type: CD-R (Disc ID: 97m26s66f) (Speeds: 8x, 16x, 24x)

I 00:20:25 Image File: C:\Documents and Settings\(...).mds

I 00:20:25 Image File Sectors: 285,980 (MODE1/2352)

I 00:20:25 Image File Size: 672,624,960 bytes

I 00:20:25 Image File Volume Identifier: 20061111_210213

I 00:20:25 Image File Application Identifier: ULTRAISO V8.0 CD & DVD IMAGE CREATOR, COPYRIGHT ©2002-2006 EZB SYSTEMS, INC.

I 00:20:25 Image File File System(s): ISO9660, Joliet

I 00:20:25 Verifying Sectors... (LBA: 0 - 285979)

W 00:22:14 Miscompare at LBA: 104507, Offset: 2064, File: Enterprise.WW\EnterWW.cab

W 00:22:14 Device: 0x54

W 00:22:14 Image File: 0xB7

W 00:22:14 Total Errors in Sector: 151

W 00:22:14 Note: The drive probably corrected the EDC Area because it's wrong in the image file.

I 00:22:14 Verifying Sectors...

W 00:22:16 Miscompare at LBA: 104508, Offset: 2064, File: Enterprise.WW\EnterWW.cab

W 00:22:16 Device: 0x93

W 00:22:16 Image File: 0x39

W 00:22:16 Total Errors in Sector: 151

W 00:22:16 Note: The drive probably corrected the EDC Area because it's wrong in the image file.

I 00:22:16 Verifying Sectors...

W 00:22:50 Miscompare at LBA: 150501, Offset: 2067, File: Excel.en-us\ExcelLR.cab

W 00:22:50 Device: 0x70

W 00:22:50 Image File: 0x30

W 00:22:50 Total Errors in Sector: 16

W 00:22:50 Note: The drive probably corrected the EDC Area because it's wrong in the image file.

I 00:22:50 Verifying Sectors...

W 00:22:50 Miscompare at LBA: 150502, Offset: 2064, File: Excel.en-us\ExcelLR.cab

W 00:22:50 Device: 0xE7

W 00:22:50 Image File: 0x94

W 00:22:50 Total Errors in Sector: 152

W 00:22:50 Note: The drive probably corrected the EDC Area because it's wrong in the image file.

I 00:22:50 Verifying Sectors...

W 00:22:51 Miscompare at LBA: 150503, Offset: 3, File: Excel.en-us\ExcelLR.cab

W 00:22:51 Device: 0xFF

W 00:22:51 Image File: 0xB7

W 00:22:51 Total Errors in Sector: 139

W 00:22:51 Note: The drive probably corrected the Sync/Header Area because it's wrong in the image file.

I 00:22:51 Verifying Sectors...

I 00:24:15 Device MD5: 28ac43b0fde22e04def167817c12b5bb

I 00:24:15 Image MD5: 83e38fdc9dd07e8fb16398aedb4efb9d

I 00:24:15 Operation Successfully Completed! - Duration: 00:03:50

I 00:24:15 Average Verify Rate: 2,868 KB/s (19.1x) - Maximum Verify Rate: 4,172 KB/s (27.8x)

Share this post


Link to post
Share on other sites

Basically, yeah.

 

There's an option in the setting to have imgburn ignore everything except the actual 'user data' part of the sector if you want to try again with that enabled - or just use any old file compare program to compare the two folders.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.