Jump to content
Sign in to follow this  
marsbarbabe

Why won't my DVD Player recognise DL discs :( ?

Recommended Posts

PLEASE help.. I'm desperate to have a full sized working version of StarWars Ep3 on a DVD-R DL disc. I have tried several times and wasted a fortune of blank DL discs! Both +r and -r :&

 

I have a Pioneer 110D v1.37 firmware

Have ripped to an .iso using DVD Decrypter (latest/last version)

Using Verbatim DVD-R Dual Layer 8.5Gb discs

 

Have tried burning with DVD Decrypter and now going to try imgburn.

 

When I have tried burning with DVD Decrypter the burn and verification went fine. BUT the darn disc just won't play in my main DVD/burner/Hard Drive player which is a Pioneer DVDR-720H. However the last disc I tried; a DL -R did play in another DVD Player I have. Which is fine for the bedroom BUT I really really want to get a working disc in this DVDR-720H as this is a vital component in my AV system and cannot be changed.

 

I did read somewhere on this forum that people were setting the book type to DVD-ROM. Then I read elsewhere that you can't change this in the Pioneer burners, YET they do burn discs as a DVD-ROM anyway?

 

So my last hope of success comes in the form of imgburn. I just got the lastest version 1.1.0.0 and went to burn another disc. However, after nervously pressing start I get a message saying ...

 

'layer jump recording disabled!

 

Ccannot set the layer break position when burning

 

DVD-DL media in DAO mode.

 

Do you want to continue?'

 

 

.. hmm what do I do? What setting do I need to change?

 

Is this likely to even work for the DVDR-720H player I have? Does anyone else have this player with this problem? I can't find a compatabilty list for it anywhere. Although it plays all my other DVD-R discs fine. Not +r discs.

 

ANY other suggestions would be greatly appreciated.

 

I've only a few more verbatim DL-R and DL +R discs left and will have to call it a day as I can't justify spending anymore money on dual layer coasters.

 

All I wanted to do was sit down and watch episode 3 in its ful (backed-up) glory with the light off and the sound up.

 

 

Thanks all!

MBB

Share this post


Link to post
Share on other sites

when you burned using +r discs , did you choose the .mds file or the .iso file?

Share this post


Link to post
Share on other sites

BOTH - but I don't think the player supoports +r discs anyway. It doesn't play single layer +r discs. I did try it though 'incase' for some reason it might like dual layer ones.

 

 

MBB

Share this post


Link to post
Share on other sites

for d/l the .mds contains the layer break info , but i dont think it works for -r d/l

Share this post


Link to post
Share on other sites

Are you sure that the player supports them ?

 

I've had a look at the pdf manual and it seems to make no mention of DVD-R DL discs. It appears not to support DVD+R/+RW discs either.

 

I've also found recently that bitsetting ability on the Pioneer's is dependant upon the firmware being used, e.g. the latest patched/hacked firmware for my Pioneer DVR-108 (1.20) doesn't have bitsetting ability, got to use the Piodata 1.18.

 

I note that there are a few threads here that discuss the patched/hacked firmware for the DVR-110 models. Some do booksetting while others don't. I also gather just from scanning over some of the posts that the official firmware doesn't do bitsetting.

Share this post


Link to post
Share on other sites

Make sure you use the DVD+R DL discs, NOT the DVD-R DL ones.

 

The drive will change the booktype to DVDROM automatically when you burn on DVD+R DL and you'll also get a layerbreak in the right place - which you can't do with DVD-R DL.

 

Unless your player really just cannot read the media (and that's nothing to do with it just saying it can't - as is often the case if you don't change the booktype), you should not have any problem.

Share this post


Link to post
Share on other sites

Thanks VERY much for the replies guys.

 

Just my luck - haven't got any more DL +Rs - Just ordered a couple more.

 

I'm gonna start praying now; for when they arrive.

 

 

So if this doesn't work - am I stuffed?

 

 

I'll let you know how I get on once the discs are delivered.

 

 

Thanks again

 

MBB

Share this post


Link to post
Share on other sites

SOB! :'(

 

Just wasted ?'s

 

I burned it using DVD+R DL discs and the player says 'Can't Use'

 

Looks like I'm stuffed.

 

Thanks for your help though guys.

 

The most annoying thinig is I think the pioneer 720-H has a pioneer 107 drive in it - which should be able to read them fine.

 

I really hate giving up but might have to, unless anyone else has other ideas?

 

Merry Christmas!

MBB

Share this post


Link to post
Share on other sites

which discs did you buy?

Edited by cornholio7

Share this post


Link to post
Share on other sites

can you try the burned discs on a friends player and confirm to yourself the discs burned ok ? just to satisfy your own mind that its your player thats the problem and not the burner or discs

Share this post


Link to post
Share on other sites

Sorry - I should say that I used verify at all times - t'was OK

 

and yes they play in other players.

 

Stoopid Panasonic DVR720H player!! Grrrr

 

I can't really use another player in addition to this as this is my main DVD player which has a hard drive and ALL the other sockets are taken up with other stuff.

 

Merry Xmas all!

 

 

MBB

Share this post


Link to post
Share on other sites

without google'ing your player. i think pansonic are mostly -R players, and not over keen on DL media anyway.

 

i have 3 pansonic players, and not one of them would play normal 4x verbatim DV5 media properly ( when it came out)

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.