Jump to content

Mixed Media Disc message on 360


jantom415

Recommended Posts

I recently had my 360 drive modded and have been using Imgburn to copy the games with a Sony DL burner. The first 10 or so games copied fine, load and run. Then I started getting the following message with the last few games I copied Mixed Media Disc and they would not load. I purchased a Lite-On DL drive and reset the book but I still get the same message when I load the disc in the 360. When I load the older disc I copied they load fine. I have been using Verbatim DVD+R media but I still ended up with a lot of exspsive coasters. I don't think the problem is with Imgburn!! Any ideas what the problem maybe. Please help

Link to comment
Share on other sites

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log Will this help? jantom415

; Saturday, 18 August 2007, 02:14:11 Thank you for responding

; \\****************************************//

;

;

I 01:33:14 ImgBurn Version 2.3.2.0 started!

I 01:33:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 01:33:14 Total Physical Memory: 785,904 KB - Available: 409,820 KB

W 01:33:14 Drive G:\ (FAT32) does not support single files > 4 GB in size.

W 01:33:14 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 01:33:14 Initialising SPTI...

I 01:33:14 Searching for SCSI / ATAPI devices...

I 01:33:15 Found 1 DVD-ROM and 1 DVD±RW!

W 01:33:15 Failed to focus Panel_ISOWRITE_DestinationDevices

I 01:33:15 Operation Started!

I 01:33:15 Source File: K:\Spiderman\Spiderman.dvd

I 01:33:15 Source File Sectors: 3,697,696 (MODE1/2048)

I 01:33:15 Source File Size: 7,572,881,408 bytes

I 01:33:15 Source File Volume Identifier: XGD2DVD_NTSC

I 01:33:15 Source File Implementation Identifier: Sonic Scenarist 3.1

I 01:33:15 Source File File System(s): ISO9660, UDF (1.02)

I 01:33:15 Destination Device: [1:1:0] SONY DVD RW DW-Q120A PYS1 (E:) (ATA)

I 01:33:15 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)

I 01:33:15 Destination Media Sectors: 4,173,824

I 01:33:15 Write Mode: DVD

I 01:33:15 Write Type: DAO

I 01:33:15 Write Speed: 2x

I 01:33:15 Link Size: Auto

I 01:33:15 Test Mode: No

I 01:33:15 BURN-Proof: Enabled

I 01:33:15 Optimal L0 Data Zone Capacity: 1,913,760

I 01:33:15 Optimal L0 Data Zone Method: Copied From Original Disc

I 01:34:00 Filling Buffer... (20 MB)

I 01:34:01 Writing LeadIn...

I 01:34:03 Writing Image... (LBA: 0 - 3697695)

I 01:34:03 Writing Layer 0... (LBA: 0 - 1913759)

I 01:53:36 Writing Layer 1... (LBA: 1913760 - 3697695)

I 02:11:50 Synchronising Cache...

I 02:11:54 Closing Track...

I 02:11:55 Finalising Disc...

I 02:14:09 Image MD5: 3c05c2cab5eb2e14bcbe669f4c3fb9a1

I 02:14:09 Operation Successfully Completed! - Duration: 00:40:54

I 02:14:09 Average Write Rate: 3,263 KB/s (2.4x) - Maximum Write Rate: 3,413 KB/s (2.5x)

I 02:14:09 Close Request Acknowledged

I 02:14:09 Closing Down...

I 02:14:11 Shutting down SPTI...

I 02:14:11 ImgBurn closed!

;

Link to comment
Share on other sites

You really should verify your burns - at the very least until you know you're not having issues with your chosen media.

 

The log doesn't show any sort of problem so the issue must be with the source file or the playback device - again, a 'verify' would come in handy here to check the disc did actually burn ok.

Link to comment
Share on other sites

Thank you for your help.. I have also been disabling AnyDVD. However, I have had many good burns when it was enabled.

 

I have had problems with the last three games I tried to copy. I copied all three to my hard drive the same day. I would agree there was a problem with the source disc(s) or there was a problem with me that day and I did something wrong. Most likely it was me.

 

I pulled a game off the hard drive I copied 3 or 4 weeks ago and reburned it. When I put it in the 360 it loaded just fine.

 

again thank you for responding and have a great day!!!! jantom415 St. Louis, Mo.

Link to comment
Share on other sites

I always do complete disk when I use xbc. However, when I read the three games that will not load and give me the Mixed Media Disc message I may not have set it to complete disk. Thank you. I will make it a point to check each time I read a source disc.

Link to comment
Share on other sites

Have you ever burned an xbox 360 game? If so have you ever gotten the Mixed Media Message when you tried to load it.

I only use Imgburn with xbc to copy 360 games. Imgburn is new to me. I use AnyDVD, shrink, and Nero Express to do my DVD's.

 

I am learning more and more about xbc and Imgburn so I am hoping I will get the hang of it so I can stop making coasters out of my Verbatim DVD +R DL media.

 

Thank you for your responce and help.

Link to comment
Share on other sites

How was the drive modded and what source files are you using for the discs?

 

The more recent iXtreme firmwares actively work to block a disk booting that it thinks MS can detect. Are you sure the images have the right patches on them for that?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.