Jump to content
Sign in to follow this  
LOCOENG

Retry Failed - Logical Block Address out of Range

Recommended Posts

Something has a hold of my drives and I don't know what it is....Verb +R DL, firmware current for both BenQ 1655 and NEC 3540a. The first warning was the typical "unable to lock drive for exclusive access", which I went to Process Explorer and killed WMP...this was the only thing that would have tried accessing my drives. The BenQ would spit out the disc immediately, so after two tries I put the disc into the NEC and it burned the first layer just fine but failed on the layer break. Selected the best layer break location and checked seamless playback. So where am I now?

 

LB.png

 

I 10:58:05 ImgBurn Version 2.0.0.0 started!
I 10:58:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 10:58:05 Initialising SPTI...
I 10:58:05 Searching for SCSI / ATAPI devices...
I 10:58:06 Found 2 DVD±RWs!
I 10:58:16 Operation Started!
I 10:58:16 Building Image Tree...
I 10:58:16 Checking Directory Depth...
I 10:58:16 Calculating Totals...
I 10:58:16 Preparing Image...
I 10:58:25 Using Layer Break LBA: 1790941 -> 1820848 (VTS_01, PGC: 1, Cell: 18, Vob/Cell ID: 7/1, Time: 00:57:01, SPLIP: Yes)
I 10:58:25 Checking Path Length...
I 10:58:25 Image Size: 7,458,201,600 bytes
I 10:58:25 Image Sectors: 3,641,700
I 10:58:25 Operation Successfully Completed! - Duration: 00:00:09
I 10:58:53 Operation Started!
I 10:58:53 Building Image Tree...
I 10:58:53 Checking Directory Depth...
I 10:58:53 Calculating Totals...
I 10:58:53 Preparing Image...
I 10:59:08 Using Layer Break LBA: 1790941 -> 1820848 (VTS_01, PGC: 1, Cell: 18, Vob/Cell ID: 7/1, Time: 00:57:01, SPLIP: Yes)
I 10:59:08 Checking Path Length...
I 10:59:08 Image Size: 7,458,201,600 bytes
I 10:59:08 Image Sectors: 3,641,700
I 10:59:09 Operation Successfully Completed! - Duration: 00:00:16
I 10:59:10 Operation Started!
I 10:59:10 Source File: -==/\/[BUILD IMAGE]\/\==-
I 10:59:10 Source File Sectors: 3,641,700 (MODE1/2048)
I 10:59:10 Source File Size: 7,458,201,600 bytes
I 10:59:10 Source File Application Identifier: IMGBURN - THE ULTIMATE IMAGE BURNER! (C) 2006 LIGHTNING UK!
I 10:59:10 Source File Implementation Identifier: ImgBurn
I 10:59:10 Source File File System(s): ISO9660, UDF (1.02)
I 10:59:10 Destination Device: [1:0:0] BENQ DVD LS DW1655 BCIB (E:) (ATA)
I 10:59:10 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 10:59:10 Destination Media Sectors: 4,173,824
I 10:59:10 Write Mode: DVD
I 10:59:10 Write Type: DAO
I 10:59:10 Write Speed: 8x
I 10:59:10 Link Size: Auto
I 10:59:10 Test Mode: No
I 10:59:10 BURN-Proof: Enabled
I 10:59:16 Optimal L0 Data Zone Capacity: 1,820,848
I 10:59:16 Optimal L0 Data Zone Method: IFO Cell Boundary
I 10:59:16 Filling Buffer...
I 10:59:17 Writing LeadIn...
W 10:59:21 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
W 10:59:21 Retrying (1 of 20)...
~~~~23 of these~~~~
W 10:59:32 Retrying (23)...
W 10:59:33 Retry Failed - Session Fixation Error Writing Lead In
E 10:59:34 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
I 10:59:34 Synchronising Cache...
I 10:59:35 Closing Track...
I 10:59:36 Finalising Disc...
E 10:59:37 Failed to Write Image!
E 10:59:39 Operation Failed! - Duration: 00:00:27
I 10:59:39 Average Write Rate: N/A - Maximum Write Rate: N/A
I 11:00:52 Operation Started!
I 11:00:52 Building Image Tree...
I 11:00:53 Checking Directory Depth...
I 11:00:53 Calculating Totals...
I 11:00:53 Preparing Image...
I 11:00:56 Using Layer Break LBA: 1790941 -> 1820848 (VTS_01, PGC: 1, Cell: 18, Vob/Cell ID: 7/1, Time: 00:57:01, SPLIP: Yes -> No)
I 11:00:56 Checking Path Length...
I 11:00:56 Image Size: 7,458,201,600 bytes
I 11:00:56 Image Sectors: 3,641,700
I 11:00:57 Operation Successfully Completed! - Duration: 00:00:05
I 11:00:57 Operation Started!
I 11:00:57 Source File: -==/\/[BUILD IMAGE]\/\==-
I 11:00:57 Source File Sectors: 3,641,700 (MODE1/2048)
I 11:00:57 Source File Size: 7,458,201,600 bytes
I 11:00:57 Source File Application Identifier: IMGBURN - THE ULTIMATE IMAGE BURNER! (C) 2006 LIGHTNING UK!
I 11:00:57 Source File Implementation Identifier: ImgBurn
I 11:00:57 Source File File System(s): ISO9660, UDF (1.02)
I 11:00:57 Destination Device: [1:0:0] BENQ DVD LS DW1655 BCIB (E:) (ATA)
I 11:00:57 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)
I 11:00:57 Destination Media Sectors: 4,173,824
I 11:00:57 Write Mode: DVD
I 11:00:57 Write Type: DAO
I 11:00:57 Write Speed: 8x
I 11:00:57 Link Size: Auto
I 11:00:57 Test Mode: No
I 11:00:57 BURN-Proof: Enabled
I 11:02:15 Optimal L0 Data Zone Capacity: 1,820,848
I 11:02:15 Optimal L0 Data Zone Method: IFO Cell Boundary
I 11:02:15 Filling Buffer...
I 11:02:15 Writing LeadIn...
W 11:02:19 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
W 11:02:19 Retrying (1 of 20)...
~~~~20 more~~~~
W 11:02:21 Retrying (20 of 20)...
W 11:02:21 Retry Failed - Session Fixation Error Writing Lead In
E 11:02:23 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
I 11:02:23 Synchronising Cache...
I 11:02:24 Closing Track...
I 11:02:25 Finalising Disc...
E 11:02:26 Failed to Write Image!
E 11:02:28 Operation Failed! - Duration: 00:01:28
I 11:02:28 Average Write Rate: N/A - Maximum Write Rate: N/A
I 11:03:16 Operation Started!
I 11:03:16 Building Image Tree...
I 11:03:17 Checking Directory Depth...
I 11:03:17 Calculating Totals...
I 11:03:17 Preparing Image...
I 11:03:20 Using Layer Break LBA: 1790941 -> 1820848 (VTS_01, PGC: 1, Cell: 18, Vob/Cell ID: 7/1, Time: 00:57:01, SPLIP: Yes)
I 11:03:20 Checking Path Length...
I 11:03:20 Image Size: 7,458,201,600 bytes
I 11:03:20 Image Sectors: 3,641,700
I 11:03:21 Operation Successfully Completed! - Duration: 00:00:04
I 11:03:21 Operation Started!
I 11:03:21 Source File: -==/\/[BUILD IMAGE]\/\==-
I 11:03:21 Source File Sectors: 3,641,700 (MODE1/2048)
I 11:03:21 Source File Size: 7,458,201,600 bytes
I 11:03:21 Source File Application Identifier: IMGBURN - THE ULTIMATE IMAGE BURNER! (C) 2006 LIGHTNING UK!
I 11:03:21 Source File Implementation Identifier: ImgBurn
I 11:03:21 Source File File System(s): ISO9660, UDF (1.02)
I 11:03:21 Destination Device: [1:1:0] _NEC DVD_RW ND-3540A 1.W9 (F:) (ATA)
I 11:03:21 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x)
I 11:03:21 Destination Media Sectors: 4,173,824
I 11:03:21 Write Mode: DVD
I 11:03:21 Write Type: DAO
I 11:03:21 Write Speed: 8x
I 11:03:21 Link Size: Auto
I 11:03:21 Test Mode: No
I 11:03:21 BURN-Proof: Enabled
I 11:03:35 Optimal L0 Data Zone Capacity: 1,820,848
I 11:03:35 Optimal L0 Data Zone Method: IFO Cell Boundary
I 11:03:58 Filling Buffer...
I 11:03:59 Writing LeadIn...
I 11:04:00 Writing Image...
I 11:04:00 Writing Layer 0... (LBA: 0 - 1820847)
I 11:11:41 Writing Layer 1... (LBA: 1820848 - 3641699)
W 11:19:47 Failed to Write Sectors 3641680 - 3641699 - Logical Block Address out of Range
W 11:19:47 Retrying (1 of 20)...
W 11:19:47 Retry Failed - Logical Block Address out of Range
~~~~~and again~~~~~
W 11:19:59 Retry Failed - Logical Block Address out of Range
E 11:20:21 Failed to Write Sectors 3641680 - 3641699 - Logical Block Address out of Range
I 11:20:21 Synchronising Cache...
I 11:20:22 Closing Track...
I 11:20:43 Finalising Disc...
E 11:21:26 Failed to Write Image!
E 11:21:30 Operation Failed! - Duration: 00:18:04
I 11:21:30 Average Write Rate: 7,424 KB/s (5.4x) - Maximum Write Rate: 11,626 KB/s (8.4x)

 

I also forgot to set the speed to 2.4x so this disc was burned too fast, but is that really the problem?

Edited by LOCOENG

Share this post


Link to post
Share on other sites

For someone that's active on the forum I have to ask why on earth are you still on v2.0.0.0 ?!

 

Upgrade and that error will go away.

Share this post


Link to post
Share on other sites

LOL....I tend not to upgrade until the need arises, but I guess there is a need now. Thanks boss. :D

Share this post


Link to post
Share on other sites

Well I got a successful burn with the NEC, but still error out on the BenQ....I get the same unable to unlock for exclusive access error on both drives. What might be causing this?

Share this post


Link to post
Share on other sites
Well I got a successful burn with the NEC, but still error out on the BenQ....I get the same unable to unlock for exclusive access error on both drives. What might be causing this?

Something is "holding" your drive. Doesn't Process Explorer show anything when you search for the cdrom handler?

Also, please use the Filter Driver Load Order option (click the Clipboard button) from the Tools menu and post here the results.

Share this post


Link to post
Share on other sites

I'll do that when I get home, maybe in the next day or two. I didn't search for cd rom handlers, but WMP was the only thing that looked like it may be affecting the drive...I tried killing the process and it would just start back up again. I'll look a little deeper into all this and get back to everyone.

Share this post


Link to post
Share on other sites

The error from the BenQ is it's own problem.

 

The error from the NEC was my fault - that's why you should always update the program.

 

Even if you don't actually have an issues with old versions, there WILL be bugs that you're just not seeing and they could be screwing up all of your discs in ways you can't see yet.

 

You only need to look at the extensive changelogs to see all the things that get fixed / improved - and I don't do that for the good of my health ;)

Share this post


Link to post
Share on other sites
and I don't do that for the good of my health

 

I realize that and all the hard work that you put into your programs is much appreciated. I'm trying not to sound like an old noob when I say that this combination of burners and media has worked in the past without errors or problems....I also know that trying to track down the root of the evil can and will be hard, but then BenQ is a better drive IMHO and I'd like to get it to where I can use it for whatever media I throw at it again.

 

When I get a chance I'll post the filter drivers log and see what is going on in there. TBH I haven't ever taken a look at any of those problem posts to bother learning what is going on there. Recently if I don't know what the problem is by the title of the thread I don't bother looking at it, thus reducing my learning curve...so I'm a bit behind the times if you will.

Share this post


Link to post
Share on other sites

Here is driver information....

 

===============================================

Filter Driver Load Order - ImgBurn v2.3.2.0

===============================================

 

Upper Device Filter: redbook

Upper Class Filter: GEARAspiWDM

Device: CD/DVD-ROM Device

Lower Class Filter: ASAPIW2K

Lower Class Filter: ANYDVD

Lower Class Filter: PXHELP20

Lower Device Filter: [None Found]

 

Filter Name: redbook

File Name: C:\WINDOWS\System32\DRIVERS\redbook.sys

File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: Redbook Audio Filter Driver

Product Name: Microsoft® Windows® Operating System

Product Version: 5.1.2600.2180

Company Name: Microsoft Corporation

Copyright: © Microsoft Corporation. All rights reserved.

 

Filter Name: GEARAspiWDM

File Name: C:\WINDOWS\System32\Drivers\GEARAspiWDM.sys

File Version: 2.0.6.1

File Description: CD/DVD Class Filter Driver

Product Name: GEAR.wrks

Product Version: 8.xx [2.0.6.1]

Company Name: GEAR Software Inc.

Copyright: Copyright © GEAR Software Inc. 2006

 

Filter Name: ASAPIW2K

File Name: C:\WINDOWS\system32\drivers\Asapiw2k.sys

File Version: 6, 0, 0, 1 [6.0.0.1]

File Description: ASAPI

Product Name: asapi

Product Version: 6, 0, 0, 1 [6.0.0.1]

Company Name: VOB Computersysteme GmbH

Copyright: © 1997-2001 by VOB Computersysteme GmbH

 

Filter Name: ANYDVD

File Name: C:\WINDOWS\System32\Drivers\AnyDVD.sys

File Version: 6.1.4.3

File Description: AnyDVD Filter Driver

Product Name: AnyDVD

Product Version: 6.1.4.3

Company Name: SlySoft, Inc.

Copyright: Copyright 2002 - 2007 SlySoft, Inc.

 

Filter Name: PXHELP20

File Name: C:\WINDOWS\System32\DRIVERS\PxHelp20.sys

File Version: 3.00.41a [3.0.41.0]

File Description: Px Engine Device Driver for Windows 2000/XP

Product Name: PxHelp20

Product Version: [2.0.0.0]

Company Name: Sonic Solutions

Copyright: Copyright © Sonic Solutions

Share this post


Link to post
Share on other sites

Loco, I'd get rid of gear and Anydvd filters mate :)

Share this post


Link to post
Share on other sites

I know what where the AnyDVD and GEAR drivers come from, but what, if any program is the ASAPIW2K associated with?

Share this post


Link to post
Share on other sites

Thanks spinner...somehow you always forget about google when you (I) are the one with the questions. :)

 

Pinnacle, my camcorder software will have to go then....pah!

 

I have had trouble with the AnyDVD filters before so I may remove them as well.

Share this post


Link to post
Share on other sites

I honestly don't think you've any need to touch these. The NEC works fine and so in that sense there can't be a problem.

 

I only said to remove the asapi one because the copyright date mentions 2001 - which of course makes it very old - unless they just don't ever update it.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.