Jump to content

Ritek D01 with LG GSA-H55N ImgBurn + Nero


SWIN

Recommended Posts

Dear Sirs!

 

I did not post this to provoke anything.

 

Just, I really do not understand.

 

I have burnt 5 D01 with ImgBurn - all like the one posted.

 

Earlier i always used DVDripper, and now ImgBurn.

 

But, only the Nero supplied with the burner, produces usable results.

 

Latest burn with Nero, can post other scans burned with ImgBurn.

 

neroburn24xpc8.th.png

 

/SWIN

Link to comment
Share on other sites

Here is the log. :plane:

 

Differences and comments:

 

The ImgBurn Build mode was used for the burn, Nero burns where "straight", using supplied software with burner.

 

The burner seems to be locked at 4x with D01, but I tried to slow down the burns by setting the ImgBurn speed down - still burned at 4x.

 

And, of course - the media - I just may have picked the wrong media for the ImgBurn´s - and the right for the Nero burn - from the same cake box.

 

 

/SWIN

 

 

 

 

 

 

 

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Saturday, 22 September 2007, 14:08:18

; \\****************************************//

;

;

I 13:13:39 ImgBurn Version 2.3.2.0 started!

I 13:13:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 13:13:39 Total Physical Memory: 1,047,788 KB - Available: 750,300 KB

W 13:13:39 Drive C:\ (FAT32) does not support single files > 4 GB in size.

I 13:13:39 Initialising SPTI...

I 13:13:39 Searching for SCSI / ATAPI devices...

I 13:13:40 Found 1 CD-RW, 3 DVD-ROMs and 1 DVD±RW/RAM!

I 13:13:55 Operation Started!

I 13:13:55 Building Image Tree...

I 13:13:55 Checking Directory Depth...

I 13:13:55 Calculating Totals...

I 13:13:55 Preparing Image...

I 13:14:09 Using Layer Break LBA: 2051206 -> 2051216 (VTS_01, PGC: 1, Chapter: 13, Cell: 14, Vob/Cell ID: 1/14, Time: 01:08:46, SPLIP: Yes)

I 13:14:09 Checking Path Length...

I 13:14:09 Image Size: 8,265,105,408 bytes

I 13:14:09 Image Sectors: 4,035,696

I 13:14:09 Operation Successfully Completed! - Duration: 00:00:14

I 13:15:45 Operation Started!

I 13:15:45 Building Image Tree...

I 13:15:45 Checking Directory Depth...

I 13:15:45 Calculating Totals...

I 13:15:45 Preparing Image...

I 13:16:00 Using Layer Break LBA: 2051206 -> 2051216 (VTS_01, PGC: 1, Chapter: 13, Cell: 14, Vob/Cell ID: 1/14, Time: 01:08:46, SPLIP: Yes -> No)

I 13:16:00 Checking Path Length...

I 13:16:00 Image Size: 8,265,105,408 bytes

I 13:16:00 Image Sectors: 4,035,696

I 13:16:02 Operation Successfully Completed! - Duration: 00:00:17

I 13:16:02 Operation Started!

I 13:16:02 Image Contents: 40 Files, 2 Folders

I 13:16:02 Image Sectors: 4,035,696

I 13:16:02 Image Size: 8,265,105,408 bytes

I 13:16:02 Image Layer Break Position: 2,051,216

I 13:16:02 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496)

I 13:16:02 Image Double Layer Profile: DVD+R DL (Min L0: 0, Max L0: 2,086,912, Media Capacity: 4,173,824)

I 13:16:02 Image Volume Identifier: BTTF_III

I 13:16:02 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 13:16:02 Image Implementation Identifier: ImgBurn

I 13:16:02 Image File System(s): ISO9660, UDF (1.02)

I 13:16:02 Destination File: E:\Nero IMG\BTTF_3.iso

I 13:16:02 Destination Free Space: 55,793,250,304 bytes (54,485,596 KB) (53,208 MB) (51 GB)

I 13:16:02 Destination File System: NTFS

I 13:16:02 File Splitting: Auto

I 13:16:02 Writing Image...

I 13:23:49 Image MD5: 9413598eef7b5e25d53098012c0126d2

I 13:23:49 Operation Successfully Completed! - Duration: 00:07:47

I 13:23:49 Average Write Rate: 17,283 KB/s (12.5x) - Maximum Write Rate: 30,259 KB/s (21.8x)

I 13:25:38 Operation Started!

I 13:25:38 Source File: E:\Nero IMG\BTTF_3.mds

I 13:25:38 Source File Sectors: 4,035,696 (MODE1/2048)

I 13:25:38 Source File Size: 8,265,105,408 bytes

I 13:25:38 Source File Volume Identifier: BTTF_III

I 13:25:38 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 13:25:38 Source File Implementation Identifier: ImgBurn

I 13:25:38 Source File File System(s): ISO9660, UDF (1.02)

I 13:25:38 Destination Device: [1:1:0] HL-DT-ST DVD-RAM GSA-H55N 1.02 (G:) (ATA)

I 13:25:38 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 4x)

I 13:25:38 Destination Media Sectors: 4,173,824

I 13:25:38 Write Mode: DVD

I 13:25:38 Write Type: DAO

I 13:25:38 Write Speed: 1x

I 13:25:38 Link Size: Auto

I 13:25:38 Test Mode: No

I 13:25:38 BURN-Proof: Enabled

I 13:25:38 Optimal L0 Data Zone Capacity: 2,051,216

I 13:25:38 Optimal L0 Data Zone Method: Copied From Original Disc

I 13:25:39 Filling Buffer... (40 MB)

I 13:25:39 Writing LeadIn...

I 13:26:09 Writing Image... (LBA: 0 - 4035695)

I 13:26:09 Writing Layer 0... (LBA: 0 - 2051215)

I 13:39:30 Writing Layer 1... (LBA: 2051216 - 4035695)

I 13:51:57 Synchronising Cache...

I 13:52:20 Closing Track...

I 13:52:59 Finalising Disc...

I 13:53:37 Image MD5: 9413598eef7b5e25d53098012c0126d2

I 13:53:37 Operation Successfully Completed! - Duration: 00:27:58

I 13:53:37 Average Write Rate: 5,217 KB/s (3.8x) - Maximum Write Rate: 5,592 KB/s (4.0x)

I 14:08:18 Close Request Acknowledged

I 14:08:18 Closing Down...

I 14:08:18 Shutting down SPTI...

I 14:08:18 ImgBurn closed!

Link to comment
Share on other sites

4x is the only write strategy for those disc's with your burner so you cannot burn slower with any software.

 

The media you have is hit and miss and no decent quality control over what they put into the cake box.

 

If your serious about using dual layer and wanting to at least stand 99% chance of being able to read it back / archive and know the data is good then buy verbatim 2.4x

Link to comment
Share on other sites

Thank you dontasciime!

 

Well, D01 costs less than 1 €, so if you burn lots of DL, anything else is expensive.

 

Still strange - 5 ImgBurn´s in a row, just barely readable in the beginning, and then all other with Nero -> burns OK.

 

/SWIN

Link to comment
Share on other sites

Have ImgBurn verify the disc as part of the burn.

 

It too will keep a record of read/write speeds that you can display in a pretty graph using DVDInfoPro (see the 'drives and media' forum for examples).

 

You might also like to try setting the 'Write Type' to 'Incremental' within ImgBurn's settings window - on the 'Write' tab.

 

Some weird drives can perform better using that rather than DAO.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.