Jump to content

Help!!!XBOX360 Rom Burning Problem


wanghiking

Recommended Posts

I have a Benq dual layer DVD burner, and I use the newest edition of Imgburn to burn XBOX360's D9 rom.

 

But starting from yesterday, I already wasted 10 dual layer blank disks, as each time I was using Imgburn, in writing lead in, always failed as "Session Fixation Error Writing Lead In", no disk can be burned any more. While if I use the same burner for D5 or CD, it's working.

 

I need to indenty where the problem is. Whether it's my system problem? Software problem or my Dvd burner problem?

 

Can anyone give me a hand?

 

Thank you.

Link to comment
Share on other sites

The log as follows:

 

I 05:52:30 Found 1 DVD-ROM/CD-RW and 1 DVD±RW!

I 05:52:53 Operation Started!

I 05:52:53 Source File: F:\Mass_Effect_USA_XBOX360-PROTOCOL\ptc-me.dvd

I 05:52:53 Source File Sectors: 3,825,924 (MODE1/2048)

I 05:52:53 Source File Size: 7,835,492,352 bytes

I 05:52:53 Source File Volume Identifier: XGD2DVD_NTSC

I 05:52:53 Source File Implementation Identifier: Sonic Scenarist 3.1

I 05:52:53 Source File File System(s): ISO9660, UDF (1.02)

I 05:52:53 Destination Device: [0:0:0] BENQ DVD DD EW162I 47N9 (K:) (USB)

I 05:52:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

I 05:52:53 Destination Media Sectors: 4,173,824

I 05:52:53 Write Mode: DVD

I 05:52:53 Write Type: DAO

I 05:52:53 Write Speed: MAX

I 05:52:53 Link Size: Auto

I 05:52:53 Test Mode: No

I 05:52:53 BURN-Proof: Enabled

I 05:52:53 Optimal L0 Data Zone Capacity: 1,913,760

I 05:52:53 Optimal L0 Data Zone Method: Copied From Original Disc

I 05:52:54 Filling Buffer... (40 MB)

I 05:52:56 Writing LeadIn...

W 05:53:10 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In

W 05:53:10 Retrying (1 of 20)...

W 05:57:42 Retry Failed - Power Calibration Area Is Full

E 05:57:55 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In

I 05:57:55 Synchronising Cache...

I 05:57:56 Closing Track...

I 05:57:57 Finalising Disc...

E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB

I 05:57:59 Finalising Disc (Last Attempt!)...

E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB

E 05:57:59 Failed to Write Image!

E 05:57:59 Operation Failed! - Duration: 00:05:05

I 05:57:59 Average Write Rate: N/A - Maximum Write Rate: N/A

I 05:58:10 Close Request Acknowledged

I 05:58:10 Closing Down...

I 05:58:10 Shutting down SPTI...

I 05:58:10 ImgBurn closed!

Link to comment
Share on other sites

Google 'RITEK-S04-66' and you get 10 hits. There's no way that dye has been around for a year.

 

You might well have been burning A RITEK dye but it wasn't that specific one.

 

Get some media that's known to be decent - i.e. the Verbs I suggested earlier and try again.

 

If they fail too then yeah it's your drive.

Link to comment
Share on other sites

hardware fails thats a fact ,but the last good media Ritek made was their GO4 -R 3-4 years ago the GO5's and newer have been crap.Like LUK said give the Verbs a try worse case is its the drive but you'll still have some excellent media at hand

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.