Jump to content
Sign in to follow this  
baliistik

cyclic redundancy check error?

Recommended Posts

I 12:17:27 ImgBurn Version 2.3.2.0 started!

I 12:17:27 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 12:17:27 Total Physical Memory: 261,100 KB - Available: 83,720 KB

W 12:17:27 Drive G:\ (FAT32) does not support single files > 4 GB in size.

I 12:17:28 Initialising SPTI...

I 12:17:28 Searching for SCSI / ATAPI devices...

I 12:17:29 Found 1 CD-RW, 1 DVD-ROM and 1 DVD±RW!

I 12:17:30 Operation Started!

I 12:17:30 Source File: G:\DVD ISO's\THE_FOX_AND_THE_HOUND.MDS

I 12:17:30 Source File Sectors: 2,285,838 (MODE1/2048)

I 12:17:30 Source File Size: 4,681,396,224 bytes

I 12:17:30 Source File Volume Identifier: THE_FOX_AND_THE_HOUND

I 12:17:30 Source File Implementation Identifier: DVD Shrink

I 12:17:30 Source File File System(s): ISO9660, UDF (1.02)

I 12:17:30 Destination Device: [0:0:0] SONY DVD RW DRU-720A JY02 (I:) (USB)

I 12:17:30 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 6x, 8x, 12x, 16x)

I 12:17:30 Destination Media Sectors: 2,297,888

I 12:17:30 Write Mode: DVD

I 12:17:30 Write Type: DAO

I 12:17:30 Write Speed: MAX

I 12:17:30 Link Size: Auto

I 12:17:30 Test Mode: No

I 12:17:30 BURN-Proof: Enabled

I 12:17:32 Filling Buffer... (20 MB)

I 12:17:33 Writing LeadIn...

I 12:18:56 Writing Image... (LBA: 0 - 2285837)

E 12:26:36 Failed to read from file: THE_FOX_AND_THE_HOUND.I03

E 12:26:36 Reason: Data error (cyclic redundancy check).

I 20:35:12 Synchronising Cache...

E 20:35:48 Failed to Write Image!

E 20:35:53 Operation Failed! - Duration: 08:18:18

I 20:35:53 Average Write Rate: 123 KB/s (0.1x) - Maximum Write Rate: 10,082 KB/s (7.3x)

I 22:15:45 Close Request Acknowledged

I 22:15:45 Closing Down...

I 22:15:45 Shutting down SPTI...

I 22:15:46 ImgBurn closed!

 

had a couple failed burns w/imgburn not sure why cyclic redundancy check error is occurs!.?..

 

Joey_Baliistik

Share this post


Link to post
Share on other sites

You have a problem READING from the hdd (or wherever that 'THE_FOX_AND_THE_HOUND.I03' file is stored).

 

Time to run chkdsk on the drive. Hopefully it's not screwed or you'll need to start looking at buying a new one.

Share this post


Link to post
Share on other sites
You have a problem READING from the hdd (or wherever that 'THE_FOX_AND_THE_HOUND.I03' file is stored).

 

Time to run chkdsk on the drive. Hopefully it's not screwed or you'll need to start looking at buying a new one.

 

 

Thanks Lightning Uk... Better my hard drive then my burner, its cheaper lol. .. anyways ill post my results after checking and on a side note IMGBURN is awesome!, and being free is a bonus!, ill donate in the future (after winter, hours suck this season).......

 

Baliistik

Share this post


Link to post
Share on other sites

Actually a new burner would be at least half the price of a new HDD, depending on how big the HDD the savings could be an even greater over a new burner.

Share this post


Link to post
Share on other sites
Actually a new burner would be at least half the price of a new HDD, depending on how big the HDD the savings could be an even greater over a new burner.

 

 

My HDD is a 100g external (IOMEGA) and it was 100 something and my Sony external burner was over 200!, but ya your right, HDD's are spendy, but getting better, my cuz just got a terrabite for 400 i think, or right around there!

 

 

Joey_Baliistik

Share this post


Link to post
Share on other sites

I also have been getting this error about 1 out of every 5 discs I'm using. There Maxell DVD+R 4.7GB, I've never ran into problems before, I recently bought 200 of them (10 I've scrapped, I don't care that much though, he it just confuses me). I upgraded to, a WD 500GB External, and a LG LightScribe burner (internal). Now, if I try to reburn the same iso, it gives the same error, I never really thought about it till I read this thread, but If I burn that exact same iso with VSO Blindwrite or something else it does fine. The only time I've had a problem with imgburn is after I got a new burner and new HD, and the images are coming from the external drive. Is this a media issue, I can't see it being anything else, unless I need to tweak some settings in Imgburn, and yes I know 1st rule no LoG = chair.gif

Share this post


Link to post
Share on other sites

i would try burning the same iso to a verbatim or taiyo yuden disc and see if you get the same result.

 

a log would show us the MID , you can find it under help->imgburn logs, just copy/paste the relevant log

Share this post


Link to post
Share on other sites

1 burn bad but then the next 3 fine, all same media. Actually this error is different, on the pop-up it says crc error...but in the log I get totally different.

 

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Thursday, 06 December 2007, 00:57:09

; \\****************************************//

;

;

I 00:30:34 ImgBurn Version 2.3.2.0 started!

I 00:30:34 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 00:30:34 Total Physical Memory: 261,132 KB - Available: 95,488 KB

I 00:30:34 Initialising SPTI...

I 00:30:34 Searching for SCSI / ATAPI devices...

I 00:30:34 Found 1 DVD-ROM, 1 DVD+RW and 1 DVD±RW/RAM!

I 00:30:46 Operation Started!

I 00:30:46 Source File: H:\My ISO Files\HAIRSPRAY.iso

I 00:30:46 Source File Sectors: 2,193,447 (MODE1/2048)

I 00:30:46 Source File Size: 4,492,179,456 bytes

I 00:30:46 Source File Volume Identifier: HAIRSPRAY

I 00:30:46 Source File Application Identifier: DVDFAB

I 00:30:46 Source File Implementation Identifier: FENGTAO SOFTWARE

I 00:30:46 Source File File System(s): ISO9660, UDF (1.02)

I 00:30:46 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.02 (E:) (ATA)

I 00:30:46 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 00:30:46 Destination Media Sectors: 2,295,104

I 00:30:46 Write Mode: DVD

I 00:30:46 Write Type: DAO

I 00:30:46 Write Speed: MAX

I 00:30:46 Link Size: Auto

I 00:30:46 Test Mode: No

I 00:30:46 BURN-Proof: Enabled

I 00:30:47 Filling Buffer... (20 MB)

I 00:30:49 Writing LeadIn...

I 00:31:14 Writing Image... (LBA: 0 - 2193446)

W 00:33:42 Waiting for buffers to recover...

W 00:33:44 Waiting for hard disk activity to reach threshold level...

I 00:33:45 Writing Image...

W 00:34:15 Waiting for buffers to recover...

W 00:34:17 Waiting for hard disk activity to reach threshold level...

I 00:34:18 Writing Image...

I 00:37:09 Synchronising Cache...

I 00:37:32 Closing Track...

I 00:37:35 Finalising Disc...

I 00:37:42 Image MD5: 66a272c6a261dbabc793863f3075f4a0

I 00:37:42 Operation Successfully Completed! - Duration: 00:06:55

I 00:37:42 Average Write Rate: 12,357 KB/s (8.9x) - Maximum Write Rate: 16,987 KB/s (12.3x)

I 00:37:42 Cycling Tray before Verify...

W 00:37:53 Waiting for device to become ready...

I 00:38:10 Device Ready!

I 00:38:10 Operation Started!

I 00:38:10 Source Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.02 (E:) (ATA)

I 00:38:10 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 00:38:10 Image File: H:\My ISO Files\HAIRSPRAY.iso

I 00:38:10 Image File Sectors: 2,193,447 (MODE1/2048)

I 00:38:10 Image File Size: 4,492,179,456 bytes

I 00:38:10 Image File Volume Identifier: HAIRSPRAY

I 00:38:10 Image File Application Identifier: DVDFAB

I 00:38:10 Image File Implementation Identifier: FENGTAO SOFTWARE

I 00:38:10 Image File File System(s): ISO9660, UDF (1.02)

I 00:38:10 Verifying Sectors... (LBA: 0 - 2193446)

I 00:50:56 Device MD5: 66a272c6a261dbabc793863f3075f4a0

I 00:50:56 Device (Padded) MD5: 98297a621d3b049115d8341f9bf1ef77

I 00:50:56 Image MD5: 66a272c6a261dbabc793863f3075f4a0

I 00:50:56 Operation Successfully Completed! - Duration: 00:12:45

I 00:50:56 Average Verify Rate: 5,734 KB/s (4.1x) - Maximum Verify Rate: 8,317 KB/s (6.0x)

I 00:52:32 Operation Started!

I 00:52:32 Source File: H:\My ISO Files\HOSTEL_2.ISO

I 00:52:32 Source File Sectors: 1,957,696 (MODE1/2048)

I 00:52:32 Source File Size: 4,009,361,408 bytes

I 00:52:32 Source File Volume Identifier: HOSTEL_2

I 00:52:32 Source File Application Identifier: ELBY CLONEDVD

I 00:52:32 Source File Implementation Identifier: ELABORATE BYTES

I 00:52:32 Source File File System(s): ISO9660, UDF (1.02)

I 00:52:32 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.02 (E:) (ATA)

I 00:52:32 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 00:52:32 Destination Media Sectors: 2,295,104

I 00:52:32 Write Mode: DVD

I 00:52:33 Write Type: DAO

I 00:52:33 Write Speed: MAX

I 00:52:33 Link Size: Auto

I 00:52:33 Test Mode: No

I 00:52:33 BURN-Proof: Enabled

I 00:52:33 Filling Buffer... (20 MB)

I 00:52:35 Writing LeadIn...

I 00:54:07 Writing Image... (LBA: 0 - 1957695)

W 00:55:26 Failed to Write Sectors 246496 - 246527 - Unknown (Vendor Unique) (0x80, 0x04)

W 00:55:26 Retrying (1 of 20)...

W 00:55:26 Retry Failed - No Seek Complete

W 00:55:26 Retrying (2 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (3 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (4 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (5 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (6 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (7 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (8 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (9 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (10 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (11 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (12 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (13 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (14 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (15 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (16 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (17 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (18 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (19 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (20 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

E 00:56:09 Failed to Write Sectors 246496 - 246527 - Unknown (Vendor Unique) (0x80, 0x04)

I 00:56:09 Synchronising Cache...

I 00:56:10 Closing Track...

I 00:56:12 Finalising Disc...

E 00:56:19 Failed to Write Image!

E 00:56:19 Operation Failed! - Duration: 00:03:46

I 00:56:19 Average Write Rate: 4,074 KB/s (2.9x) - Maximum Write Rate: 11,395 KB/s (8.2x)

I 00:56:27 Close Request Acknowledged

I 00:56:27 Closing Down...

I 00:57:07 Shutting down SPTI...

I 00:57:08 ImgBurn closed!

 

This might even be a error I wasn't even paying attention too :lol:

Share this post


Link to post
Share on other sites
I 00:52:32 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

 

unfortunately ,cmc is regarded by many as one of the worst dye manufacturers , i would expect your crc errors to disappear if you use verbs or yudens

i would slow the burn down to 8x as well from an external hdd when you get those buffer underruns

Share this post


Link to post
Share on other sites

Didn't know that, useful information, like I said, never experienced any problems with them, I have a HP DVD Burner and only supports 4x write and never once had a coaster with this program, that's why I thought it was unusual. I'll buy some normal VB next time, I have Verbatim, Color LightScribe CDR, and Verbatim original color DVD+R and everyone has burned fine....if I can remember if I actually burned them all with IMGB.....so why just the error with imgburn and not blindwrite for instance, does that mean 50-50 chance I have a bad "disc" burn then? Oh, it's nice now that I know your here "cornholio" now I can bug ya all the time :lol:

Edited by Sons_Of_Liberty

Share this post


Link to post
Share on other sites

Just to clarify something: - ImgBurn (or any other burning program for that matter, including Blindwrite), has nothing to do with the quality of your burn. Everything is dependant on the quality of the drive and the quality of your media. All ImgBurn does is send a set of commands to the drive. It's then up to your drive to figure out what to do next. Also, CMC media is garbage. If you have any left, toss them into the bin and save yourself some pain.

Share this post


Link to post
Share on other sites

Thanks to all didn't see the updated firmware. Also, like I said, that media before with my HP DVD burner never once failed. That doesn't seem odd? Anyway, I will switch from here on out, also, I use Memorex (cause it's cheap and no errors), so thanks, and I'll see what happens after updates and switched media.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.