Jump to content

Vista x64 trouble


circlek

Recommended Posts

I am trying to burn a movie image onto Verbatim 16x DVD+R disks. So far I have tried both Nero and ImgBurn. Both fail in a similar manner.

 

The write appears to complete successfully, but the disk is never finalized and the drive continues to spin and the tray is locked. The PC must be rebooted to remove the disk.

 

The disk will play correctly in my PC, but not in a DVD player, I suspect because it was not closed.

 

Here is the ImgBurn log. Any ideas?

 

I 09:56:09 ImgBurn Version 2.3.2.0 started!

I 09:56:09 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000)

I 09:56:09 Total Physical Memory: 4,192,640 KB - Available: 2,762,988 KB

I 09:56:09 Initialising SPTI...

I 09:56:09 Searching for SCSI / ATAPI devices...

I 09:56:09 Found 1 DVD±RW/RAM!

I 09:56:35 Operation Started!

I 09:56:35 Source File: C:\TempTemp\Knocked.Up.UNRATED.PROPER.DVDR-Replica\rep-knockedup\rep-knockedup.iso

I 09:56:35 Source File Sectors: 2,290,255 (MODE1/2048)

I 09:56:35 Source File Size: 4,690,442,240 bytes

I 09:56:35 Source File Volume Identifier: KNOCKED_UP

I 09:56:35 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 09:56:35 Source File Implementation Identifier: mkisofs

I 09:56:35 Source File File System(s): ISO9660, UDF (1.02)

I 09:56:35 Destination Device: [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 09:56:35 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 09:56:35 Destination Media Sectors: 2,295,104

I 09:56:35 Write Mode: DVD

I 09:56:35 Write Type: DAO

I 09:56:35 Write Speed: 8x

I 09:56:35 Link Size: Auto

I 09:56:35 Test Mode: No

I 09:56:35 BURN-Proof: Enabled

I 09:56:35 Filling Buffer... (40 MB)

I 09:56:36 Writing LeadIn...

I 09:57:15 Writing Image... (LBA: 0 - 2290254)

I 10:06:31 Synchronising Cache...

 

 

At this point ImgBurn just waits forever and the drive continues spinning. The PC must be rebooted.

Link to comment
Share on other sites

When you think it's stuck on the sync cache bit, press the F8 key and look in the log window.

 

If you see lines being added to it ever second, the drive (or some rogue driver) is just saying it's still busy doing something - I'm afraid there's nothing I can really do about that.

 

Press F8 again when you're done to turn off I/O Debug mode again.

Link to comment
Share on other sites

  • 2 weeks later...

Here is a copy of the log file that shows the error.

 

I 08:40:54 Operation Started!

I 08:40:54 Source File: C:\TempTemp\Knocked.Up.UNRATED.PROPER.DVDR-Replica\rep-knockedup\rep-knockedup.iso

I 08:40:54 Source File Sectors: 2,290,255 (MODE1/2048)

I 08:40:54 Source File Size: 4,690,442,240 bytes

I 08:40:54 Source File Volume Identifier: KNOCKED_UP

I 08:40:54 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 08:40:54 Source File Implementation Identifier: mkisofs

I 08:40:54 Source File File System(s): ISO9660, UDF (1.02)

I 08:40:54 Destination Device: [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 08:40:54 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 08:40:54 Destination Media Sectors: 2,295,104

I 08:40:54 Write Mode: DVD

I 08:40:54 Write Type: DAO

I 08:40:54 Write Speed: 16x

I 08:40:54 Link Size: Auto

I 08:40:54 Test Mode: No

I 08:40:54 BURN-Proof: Enabled

I 08:40:54 Filling Buffer... (40 MB)

I 08:40:55 Writing LeadIn...

I 08:41:34 Writing Image... (LBA: 0 - 2290254)

I 08:46:21 Synchronising Cache...

W 08:46:27 I/O Interface 'Debug Mode' has been Enabled!

I 08:46:27 [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 08:46:27 CDB: 25 00 00 00 00 00 00 00 00 00

I 08:46:27 CDB Interpretation: Read Capacity

E 08:46:27 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00

E 08:46:27 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 08:46:28 [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 08:46:28 CDB: 25 00 00 00 00 00 00 00 00 00

I 08:46:28 CDB Interpretation: Read Capacity

E 08:46:28 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00

E 08:46:28 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 08:46:29 [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 08:46:29 CDB: 25 00 00 00 00 00 00 00 00 00

I 08:46:29 CDB Interpretation: Read Capacity

E 08:46:29 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00

E 08:46:29 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 08:46:30 [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 08:46:30 CDB: 25 00 00 00 00 00 00 00 00 00

I 08:46:30 CDB Interpretation: Read Capacity

E 08:46:30 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00

E 08:46:30 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 08:46:31 [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 08:46:31 CDB: 25 00 00 00 00 00 00 00 00 00

I 08:46:31 CDB Interpretation: Read Capacity

E 08:46:31 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00

E 08:46:31 SENSE Interpretation: Logical Unit not ready, Long Write in progress

I 08:46:32 [0:2:0] LITE-ON DVDRW LH-20A1L BL05 (E:) (ATAPI)

I 08:46:32 CDB: 25 00 00 00 00 00 00 00 00 00

I 08:46:32 CDB Interpretation: Read Capacity

E 08:46:32 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00

E 08:46:32 SENSE Interpretation: Logical Unit not ready, Long Write in progress

W 08:46:33 I/O Interface 'Debug Mode' has been Disabled!

 

 

Keep in mind that Vista itself can burn DVD's fine on this PC, so I don't think it is hardware related. There are no filter drivers in the driver stack.

 

When you think it's stuck on the sync cache bit, press the F8 key and look in the log window.

 

If you see lines being added to it ever second, the drive (or some rogue driver) is just saying it's still busy doing something - I'm afraid there's nothing I can really do about that.

 

Press F8 again when you're done to turn off I/O Debug mode again.

Link to comment
Share on other sites

LIGHTNING, you sure got a cocky attitude.

 

That's a bit harsh, I wasn't trying to be cocky at all.

 

I just wanted to check it was still that same error code being returned when it really could be considered stuck - and I wouldn't consider it stuck after only 10 seconds - it's quite normal for the drive to return that error code after such a short period of time.

 

Tell you what, why don't I just uninstall your piece of *** software and I'll find one that works.

 

Erm ok, good luck with that.

 

Your system has the problem here, not my piece of *** software.

 

So far I have tried both Nero and ImgBurn. Both fail in a similar manner.
Link to comment
Share on other sites

Tell you what, why don't I just uninstall your piece of *** software and I'll find one that works.

 

with such a bad attitude like the one you displayed, uninstalling ImgBurn is probably about the best thing you can do i reckon.then go and find a 1 click solution for your burning needs. then go and ask them stupid questions.

 

I can see about 3 things in the log file that would cause you problems, but guess what ?? you dont need to know now youve uninstalled Imgburn :rolleyes:

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.