Jump to content

Cannot Burn @ 2.4x


j0hnny_5

Recommended Posts

No matter what dvd media i put in my drive, it will not allow me to burn it at 2.4x. I need it to burn at such so speed to eliminate read errors. When i pop the same media into my girlfriends laptop it allows burning at 2.4x. the lowest it will let me burn is at 4x and it always results in read errors. Any help would be appreciated, ive tried finding another firmware, but no luck.

 

 

 

TSSTcorp CD/DVDW TS-H652D GA01 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Supported Write Speeds: 4x, 6x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 2,086,912

Changeable: Yes

 

Physical Format Information (ADIP):

Disc ID: RITEK-S04-66

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded):

Disc ID: RITEK-S04-66

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

Link to comment
Share on other sites

Newer firmware ? http://drivers.softpedia.com/get/FIRMWARE/...ware-MO02.shtml

 

EDIT:: Hmm, that newer firmware doesn't have any write speeds for that media in the firmware file. You could use MCSE and move the write speeds from another DL media to the S04, but there is no way to say if that would work.

 

Get some decent media like verbs and this sort of thing isn't an issue ;)

Link to comment
Share on other sites

tried firmware upgrade, says incompatible with my drive. My friend says its an OEM drive for gateway, so the toshiba samsung firmwares wont work, and even verbatim disks wont allow me to burn at 2.4 x and also still give me read errors. ill just shell out 50 bucks and get a better dvd+-r drive

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.