Jump to content

Problem...


Bob The Savage

Recommended Posts

I have an external DVD burner, and for a while was using AnyDVD + DVD Shrink + IMG burn very happily. Recently all my DVD's fail to burn. I hoped it was bad disks, so i bought a spool of Verbatim. None of them appear to work. Log is as follows:

 

I 15:25:02 Operation Started!

I 15:25:02 Building Image Tree...

I 15:25:03 Checking Directory Depth...

I 15:25:03 Calculating Totals...

I 15:25:03 Preparing Image...

I 15:25:04 Checking Path Length...

I 15:25:04 Image Size: 4,681,465,856 bytes

I 15:25:04 Image Sectors: 2,285,872

I 15:25:05 Operation Successfully Completed! - Duration: 00:00:02

I 15:25:05 Operation Started!

I 15:25:05 Image Contents: 29 Files, 2 Folders

I 15:25:05 Image Sectors: 2,285,872

I 15:25:05 Image Size: 4,681,465,856 bytes

I 15:25:05 Image Single Layer Profile: DVD-R/RW (Media Capacity: 2,298,496)

I 15:25:05 Image Volume Identifier: KING_ARTHUR

I 15:25:05 Image Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 15:25:05 Image Implementation Identifier: ImgBurn

I 15:25:05 Image File System(s): ISO9660, UDF (1.02)

I 15:25:05 Destination File: F:\KING_ARTHUR.iso

I 15:25:05 Destination Free Space: 5,867,712,512 bytes (5,730,188 KB) (5,595 MB) (5 GB)

I 15:25:05 Destination File System: NTFS

I 15:25:05 File Splitting: Auto

I 15:25:05 Writing Image...

I 15:30:18 Image MD5: 60e1409ad2d1465229bf1862cc92d68b

I 15:30:18 Operation Successfully Completed! - Duration: 00:05:13

I 15:30:18 Average Write Rate: 14,606 KB/s (10.5x) - Maximum Write Rate: 28,539 KB/s (20.6x)

I 15:31:07 Operation Started!

I 15:31:07 Source File: F:\KING_ARTHUR.iso

I 15:31:07 Source File Sectors: 2,285,872 (MODE1/2048)

I 15:31:07 Source File Size: 4,681,465,856 bytes

I 15:31:07 Source File Volume Identifier: KING_ARTHUR

I 15:31:07 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!

I 15:31:07 Source File Implementation Identifier: ImgBurn

I 15:31:07 Source File File System(s): ISO9660, UDF (1.02)

I 15:31:07 Destination Device: [0:0:0] SONY DVD RW DRU-830A SS25 (G:) (USB)

I 15:31:07 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x, 12x, 16x, 18x)

I 15:31:07 Destination Media Sectors: 2,298,496

I 15:31:07 Write Mode: DVD

I 15:31:07 Write Type: DAO

I 15:31:07 Write Speed: 4x

I 15:31:07 Link Size: Auto

I 15:31:07 Test Mode: No

I 15:31:07 BURN-Proof: Enabled

I 15:31:07 Filling Buffer... (40 MB)

I 15:31:09 Writing LeadIn...

W 15:31:23 Failed to Write Sectors 448 - 479 - The semaphore timeout period has expired.

W 15:31:23 Retrying (1 of 20)...

W 15:31:27 Retry Failed - Power On, Reset, or Bus Device Reset Occurred

W 15:31:27 Retrying (2 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (3 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (4 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (5 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (6 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (7 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (8 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (9 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (10 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (11 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (12 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (13 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (14 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (15 of 20)...

W 15:31:27 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:27 Retrying (16 of 20)...

W 15:31:28 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:28 Retrying (17 of 20)...

W 15:31:28 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:28 Retrying (18 of 20)...

W 15:31:28 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:28 Retrying (19 of 20)...

W 15:31:28 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:28 Retrying (20 of 20)...

W 15:31:28 Retry Failed - Logical Unit is in process of becoming ready

W 15:31:33 Retrying (21)...

W 15:31:33 Retry Failed - Logical Unit is in process of becoming ready

E 15:31:33 Failed to Write Sectors 448 - 479 - The semaphore timeout period has expired.

I 15:31:33 Synchronising Cache...

E 15:31:34 Synchronise Cache Failed! - Reason: Logical Unit is in process of becoming ready

I 15:31:34 Synchronising Cache (Last Attempt!)...

E 15:31:34 Synchronise Cache Failed! - Reason: Logical Unit is in process of becoming ready

E 15:31:34 Failed to Write Image!

E 15:31:34 Operation Failed! - Duration: 00:00:26

I 15:31:34 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

 

 

This happens every single time now. Please help? Im using XP 32, (soon to be Vista U. 64)

Link to comment
Share on other sites

W 15:31:23 Failed to Write Sectors 448 - 479 - The semaphore timeout period has expired.

 

Happens with external burners depending on the chipset that is contained in the burner housing. You are on USB 2.0 plugin correct?

Can you mount the drive internally within your machine?

Link to comment
Share on other sites

I would have used the build on the fly option?

 

Destination Free Space: 5,867,712,512 bytes (5,730,188 KB) (5,595 MB) (5 GB)

 

where's the first of the log?

 

ram available etc?

 

usb is an very system intensive operation, not too good if the source files are heavily fragmented and all the available swap file space is taken up by the iso creation

 

just a wild stab in the dark

Link to comment
Share on other sites

I've tried writing really slow speeds, but doesn't seem to help. I build the ISO with IMG burn, and then Burn. got 2gbs of ram, and almost all of it is available for the burn.

 

thanks for info, may not be sophisticated enough to take advantage of all you suggestions.

 

anything easy i could be missing?

Link to comment
Share on other sites

try changing the usb 2 cable.

 

If your using SPTI which is default for ImgBurn and Xp try changing to WNASPI32 in ImgBurn tools/ settings/ I/O

 

Switch back to SPTI if you already switched to WNASPI32 at some point

 

You will need to place wnaspi32 into ImgBurn folder or system32 or both.

 

If you have nero installed search your drive for wnaspi32 if not download it from nero's site.

 

Check ide cable inside enclosure is in fully , see who make the logic chip inside enclosure as it may be programmable therefore you can update it with a newer firmware which might fix the issue.

If you have had this drive a long time and you have never ever seen the Semaphore Timeout Error the drive may have had it or the cables etc.

 

 

Maybe also check to see if there is a firmware update to your writer.

Link to comment
Share on other sites

You have the latest firmware and have tried the slowest speeds possible for your device/media combination so that eliminates one causal part of the problem.

 

Did it just start with this batch of discs?

 

Approx how many discs have you burned with the drive?

 

Did you install any programming between the last successful burn and the first failure?

 

Open IB>tools>driver load order and post a screenshot of the result.

Link to comment
Share on other sites

try to make some more room on the hard drive, run disk cleanup, take out the trash, empty norton's protected recyling bin if used

 

now when you have video file set don't make an iso(that just wastes space)

 

see the guide about building and outputing to dvd burner (building and burning on the fly)

 

you were writting a 4+ gig iso to your hard drive with only 5 gigs free space, the problem is that 5 gigs was probably scattered all to hell in small chunks, then to read that iso the computer had to work it's butt off finding it all while writting to an external usb burner that uses a lot of cpu cycles

 

I hope this makes sense to you

Link to comment
Share on other sites

Its an External Drive... I am Using USB 2.0

 

I did all the nero bizness, but its a USB drive...

 

 

it still uses an ide cable inside enclosure. Did you try replacing the usb cable as well ?

 

when you say you did all the nero bis what do you mean, post a log of it failing with wnaspi32 as the IO

Link to comment
Share on other sites

You have the latest firmware and have tried the slowest speeds possible for your device/media combination so that eliminates one causal part of the problem.

 

Did it just start with this batch of discs?

 

Approx how many discs have you burned with the drive?

 

Did you install any programming between the last successful burn and the first failure?

 

Open IB>tools>driver load order and post a screen shot of the result.

 

Yep, updated firmware/drivers for Burner.

 

No, On the previous Batch of disks i had same issue, but it only started about 1/2 way through spool - this prompted me to snag a new higher quality spool (DVD-R's)

 

Tons of programs I'm afraid. Several Games, and a couple of tools. And due to the failure of the drive to burn, My DVD folder is filling up, round 30gigs in there right now, which is causing major space issues on HD's.

 

Here is info (hopefully what you meant) in the driver load stuff:

 

===============================================

Filter Driver Load Order - ImgBurn v2.3.2.0

===============================================

 

Upper Device Filter: redbook

Upper Class Filter: GEARAspiWDM

Device: CD/DVD-ROM Device

Lower Class Filter: AnyDVD

Lower Device Filter: [None Found]

 

Filter Name: redbook

File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys

File Version: 5.1.2600.3264 (xpsp.071130-1425)

File Description: Redbook Audio Filter Driver

Product Name: Microsoft® Windows® Operating System

Product Version: 5.1.2600.3264

Company Name: Microsoft Corporation

Copyright: © Microsoft Corporation. All rights reserved.

 

Filter Name: GEARAspiWDM

File Name: C:\WINDOWS\System32\Drivers\GEARAspiWDM.sys

File Version: 2.0.6.1

File Description: CD/DVD Class Filter Driver

Product Name: GEAR.wrks

Product Version: 8.xx [2.0.6.1]

Company Name: GEAR Software Inc.

Copyright: Copyright © GEAR Software Inc. 2006

 

Filter Name: AnyDVD

File Name: C:\WINDOWS\System32\Drivers\AnyDVD.sys

File Version: 6.1.9.3

File Description: AnyDVD Filter Driver

Product Name: AnyDVD

Product Version: 6.1.9.3

Company Name: SlySoft, Inc.

Copyright: Copyright 2002 - 2007 SlySoft, Inc.

 

 

 

 

 

 

 

Chewy: Thanks, I believe i do understand what your telling me. I'll look for the guide you mentioned, and report back

 

dontasciime: Thanks, but im not really ready to void the warranty on this puppy yet. And by Nero Buisness i meant: I found the wnaspi32 dll, and put it both in the IB folder, and system32 folder. However when i tried to which to the Wnaspi32 option on the I/O tab; IB can no longer find any drives. I can't post log of it filing cause i can't begin.

 

I will also try replacing the USB cable.

Link to comment
Share on other sites

  • 4 weeks later...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.