Jump to content

Burning DL DVD, BookType Change


mk124red

Recommended Posts

Hi,

I am trying to burn a wedding video onto a dual layer DVD+R, it plays fine in new machines but will not in older players. I beleive this is down to the booktype/bitsetting that needs to be changed to DVD-ROM.

 

I have a Samsung NP-Q35 with a TSSTcorp CD/DVDW TS-L632D burner. I created a VIDEO_TS file in my burn software (DVD Architect) and then using IMG DVD to burn the disk. Once I have "Built" it and chosen a layer break I go to write mode and choose change booktype.

 

I go to Samsung and choose Drive (For DVD+R DL Media), the current setting shows "Unknown (Drive dosen't report it!)". I choose a new setting of DVD-ROM and click change. Sucsess is displayed.

I then click OK and start the burn.

 

Everything goes fine but I still have the same problem with playing in older dvd players. I am convinced it is a booktype issue and my drive will not change it, either that or I'm doing something wrong.

 

I have put the log below, any help would be great, and if it is my burner could anyone reccomend a burner that will allow booktype changing within IMGBurn.

 

Thanks

 

 

I 14:51:37 ImgBurn Version 2.3.2.0 started!

I 14:51:37 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 14:51:37 Total Physical Memory: 1,562,700 KB - Available: 976,528 KB

I 14:51:37 Initialising SPTI...

I 14:51:37 Searching for SCSI / ATAPI devices...

I 14:51:37 Found 1 DVD±RW/RAM!

I 14:52:09 Operation Started!

I 14:52:09 Building Image Tree...

I 14:52:09 Checking Directory Depth...

I 14:52:09 Calculating Totals...

I 14:52:09 Preparing Image...

I 14:53:08 Using Layer Break LBA: 1593711 -> 1593712 (VTS_02, PGC: 1, Chapter: 3, Cell: 3, Vob/Cell ID: 1/3, Time: 01:06:54, SPLIP: Yes)

I 14:53:08 Checking Path Length...

I 14:53:08 Image Size: 5,380,833,280 bytes

I 14:53:08 Image Sectors: 2,627,360

I 14:53:08 Operation Successfully Completed! - Duration: 00:00:58

 

This is another one

 

TSSTcorp CD/DVDW TS-L632D SC03 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Complete

Erasable: No

Sessions: 1

Sectors: 2,627,360

Size: 5,380,833,280 bytes

Time: 583:53:35 (MM:SS:FF)

Supported Write Speeds: 2.4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 1,355,184

Changeable: No

 

TOC Information:

Session 1...

-> Track 01 (Mode 1, LBA: 0 - 2627359)

-> LeadOut (LBA: 2627360)

 

Physical Format Information (ADIP):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Link to comment
Share on other sites

It's automatic for samsung drives (assuming they support it full stop).

 

Your one appears to support it.

 

Physical Format Information (Last Recorded):

Disc ID: MKM-001-00

Book Type: DVD-ROM

...

 

Well do you have any ideas on why it fails to play. And do I build with the output on device or image file?

Link to comment
Share on other sites

Do you verify your burns?

 

Maybe your old players just don't like burnt DL discs at all? Have you ever had/used any that work?

 

It doesn't matter if you go via an image file or burn directly to the drive. Going to the drive directly is obviously just a bit quicker and saves the intermediate step.

Link to comment
Share on other sites

Do you verify your burns?

 

Maybe your old players just don't like burnt DL discs at all? Have you ever had/used any that work?

 

It doesn't matter if you go via an image file or burn directly to the drive. Going to the drive directly is obviously just a bit quicker and saves the intermediate step.

 

I do verify my burns and is ok. I have used the player to play dual layer dvd purchased in shops before.

 

If you are sure my burner will work would it be possible to give me exact instructions as to how to burn in DVD-ROM. I am just about to try again.

 

Many thanks for your quick responses.

Link to comment
Share on other sites

As long as you have not unticked one of the settings ImgBurn will Auto book type +R to DVD-ROM on your drive and from the info you have posted it is being set to DVD-ROM so this not your problem.

 

Does that older dvd player still play anything.

 

You tried another backup in it

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.