ken1978 Posted January 28, 2008 Share Posted January 28, 2008 I wasted about 6 DoubleLayers on burning a game for my xbox 360 console never having problems before but now i'm getting always the same error i've tried using different brands like Philips,Memorex,Ritec but nothing helps?? Somoene knows this kind of error and knows who to fix this?? I/O error! Device [1:0:0] Optiarc DVD RW AD-7173A1-03 (D:) (ATA) ScsiStatus 0x02 Interpretation: Check Condition CDB: 2A 00 001D356000002000 Interpretation Write (10) - Sectors: 1914308 - 1914239 Sense Area: 700003000000000A00000000730300000000000000000000 Interpretation Power Calibration Area Error I 17:43:12 ImgBurn Version 2.3.2.0 started! I 17:43:12 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 17:43:12 Total Physical Memory: 2.095.616 KB - Available: 1.239.468 KB I 17:43:12 Initialising SPTI... I 17:43:12 Searching for SCSI / ATAPI devices... I 17:43:12 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 17:43:57 Operation Started! I 17:43:57 Source File: C:\films & series\Lost_Odyssey_ASIA_XBOX360-UCC\2DVD\ucc-lostodk2.dvd I 17:43:57 Source File Sectors: 3.825.924 (MODE1/2048) I 17:43:57 Source File Size: 7.835.492.352 bytes I 17:43:57 Source File Volume Identifier: XGD2DVD_NTSC I 17:43:57 Source File Implementation Identifier: Sonic Scenarist 3.1 I 17:43:57 Source File File System(s): ISO9660; UDF (1.02) I 17:43:57 Destination Device: [1:0:0] Optiarc DVD RW AD-7173A 1-03 (D:) (ATA) I 17:43:57 Destination Media Type: DVD+R DL (Disc ID: RITEK-D03-01) (Speeds: 4x; 6x; 8x) I 17:43:57 Destination Media Sectors: 4.173.824 I 17:43:57 Write Mode: DVD I 17:43:57 Write Type: DAO I 17:43:57 Write Speed: 2,4x I 17:43:57 Link Size: Auto I 17:43:57 Test Mode: No I 17:43:57 BURN-Proof: Enabled I 17:43:57 User Specified L0 Data Zone Capacity: 1.913.760 I 17:44:26 Filling Buffer... (40 MB) I 17:44:26 Writing LeadIn... I 17:44:27 Writing Image... (LBA: 0 - 3825923) I 17:44:27 Writing Layer 0... (LBA: 0 - 1913759) I 17:55:58 Writing Layer 1... (LBA: 1913760 - 3825923) W 17:56:36 Failed to Write Sectors 1914208 - 1914239 - Power Calibration Area Error W 17:56:36 Retrying (1 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (2 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (3 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (4 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (5 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (6 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (7 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (8 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (9 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (10 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (11 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (12 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (13 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (14 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (15 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (16 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (17 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (18 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (19 of 20)... W 17:56:36 Retry Failed - Write Error W 17:56:36 Retrying (20 of 20)... W 17:56:36 Retry Failed - Write Error I 18:25:28 Abort Request Acknowledged Link to comment Share on other sites More sharing options...
Dialysis1 Posted January 28, 2008 Share Posted January 28, 2008 Doing a search showed 25 posts for XGD2DVD. Perhaps one of those can help. Link to comment Share on other sites More sharing options...
spinningwheel Posted January 28, 2008 Share Posted January 28, 2008 I 17:43:57 Destination Media Type: DVD+R DL (Disc ID: RITEK-D03-01) (Speeds: 4x; 6x; 8x) First of all, get rid of these and try some Verbatim DataLifePlus or Taiyo Yuden discs, yours are junk. Link to comment Share on other sites More sharing options...
ken1978 Posted January 28, 2008 Author Share Posted January 28, 2008 Thx for the response! Everybody says that the DVD'S are crap but i burnt a lot of games about 70 and always with MemorexDL+ and never had problems not one!! Only since yesterday i spend a lot of DVD'S on this game but i only getting errors and the game is good several people confirmed that the game works.. Must i update my firmware for my "Optiarc DVD RW AD-7173A1" or use another verion of IMGBURN cause i don't think my problem is gonna solve when using Verbatims DVD'S?? Link to comment Share on other sites More sharing options...
spinningwheel Posted January 28, 2008 Share Posted January 28, 2008 Do what you're going to do. The media is crap and is the first place to start. I don't make this stuff up, I just try to point users in the right direction. I couldn't find a newer firmware at rpc-1, if there is one somewhere else and you trust it, try it also. There is no other version of IB available right now, and if you revert to an older one...we don't support it. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 28, 2008 Share Posted January 28, 2008 Saying you've always used Memorex media doesn't mean anything, it's the dye that's important. Maybe your other discs used a different dye. The current ones seem to be using RITEK-D03-01. You should also try burning at all the different speeds supported by the drive (in your case and with those discs - 4x, 6x, 8x). Some work better than others. Post your filter drivers list if you get a minute, it's in the Tools menu. (just press the clipboard button and then paste into your reply) Link to comment Share on other sites More sharing options...
ken1978 Posted January 28, 2008 Author Share Posted January 28, 2008 Heey thx for the replies guys About the dye stuff the last 2 DVD'S i used are from Philips and they use Ritek right? I'm now burning another one on 6x speed the last 2 ones i burnt on 2,4 speed cause everyone always says that's the best speed you can burn on but i see that speed is not supported for the Philips dvds i use so now i try 6x When i'm ready i post my log where you asked for! stay tuned Link to comment Share on other sites More sharing options...
ken1978 Posted January 28, 2008 Author Share Posted January 28, 2008 My filterdrive list is empty?? =============================================== Filter Driver Load Order - ImgBurn v2.3.2.0 =============================================== Upper Device Filter: [None Found] Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: [None Found] Lower Device Filter: [None Found] Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 28, 2008 Share Posted January 28, 2008 Fair enough, can't do much fine tuning with that! Link to comment Share on other sites More sharing options...
ken1978 Posted January 28, 2008 Author Share Posted January 28, 2008 I did everything you said but he does not copied the information in the clipboard Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 28, 2008 Share Posted January 28, 2008 Don't worry, what you did was correct, you just have a very clean list! Link to comment Share on other sites More sharing options...
Recommended Posts