Jump to content

Another writing problem... XD


clleavage

Recommended Posts

Once again ive got yet another writing problem... please check it out and respond ASAP:

 

I 17:02:27 ImgBurn Version 2.3.2.0 started!

I 17:02:27 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 17:02:27 Total Physical Memory: 1,039,660 KB - Available: 358,396 KB

W 17:02:27 Drive D:\ (FAT32) does not support single files > 4 GB in size.

I 17:02:27 Initialising SPTI...

I 17:02:27 Searching for SCSI / ATAPI devices...

I 17:02:27 Found 1 DVD-ROM and 1 DVD±RW!

I 17:12:48 Operation Started!

I 17:12:48 Source File: C:\Documents and Settings\HP_Owner\Desktop\Ace Combat\strange-ac6.dvd

I 17:12:48 Source File Sectors: 3,825,924 (MODE1/2048)

I 17:12:48 Source File Size: 7,835,492,352 bytes

I 17:12:48 Source File Volume Identifier: XGD2DVD_NTSC

I 17:12:48 Source File Implementation Identifier: Sonic Scenarist 3.1

I 17:12:49 Source File File System(s): ISO9660, UDF (1.02)

I 17:12:49 Destination Device: [0:0:0] HP DVD Writer 640c CS30 (E:) (ATA)

I 17:12:49 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

I 17:12:49 Destination Media Sectors: 4,173,824

I 17:12:49 Write Mode: DVD

I 17:12:49 Write Type: DAO

I 17:12:49 Write Speed: MAX

I 17:12:49 Link Size: Auto

I 17:12:49 Test Mode: No

I 17:12:49 BURN-Proof: Enabled

I 17:12:49 Optimal L0 Data Zone Capacity: 1,913,760

I 17:12:49 Optimal L0 Data Zone Method: Copied From Original Disc

I 17:12:50 Filling Buffer... (40 MB)

I 17:12:52 Writing LeadIn...

I 17:13:03 Writing Image... (LBA: 0 - 3825923)

I 17:13:03 Writing Layer 0... (LBA: 0 - 1913759)

I 17:33:17 Writing Layer 1... (LBA: 1913760 - 3825923)

W 17:33:39 Failed to Write Sectors 1914080 - 1914111 - Write Error

W 17:33:39 Retrying (1 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (2 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (3 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (4 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (5 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (6 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (7 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (8 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (9 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (10 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (11 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (12 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (13 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (14 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (15 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (16 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (17 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (18 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (19 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 17:33:39 Retrying (20 of 20)...

W 17:33:39 Retry Failed - Invalid Address For Write

W 18:13:22 Retrying (21)...

W 18:13:22 Retry Failed - Invalid Address For Write

W 18:13:23 Retrying (22)...

W 18:13:23 Retry Failed - Invalid Address For Write

E 18:13:24 Failed to Write Sectors 1914080 - 1914111 - Write Error

I 18:13:24 Synchronising Cache...

I 18:13:25 Closing Track...

I 18:13:35 Finalising Disc...

Link to comment
Share on other sites

I 17:12:49 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

Change your media. Ritek DL media is pretty ordinary. Only use Verbatims MKM-001, Made in Singapore.

 

You could also do with a firmware update - http://forum.rpc1.org/dl_firmware.php?download_id=2034

 

Regards

Link to comment
Share on other sites

Nope - they are poor media. You can see this burn crapped out right after the layer break. This is typical.

 

Save tearing your hair out - go get some Verbs, MIS, 2.4x.

 

Regards

Link to comment
Share on other sites

(looking at the OP's nickname I just had to butt in... I mean... you get the idea! ;))

 

Changing the ISO image, by itself, doesn't make any difference, since the burner will burn whatever data is sent to it.

 

Leave Verify enabled to confirm it was burnt properly :thumbup:

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.