Jump to content
Sign in to follow this  
sneik

Failed to set L0 data zone capacity

Recommended Posts

Look... i instaled the ImgBurn, but every time that i try burn a dvd dl this message of error apears:

Failed to set L0 data zone capacity

Reason: invalid Field in paremeter list

my dvd recoder is a lg 4163b with firmware 1.06....... so firmware cant be the problem.

i also tried burn this same image in another computer, and works.

so i dont know if can be a setting or maybe a problem with my recoder.

Anyone can help me?

 

P.s: sorry for the inglish.... i really don´t speak Inglish in my country... but i try haha :whistling:

Share this post


Link to post
Share on other sites

Ok

 

I 19:55:54 ImgBurn Version 2.4.0.0 started!

I 19:55:54 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 19:55:54 Total Physical Memory: 1.048.048 KB - Available: 592.644 KB

W 19:55:54 Drive I:\ (FAT32) does not support single files > 4 GB in size.

I 19:55:54 Initialising SPTI...

I 19:55:54 Searching for SCSI / ATAPI devices...

I 19:55:54 Found 2 DVD-ROMs and 1 DVD±RW/RAM!

I 19:56:08 Operation Started!

I 19:56:08 Source File: D:\BlackSite_Area_51\ptc-bs51.dvd

I 19:56:08 Source File Sectors: 3.825.924 (MODE1/2048)

I 19:56:08 Source File Size: 7.835.492.352 bytes

I 19:56:08 Source File Volume Identifier: XGD2DVD_NTSC

I 19:56:08 Source File Volume Set Identifier: 34672923

I 19:56:09 Source File Implementation Identifier: Sonic Scenarist 3.1

I 19:56:09 Source File File System(s): ISO9660; UDF (1.02)

I 19:56:09 Destination Device: [1:2:0] HL-DT-ST DVDRAM GSA-4163B A106 (E:) (ATA)

I 19:56:09 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x)

I 19:56:09 Destination Media Sectors: 4.173.824

I 19:56:09 Write Mode: DVD

I 19:56:09 Write Type: DAO

I 19:56:09 Write Speed: 2,4x

I 19:56:09 Link Size: Auto

I 19:56:09 Test Mode: No

I 19:56:09 OPC: Yes

I 19:56:09 BURN-Proof: Enabled

I 19:56:09 Book Type Setting: DVD-ROM

I 19:56:09 Optimal L0 Data Zone Capacity: 1.913.760

I 19:56:09 Optimal L0 Data Zone Method: Copied From Original Disc

E 19:56:18 Failed to set L0 Data Zone Capacity!

E 19:56:18 Reason: Write Error

E 19:56:18 Operation Failed! - Duration: 00:00:09

I 19:56:18 Average Write Rate: N/A - Maximum Write Rate: N/A

Share this post


Link to post
Share on other sites

Ok so the drive is failing to write to the media.

 

That's generally why every DL related post you'll see on this forum tells the poster to use Verbatim 2.4x DVD+R DL discs. They work where others fail.

Share this post


Link to post
Share on other sites
Ok so the drive is failing to write to the media.

 

That's generally why every DL related post you'll see on this forum tells the poster to use Verbatim 2.4x DVD+R DL discs. They work where others fail.

 

 

 

theres no other way to resolve that?

maybe a future firmware update or somenthing like that?

Share this post


Link to post
Share on other sites

Change to Verbs and I think you'll be happy.

 

Regards

Share this post


Link to post
Share on other sites

ok thanks... for help... at least a can use the dvds that i buy in recorder of my syster... works in her lg

Share this post


Link to post
Share on other sites

Hi all,

 

I have the same problem. I run Widnows XP in the Parallels Desktop. I am using the Verbatim DVD+R DL (made in India). My drive is HL-DT-ST DVDRW GWA4080MA AE39 (macbook pro). I do not know what to do, these verbatims weren't so cheap ;-) Please, someone help, i bough bunch of them ;p

Share this post


Link to post
Share on other sites

I have been experimenting for a while, and i decided to change the book type. I read somewhere that my drive is the LG drive, but everytime i choose the LG drive i get message in the same window: Invalid field in CDB. If i decide to write with this error i get message that burn is failed because of the invalid field in parameter list

Share this post


Link to post
Share on other sites

Thank you for your reply. You are right, i tried imgburn and nero to change the bitsetting, but with no success ;/

 

i am a little bit afriad to change something in firmware, from what i ve read , many people regret it :/

Edited by vitek

Share this post


Link to post
Share on other sites

I've never regretted using modified firmware...but I'm a PC user, not a Mac user and don't know if there is a difference in write strategies or a benefit for that matter.

Share this post


Link to post
Share on other sites

I tried also other programs on mac, i followed the instructions, and nothing worked...i am starting to believe that the drive is responsible for all the problems i am having...

Share this post


Link to post
Share on other sites
I tried also other programs on mac, i followed the instructions, and nothing worked...i am starting to believe that the drive is responsible for all the problems i am having...

 

That would be my guess. Try a nice external drive...Lite-On perhaps.

Share this post


Link to post
Share on other sites

Hello,

 

I'm having a Acer 5920 laptop. Always used Verbatim+r DL. Without any problems.

 

I had some issues with my wireless so I set back te Acer image (And did sevrall times the windows update). Installed again IMGBURN.

When I tried to burn a image the laptop froze. So I did a hard reset.

 

After this action I get every time this faillure.

 

I 12:41:42 ImgBurn Version 2.4.2.0 started!

I 12:41:42 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)

I 12:41:42 Total Physical Memory: 3.143.164 KB - Available: 1.999.400 KB

I 12:41:42 Initialising SPTI...

I 12:41:42 Searching for SCSI / ATAPI devices...

I 12:41:42 Found 1 DVD

Share this post


Link to post
Share on other sites

You're using discs that have already failed. Use a new one and it'll either work or you'll get a different message.

 

You did the right thing in ignoring the LB error - it was moaning because it's already been set (and you can't set it twice)

Share this post


Link to post
Share on other sites

I havent been able to find these Verbatim discs, but i have tried 5 different DL brands and keep getting this 'LO data zone capacity' error message.

 

I was wondering whether it could be my burner that needs replacing? I have been told that the Pioneer drive is best for backing up 360 games. Currently, i am using a LiteOn drive

 

Any help will be greatly appreciated

 

Thanks :thumbup:

Edited by nodster

Share this post


Link to post
Share on other sites

Hi and welcome to the forum, nodster! :)

 

What model of Lite-On do you have now? Latest firmware installed? You could post a burning log from one of those failed burns. But it might very well be as you say, that error message is common when the burner doesn't support the media.

Share this post


Link to post
Share on other sites
Hi and welcome to the forum, nodster! :)

 

What model of Lite-On do you have now? Latest firmware installed? You could post a burning log from one of those failed burns. But it might very well be as you say, that error message is common when the burner doesn't support the media.

 

Hey Thanks!

 

It is a Lite-On DVD RW SHW160P65.. and i dont think i have the latest firware? i have the new IMGburn? :unsure:

Share this post


Link to post
Share on other sites

Post a log where your burner is mentioned and we can check it for you.

 

:)

Share this post


Link to post
Share on other sites
Post a log where your burner is mentioned and we can check it for you.

 

:)

 

 

I 09:10:00 ImgBurn Version 2.4.2.0 started!

I 09:10:00 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 09:10:00 Total Physical Memory: 982,512 KB - Available: 416,000 KB

W 09:10:00 Drive F:\ (FAT32) does not support single files > 4 GB in size.

I 09:10:00 Initialising SPTI...

I 09:10:00 Searching for SCSI / ATAPI devices...

I 09:10:00 Found 1 DVD-ROM and 1 DVD

Share this post


Link to post
Share on other sites
I 09:11:10 Destination Device: [3:1:0] LITE-ON DVDRW SHW-160P6S PS08 (D:) (ATA)

The latest version is here:

 

http://www.firmwarehq.com/Lite-On/SHW-160P6S/files.html

 

:)

 

I have updated the firmware, thankyou Cynthia.

 

However, now i am getting a different reason for the error

 

"Invalid field in CDB" :blush:

 

I have read a previous comment by Lightning that i could update with some other firmware? Should i try this?

 

Cheers

Edited by nodster

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.