Jump to content

Optimum Power Calibration Failed!


Arky2

Recommended Posts

Did you try rebooting after turning it off? (actually cycle the power too so the drive resets properly)

 

All I can see in that mess of logs is it saying command sequence error - but that's probably caused by the failed burns before it.

 

Hi there!Tried different settings with reboots/cycling and still nothing works when trying to burn with this program.I was doing fine before but with this update I'm getting OPC error and if I change the settings,I get I/O error.Here is my latest log which I hope is not all messy.Thanks for your help!

 

 

ImgBurn Version 2.4.0.0 - Log

; Saturday, 08 March 2008, 14:21:39

; \\****************************************//

;

;

I 14:16:21 ImgBurn Version 2.4.0.0 started!

I 14:16:21 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3, v.3300)

I 14:16:21 Total Physical Memory: 2,096,364 KB - Available: 1,478,296 KB

I 14:16:22 Initialising SPTI...

I 14:16:22 Searching for SCSI / ATAPI devices...

I 14:16:22 Found 1 CD-RW and 1 DVD±RW!

I 14:16:24 Operation Started!

I 14:16:24 Source File: C:\@Agent Downloads\Nero 8 Ultra Edition\Nero 8 Ultra Edition.iso

I 14:16:24 Source File Sectors: 503,765 (MODE1/2048)

I 14:16:24 Source File Size: 1,031,710,720 bytes

I 14:16:24 Source File Volume Identifier: Nero 8 Ultra Edi

I 14:16:24 Source File Application Identifier: PowerISO

I 14:16:24 Source File File System(s): ISO9660, Joliet

I 14:16:24 Destination Device: [2:0:0] PLEXTOR DVDR PX-716A 1.11 (E:) (SCSI)

I 14:16:24 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 14:16:24 Destination Media Sectors: 2,297,888

I 14:16:24 Write Mode: DVD

I 14:16:24 Write Type: DAO

I 14:16:24 Write Speed: MAX

I 14:16:24 Link Size: Auto

I 14:16:24 Test Mode: No

I 14:16:24 OPC: Yes

I 14:16:24 BURN-Proof: Enabled

I 14:16:24 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes

I 14:16:24 Filling Buffer... (40 MB)

I 14:16:25 Writing LeadIn...

W 14:16:49 Failed to Write Sectors 32 - 63 - Power Calibration Area Error

W 14:16:49 Retrying (1 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (2 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (3 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (4 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (5 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (6 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (7 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (8 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (9 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (10 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (11 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (12 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (13 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (14 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (15 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (16 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (17 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (18 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (19 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

W 14:16:49 Retrying (20 of 20)...

W 14:16:49 Retry Failed - Invalid Address For Write

E 14:16:57 Failed to Write Sectors 32 - 63 - Power Calibration Area Error

E 14:16:57 Next Writable Address: 0

I 14:16:57 Synchronising Cache...

E 14:17:02 Failed to Write Image!

E 14:17:02 Operation Failed! - Duration: 00:00:38

I 14:17:02 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

I 14:21:38 Close Request Acknowledged

I 14:21:38 Closing Down...

I 14:21:39 Shutting down SPTI...

I 14:21:39 ImgBurn closed!

;

;

; //****************************************\\

; ImgBurn Version 2.4.0.0 - Log

; Saturday, 08 March 2008, 14:11:59

; \\****************************************//

;

;

I 14:11:37 ImgBurn Version 2.4.0.0 started!

I 14:11:37 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3, v.3300)

I 14:11:37 Total Physical Memory: 2,096,364 KB - Available: 1,481,056 KB

I 14:11:38 Initialising SPTI...

I 14:11:38 Searching for SCSI / ATAPI devices...

I 14:11:38 Found 1 CD-RW and 1 DVD±RW!

I 14:11:40 Operation Started!

I 14:11:40 Source File: C:\@Agent Downloads\Nero 8 Ultra Edition\Nero 8 Ultra Edition.iso

I 14:11:40 Source File Sectors: 503,765 (MODE1/2048)

I 14:11:40 Source File Size: 1,031,710,720 bytes

I 14:11:40 Source File Volume Identifier: Nero 8 Ultra Edi

I 14:11:40 Source File Application Identifier: PowerISO

I 14:11:40 Source File File System(s): ISO9660, Joliet

I 14:11:40 Destination Device: [2:0:0] PLEXTOR DVDR PX-716A 1.11 (E:) (SCSI)

I 14:11:40 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 14:11:40 Destination Media Sectors: 503,776

I 14:11:40 Write Mode: DVD

I 14:11:40 Write Type: DAO

I 14:11:40 Write Speed: MAX

I 14:11:40 Link Size: Auto

I 14:11:40 Test Mode: No

I 14:11:40 OPC: Yes

I 14:11:40 BURN-Proof: Enabled

I 14:11:40 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes

E 14:11:54 Failed to Reserve Track! - Command Sequence Error

E 14:11:57 Operation Failed! - Duration: 00:00:16

I 14:11:57 Average Write Rate: N/A - Maximum Write Rate: N/A

I 14:11:59 Close Request Acknowledged

I 14:11:59 Closing Down...

I 14:11:59 Shutting down SPTI...

I 14:11:59 ImgBurn closed!

;

;

; //****************************************\\

; ImgBurn Version 2.4.0.0 - Log

; Saturday, 08 March 2008, 14:11:28

; \\****************************************//

;

;

I 14:10:23 ImgBurn Version 2.4.0.0 started!

I 14:10:23 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3, v.3300)

I 14:10:23 Total Physical Memory: 2,096,364 KB - Available: 1,495,604 KB

I 14:10:24 Initialising SPTI...

I 14:10:24 Searching for SCSI / ATAPI devices...

I 14:10:24 Found 1 CD-RW and 1 DVD±RW!

I 14:10:27 Operation Started!

I 14:10:27 Source File: C:\@Agent Downloads\Nero 8 Ultra Edition\Nero 8 Ultra Edition.iso

I 14:10:27 Source File Sectors: 503,765 (MODE1/2048)

I 14:10:27 Source File Size: 1,031,710,720 bytes

I 14:10:27 Source File Volume Identifier: Nero 8 Ultra Edi

I 14:10:27 Source File Application Identifier: PowerISO

I 14:10:27 Source File File System(s): ISO9660, Joliet

I 14:10:27 Destination Device: [2:0:0] PLEXTOR DVDR PX-716A 1.11 (E:) (SCSI)

I 14:10:27 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 14:10:27 Destination Media Sectors: 2,297,888

I 14:10:27 Write Mode: DVD

I 14:10:27 Write Type: DAO

I 14:10:27 Write Speed: MAX

I 14:10:27 Link Size: Auto

I 14:10:27 Test Mode: No

I 14:10:27 OPC: No

I 14:10:27 BURN-Proof: Enabled

I 14:10:27 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes

I 14:10:27 Filling Buffer... (40 MB)

I 14:10:28 Writing LeadIn...

W 14:10:43 Failed to Write Sectors 32 - 63 - Power Calibration Area Error

W 14:10:43 Retrying (1 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (2 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (3 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (4 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (5 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (6 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (7 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (8 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (9 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (10 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (11 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (12 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (13 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (14 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (15 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (16 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (17 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (18 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (19 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

W 14:10:43 Retrying (20 of 20)...

W 14:10:43 Retry Failed - Invalid Address For Write

E 14:10:56 Failed to Write Sectors 32 - 63 - Power Calibration Area Error

E 14:10:56 Next Writable Address: 0

I 14:10:56 Synchronising Cache...

W 14:11:01 User opted to skip the 'Close Track/Session/Disc' functions.

E 14:11:01 Failed to Write Image!

E 14:11:01 Operation Failed! - Duration: 00:00:33

I 14:11:01 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

I 14:11:28 Close Request Acknowledged

I 14:11:28 Closing Down...

I 14:11:28 Shutting down SPTI...

I 14:11:28 ImgBurn closed!

;

Link to comment
Share on other sites

I 14:10:27 Test Mode: No

I 14:10:27 OPC: No

I 14:10:27 BURN-Proof: Enabled

I 14:10:27 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes

I 14:10:27 Filling Buffer... (40 MB)

I 14:10:28 Writing LeadIn...

W 14:10:43 Failed to Write Sectors 32 - 63 - Power Calibration Area Error

W 14:10:43 Retrying (1 of 20)...

 

Ah finally we get a decent log where the OPC command isn't sent and you don't get a 'command sequence error' error from the drive.

 

It doesn't matter which way you look at it, your drive has issues.

 

I tested a few TYG03's in my 716 yesterday and they all burnt fine (with 'Perform OPC' enabled and disabled) - might I add that this is my 2nd 716, the first broke and wouldn't burn anything. It looks like yours might have gone south too.

Link to comment
Share on other sites

I 14:10:27 Test Mode: No

I 14:10:27 OPC: No

I 14:10:27 BURN-Proof: Enabled

I 14:10:27 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes

I 14:10:27 Filling Buffer... (40 MB)

I 14:10:28 Writing LeadIn...

W 14:10:43 Failed to Write Sectors 32 - 63 - Power Calibration Area Error

W 14:10:43 Retrying (1 of 20)...

 

Ah finally we get a decent log where the OPC command isn't sent and you don't get a 'command sequence error' error from the drive.

 

It doesn't matter which way you look at it, your drive has issues.

 

I tested a few TYG03's in my 716 yesterday and they all burnt fine (with 'Perform OPC' enabled and disabled) - might I add that this is my 2nd 716, the first broke and wouldn't burn anything. It looks like yours might have gone south too.

 

As much as I appreciate your work and your reply,I have to say I think you are wrong regarding this drive.So you know,I have no problem burning using the same drive and an external that won't work with IMGBurn either using half a dozen other burning programs.I also had no problems using IMG up to this latest update for some reasons.If my drive was the issue,why is it that I can use Nero,Alcohol 120%,Fireburner... without any errors?

Link to comment
Share on other sites

Have you really tried burning with other programs since you started getting this error?

 

It's not the software that makes them up, the drive itself errors out and ImgBurn simply relays the error message to you.

 

I cannot force your drive to NOT error out, it's impossible.

 

Seriously, if the other programs will still burn that exact same media then I'm at a loss. All it could be is the Incremental / DAO 'Write Type' option in the settings - but that shouldn't be a make or break choice, they should both work.

Link to comment
Share on other sites

From my point of view, it's 1 command that gets/doesn't get (depending on the value of the 'Perform OPC Before Write' option in the settings) sent to the drive, that's it. The drive deals with it in the way it see's fit.

 

As Google would probably tell you, OPC is where the drive uses a special area on the disc to try and figure out the optimum power level/setting for the laser when burning onto the media.

 

When it's off, the burn sequence is identical to 2.3.2.0 and all the other versions before it.

 

If you'd like to see what the command is, read the MMC6 manual available (free) from www.t10.org and look at the 'SEND OPC INFORMATION' command.

Link to comment
Share on other sites

  • 2 months later...

this is my problem:

 

I 15:09:26 ImgBurn Version 2.4.1.0 started!

I 15:09:26 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 15:09:26 Total Physical Memory: 523.760 KB - Available: 147.344 KB

I 15:09:26 Initialising SPTI...

I 15:09:26 Searching for SCSI / ATAPI devices...

I 15:09:26 Found 1 DVD-ROM and 1 DVD

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.