Jump to content

Optimum Power Calibration Failed, Reason: Write Protected


TURGUT

Recommended Posts

When I try to burn an .img file to DVD+RW with ImgBurn 2.4.0.0 i get error "Optimum Power Calibration Failed, Reason: Write Protected"?

 

Running ImgBurn in Windows XP Professional SP2 using a Plextor PX-708A DVD-Recorder.

Link to comment
Share on other sites

Thanx Cynthia! :)

 

I would also like to mention I'm running Firmware V1.12 on my Plextor PX-708A DVD-Recorder and the DVD+RW media I'm using is TDK branded 4x DVD+RW [RICOHJPN-W11-01].

 

Here is two logs with the error:

 

; //****************************************\\

; ImgBurn Version 2.4.0.0 - Log

; onsdag, 05 mars 2008, 21:46:01

; \\****************************************//

;

;

I 21:37:43 ImgBurn Version 2.4.0.0 started!

I 21:37:43 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 21:37:43 Total Physical Memory: 2 095 852 KB - Available: 1 543 688 KB

I 21:37:45 Initialising SPTI...

I 21:37:45 Searching for SCSI / ATAPI devices...

I 21:37:45 Found 1 DVD-ROM and 1 DVD±RW!

I 21:43:08 Operation Started!

I 21:43:08 Source File: F:\DVD-R\ial\bow-ial.dvdr.img

I 21:43:08 Source File Sectors: 2 266 931 (MODE1/2048)

I 21:43:08 Source File Size: 4 642 674 688 bytes

I 21:43:08 Source File Volume Identifier: I_AM_LEGEND

I 21:43:08 Source File Volume Set Identifier: 47B4B7240000000F

I 21:43:08 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 21:43:08 Source File Implementation Identifier: mkisofs

I 21:43:08 Source File File System(s): ISO9660; UDF (1.02)

I 21:43:08 Destination Device: [3:0:0] PLEXTOR DVDR PX-708A 1.12 (H:) (ATA)

I 21:43:08 Destination Media Type: DVD+RW (Disc ID: RICOHJPN-W11-01) (Speeds: 2,4x; 4x)

I 21:43:08 Destination Media Sectors: 2 295 104

I 21:43:08 Write Mode: DVD

I 21:43:08 Write Type: DAO

I 21:43:08 Write Speed: 2,4x

I 21:43:08 Link Size: Auto

I 21:43:08 Test Mode: No

I 21:43:08 OPC: Yes

I 21:43:08 BURN-Proof: Enabled

I 21:43:08 Book Type Setting: N/A

I 21:43:08 Advanced Settings - PowerRec: Yes

E 21:43:27 Optimum Power Calibration Failed! - Reason: Write Protected

E 21:43:27 Operation Failed! - Duration: 00:00:19

I 21:43:27 Average Write Rate: N/A - Maximum Write Rate: N/A

I 21:46:01 Close Request Acknowledged

I 21:46:01 Closing Down...

I 21:46:01 Shutting down SPTI...

I 21:46:01 ImgBurn closed!

;

;

; //****************************************\\

; ImgBurn Version 2.4.0.0 - Log

; onsdag, 05 mars 2008, 20:16:14

; \\****************************************//

;

;

I 18:59:39 ImgBurn Version 2.4.0.0 started!

I 18:59:39 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 18:59:39 Total Physical Memory: 2 095 852 KB - Available: 1 600 196 KB

I 18:59:40 Initialising SPTI...

I 18:59:40 Searching for SCSI / ATAPI devices...

I 18:59:40 Found 1 DVD-ROM and 1 DVD±RW!

I 19:00:18 Operation Started!

I 19:00:18 Device: [3:0:0] PLEXTOR DVDR PX-708A 1.12 (H:) (ATA)

I 19:00:18 Media Type: DVD+RW (Disc ID: ICOHJPN-W11-01) (Speeds: 2,4x; 4x)

I 19:00:18 Quick Erase: No

I 19:00:18 Erasing Disc...

I 19:15:24 Operation Successfully Completed! - Duration: 00:15:05

I 19:18:21 Operation Started!

I 19:18:21 Source File: F:\DVD-R\ial\bow-ial.dvdr.img

I 19:18:21 Source File Sectors: 2 266 931 (MODE1/2048)

I 19:18:21 Source File Size: 4 642 674 688 bytes

I 19:18:21 Source File Volume Identifier: I_AM_LEGEND

I 19:18:21 Source File Volume Set Identifier: 47B4B7240000000F

I 19:18:21 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 19:18:21 Source File Implementation Identifier: mkisofs

I 19:18:21 Source File File System(s): ISO9660; UDF (1.02)

I 19:18:21 Destination Device: [3:0:0] PLEXTOR DVDR PX-708A 1.12 (H:) (ATA)

I 19:18:21 Destination Media Type: DVD+RW (Disc ID: ICOHJPN-W11-01) (Speeds: 2,4x; 4x)

I 19:18:21 Destination Media Sectors: 2 295 104

I 19:18:21 Write Mode: DVD

I 19:18:21 Write Type: DAO

I 19:18:21 Write Speed: 2,4x

I 19:18:21 Link Size: Auto

I 19:18:21 Test Mode: No

I 19:18:21 OPC: Yes

I 19:18:21 BURN-Proof: Enabled

I 19:18:21 Book Type Setting: N/A

I 19:18:21 Advanced Settings - PowerRec: Yes

W 19:26:51 Optimum Power Calibration Failed! - Reason: Write Protected

W 19:26:51 Retrying (1)...

W 19:26:52 Retry Failed - Reason: Write Protected

W 19:26:52 Retrying (2)...

W 19:26:52 Retry Failed - Reason: Write Protected

W 19:26:52 Retrying (3)...

W 19:26:53 Retry Failed - Reason: Write Protected

W 19:26:53 Retrying (4)...

W 19:26:53 Retry Failed - Reason: Write Protected

W 19:26:53 Retrying (5)...

W 19:26:53 Retry Failed - Reason: Write Protected

W 19:26:53 Retrying (6)...

W 19:26:53 Retry Failed - Reason: Write Protected

W 19:26:53 Retrying (7)...

W 19:26:54 Retry Failed - Reason: Write Protected

W 19:26:54 Retrying (8)...

W 19:26:54 Retry Failed - Reason: Write Protected

W 19:26:54 Retrying (9)...

W 19:26:54 Retry Failed - Reason: Write Protected

W 19:26:54 Retrying (10)...

W 19:26:54 Retry Failed - Reason: Write Protected

W 19:26:54 Retrying (11)...

W 19:26:54 Retry Failed - Reason: Write Protected

W 19:26:54 Retrying (12)...

W 19:26:56 Optimum Power Calibration Failed! - Reason: Write Protected

I 19:26:56 Filling Buffer... (40 MB)

I 19:26:57 Writing LeadIn...

I 19:27:04 Writing Session 1 of 1... (1 Track, LBA: 0 - 2266930)

I 19:27:04 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2266930)

I 19:50:13 Synchronising Cache...

I 19:50:14 Closing Session...

I 19:50:15 Exporting Graph Data...

I 19:50:15 Graph Data File: C:\Documents and Settings\alper\Application Data\ImgBurn\IBG Files\PLEXTOR_DVDR_PX-708A_1.12_DEN-5-MARS-2008_19-18_ICOHJPN-W11-01_2,4x.ibg

I 19:50:15 Export Successfully Completed!

I 19:50:15 Operation Successfully Completed! - Duration: 00:31:53

I 19:50:15 Average Write Rate: 3 266 KB/s (2.4x) - Maximum Write Rate: 3 391 KB/s (2.4x)

I 19:50:15 Cycling Tray before Verify...

I 19:50:58 Device Ready!

I 19:51:00 Operation Started!

I 19:51:00 Source Device: [3:0:0] PLEXTOR DVDR PX-708A 1.12 (H:) (ATA)

I 19:51:00 Source Media Type: DVD+RW (Book Type: DVD+RW) (Disc ID: RICOHJPN-W11-01) (Speeds: 2,4x; 4x)

I 19:51:00 Image File: F:\DVD-R\ial\bow-ial.dvdr.img

I 19:51:00 Image File Sectors: 2 266 931 (MODE1/2048)

I 19:51:00 Image File Size: 4 642 674 688 bytes

I 19:51:00 Image File Volume Identifier: I_AM_LEGEND

I 19:51:00 Image File Volume Set Identifier: 47B4B7240000000F

I 19:51:00 Image File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING

I 19:51:00 Image File Implementation Identifier: mkisofs

I 19:51:00 Image File File System(s): ISO9660; UDF (1.02)

I 19:51:00 Read Speed (Data/Audio): MAX / MAX

I 19:51:00 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2266930)

I 19:51:00 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2266930)

I 20:13:33 Exporting Graph Data...

I 20:13:33 Graph Data File: C:\Documents and Settings\alper\Application Data\ImgBurn\IBG Files\PLEXTOR_DVDR_PX-708A_1.12_DEN-5-MARS-2008_19-18_ICOHJPN-W11-01_2,4x.ibg

I 20:13:33 Export Successfully Completed!

I 20:13:33 Operation Successfully Completed! - Duration: 00:22:27

I 20:13:33 Average Verify Rate: 3 365 KB/s (2.4x) - Maximum Verify Rate: 3 932 KB/s (2.8x)

I 20:16:13 Close Request Acknowledged

I 20:16:13 Closing Down...

I 20:16:14 Shutting down SPTI...

I 20:16:14 ImgBurn closed!

Link to comment
Share on other sites

Does it only error out like that on DVD+RW? What about normal DVD-R or DVD+R ?

 

If it happens on all discs, just turn off the 'Send OPC' option in the settings (Write tab).

 

I haven't tried it with normal DVD-R or DVD+R yet, I will try this asap and get back to you with the result.

Link to comment
Share on other sites

Trevligt att se någon från Sverige här! :)

 

Those RW discs are they old/scrached? I can get that issue sometimes with some of my scratched RWs.

 

Jepp, Sverige här! ;)

 

Yes, I would consider those RW discs a bit old/scratched but I managed to burn an .img file with the same disc on my laptop with Vista Business and a MATSHITA UJ-852S DVD-RAM Recorder in ImgBurn v2.4.0.0 without any OPC errors! Any clues?

Link to comment
Share on other sites

Does it only error out like that on DVD+RW? What about normal DVD-R or DVD+R ?

 

If it happens on all discs, just turn off the 'Send OPC' option in the settings (Write tab).

 

Version 2.4.0.0. Perform OPS Before Write?

Link to comment
Share on other sites

Does it only error out like that on DVD+RW? What about normal DVD-R or DVD+R ?

 

If it happens on all discs, just turn off the 'Send OPC' option in the settings (Write tab).

 

Today I tried with Verbatim branded Printable 16x DVD-R [MCC 03RG20] and no OPC errors at all! :P

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.