ross51681 Posted July 5, 2008 Share Posted July 5, 2008 Never really had a problem burning until this file. This is the error message i'm getting is attached. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 5, 2008 Share Posted July 5, 2008 post the log please Link to comment Share on other sites More sharing options...
ross51681 Posted July 5, 2008 Author Share Posted July 5, 2008 post the log please I 10:27:59 ImgBurn Version 2.4.1.0 started! I 10:27:59 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 10:27:59 Total Physical Memory: 1,037,824 KB - Available: 273,192 KB I 10:28:00 Initialising SPTI... I 10:28:00 Searching for SCSI / ATAPI devices... I 10:28:00 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 5, 2008 Share Posted July 5, 2008 W 10:42:46 Potential 'ReadBufferCapacity' Deferred Error - Write Error Ok so your drive complained about a 'Write Error' - meaning it had trouble burning to the disc. You could try looking for a firmware update on the (laptop?) manufacturers website but you should also think about using some higher quality discs - i.e. Verbatim or Taiyo Yuden. Link to comment Share on other sites More sharing options...
LOCOENG Posted July 5, 2008 Share Posted July 5, 2008 I 10:42:03 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 2x, 4x, 6x, 8x) Get some decent discs....such as Verbatim or Taiyo Yuden. I 10:42:03 Test Mode: Yes Luckily you don't have a coaster. Link to comment Share on other sites More sharing options...
Digerati Posted July 8, 2008 Share Posted July 8, 2008 (edited) Hmm burned about 5 coasters today trying to figure this out, all Verbatim 16X DVD+R burned on my Samsung SH-203B (SB01 and SB03) @ AUTO Write Speed. I used these same discs in the past with the same burner without problems before I upgraded to Vista. I noticed there once was a Potential 'WaitImmediateIO' Deferred Error which passed on the second try. I had an ImgBurn.ini in the program folder which I cleared because I figured certain XP settings may have persisted. My user account has 'User' rights but I have successfully burned other discs without being 'Administrator' on Vista. I usually burn at half the advertised rate. I am using AHCI. I wanted to post about this before burning more coasters. [EDIT] I also got the exact same error below with a different DVD+RW disc. Error Message Appears when Verify starts: ; //****************************************\\; ImgBurn Version 2.4.1.0 - Log; Monday, 07 July 2008, 23:47:02; \\****************************************//;;I 23:34:44 ImgBurn Version 2.4.1.0 started!I 23:34:44 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)I 23:34:44 Total Physical Memory: 2,094,544 KB - Available: 1,546,744 KBI 23:34:44 Initialising SPTI...I 23:34:44 Searching for SCSI / ATAPI devices...I 23:34:44 Found 1 DVD Edited July 8, 2008 by Digerati Link to comment Share on other sites More sharing options...
mmalves Posted July 8, 2008 Share Posted July 8, 2008 I 23:38:20 Destination Device: [2:0:0] TSSTcorp CDDVDW SH-S203B SB03 (F:) (ATA)I 23:38:20 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x, 20x) AUTO uses MAX write speed, unless you've actually configured the Automatic Write Speed feature. Have you tried burning at 16x, since that's the media's rated speed? You may want to try at 8x or 12x too. By the way, there's firmware SB04 for that burner Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 8, 2008 Share Posted July 8, 2008 Maybe I should change 'AUTO' to 'AWS' as it seems to catch a lot of people out that don't really know ImgBurn. Link to comment Share on other sites More sharing options...
Recommended Posts