Jump to content
Sign in to follow this  
Pain_Man

Verify error...uh, HELP, s'il te plait...

Recommended Posts

Was burning a copy of a disc for my wife's company (at the owner's request, hence perfectly legal).

 

The burn went fine, but when it came to Verification, I got this message:

 

(In a pop up):

 

Verify failed! Reason: Layouts do not match.

 

I understand the plain English meaning of the words but not their meaning in the optical media context.

 

Here's the relevant portion of the Log:

 

I 12:29:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4130927)

I 12:29:32 Writing Layer 0... (LBA: 0 - 2065471)

I 12:38:08 Writing Layer 1... (LBA: 2065472 - 4130927)

I 12:46:46 Synchronising Cache...

I 12:47:50 Closing Track...

I 12:47:57 Finalising Disc...

W 12:49:34 Potential 'WaitImmediateIO' Deferred Error - (0/3) - No Seek Complete

W 12:49:34 Finalise Disc Failed! - Reason: No Seek Complete

W 12:49:34 Retrying (1 of 3)...

 

 

Should I even try to burn another copy--or would that just be wasting a DL?

 

All help is appreciated...

Edited by Pain_Man

Share this post


Link to post
Share on other sites

Could you post the whole log of that burn + verify?

Share this post


Link to post
Share on other sites

I will post the whole thing.

 

The next disc I burned, it verified with no problems. I'm watching the GOP Convention, so I'll put it up later.

 

Could you post the whole log of that burn + verify?

Share this post


Link to post
Share on other sites

Here's the entire log (I also uploaded the DVDInfoPro graph):

 

 

I 12:27:41 ImgBurn Version 2.4.2.0 started!

I 12:27:41 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 12:27:41 Total Physical Memory: 3,140,920 KB - Available: 2,204,448 KB

W 12:27:41 Drive P:\ (FAT32) does not support single files > 4 GB in size.

I 12:27:41 Initialising Patin-Couffin...

I 12:27:41 Patin-Couffin - VSO Software - Version 1.37.0.0 - Internal Revision 37

I 12:27:41 Searching for SCSI / ATAPI devices...

I 12:27:41 Found 2 DVD-ROMs, 1 DVD

XXXXXXX_PLEXTOR_DVDR_PX_760A_1.07_8_31_2008_12_28_PM_MKM_001_00.ibg

Share this post


Link to post
Share on other sites

Your drive made a duff burn.

 

The disc didn't close properly and so the TOC (table of contents) was messed up.

 

That's why it then said the disc layouts do not match.

 

By all means try another disc. If the same happens again, check your verbs are the 'made in Singapore' ones. You could then try cleaning the drive.

 

If all else fails (even a totally different spindle of verbs), consider purchasing a new drive - yours may have developed a fault.

Share this post


Link to post
Share on other sites

Thanks, Lightning.

 

Pretty sure it was just a coaster.

 

I suppose I should try to get a refund, on the other, since the disc contains sensitive corporate information and all, can't really do that.

 

But I can't complain. I've burnt hundreds of Verb DLs and have had maybe five coasters? It's happened so rarely (knock on wood!) that I can't remember the time before this disc.

 

Have had no issues with other discs from that spindle.

 

What's the deal with "made in Singepore" Verbs?

 

Is there a product code that one can use to tell which discs were made where?

 

Having trouble posting here. Sorry for any duplications.

 

Ciao

 

Your drive made a duff burn.

 

The disc didn't close properly and so the TOC (table of contents) was messed up.

 

That's why it then said the disc layouts do not match.

 

By all means try another disc. If the same happens again, check your verbs are the 'made in Singapore' ones. You could then try cleaning the drive.

 

If all else fails (even a totally different spindle of verbs), consider purchasing a new drive - yours may have developed a fault.

Edited by Pain_Man

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.