Jump to content
Sign in to follow this  
bogdan03

ISO BURNING ON DUAL LAYER

Recommended Posts

Hello. I have a problem burning a downloaded ISO file to a DVD+R DL. The ISO it'a a movie and it is about 7.2 Gb. I have ASUS DRW-2014L1T and I used MAXELL DVD+R DL 2.4X. I used nero 7 and I got 2 errors (i could not set the speed lower than 4 x) : "could not perform end of DAO" and "Power calibration error". I inserted back the DVD and it didn't play automatically in windows (as it usually does when i insert a DVD movie). I managed to open it with media player but I could only play 12 chapters out of 16. I took out the DVD and put it back (still no autoplay) and it worked fine (all 16 chapters) But when I inserted the DVD in another PC, it looked as the media was empty. Then I inserted the DVD in my DVD Player ( a samsung) and it played aroud 50 minutes and then it froze.

I installed ImgBurn and I tried to write another movie ISO file (about 5.2 Gb). I used the same media. I set the speed to 2.4X. I left the layer brake to auto. At the end I got 2 errors: could not perform end of DAO -or something like that (the session could not be closed) and cache syncronization error (though this last error occured when i burned a single layer dvd rw and it worked fine).Anyways, i inserted the dvd back, no auto play but media player played it ok with no problem from the begining to the end. My other PC saw it as a blank media and the samsung DVD player froze after 50 minutes or so.

I need you to help me and tell me what to do to write this images with no problem because I want them played on a DVD PLAYER, not the PC.

Thank You!

This is the error report from NERO

 

Windows XP 5.1

IA32

WinAspi: -

ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 5/7/2007 6:37:00 PM

 

NT-SPTI used

Nero Version: 7.5.14.4

Internal Version: 7, 5, 14, 4

(Nero Express)

Recorder: <ASUS DRW-2014L1T> Version: 1.00 - HA 1 TA 0 - 7.5.14.4

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : via Inquiry data (1) -> ATAPI, detected: ?

Connected to MMC as unknown drive with class-nr : 1

Drive is autodetected - recorder class: Std. MMC recorder

CD-ROM: <CBG QVCXQJ8XI38T >Version: 1.03 - HA 1 TA 1 - 7.5.14.4

Adapter driver: <IDE> HA 1

 

=== Scsi-Device-Map ===

DiskPeripheral : ST3500320AS SD15 nvgts Port 2 ID 0 DMA: Off

DiskPeripheral : ST3500630AS 3.AA nvgts Port 2 ID 1 DMA: Off

CdRomPeripheral : ASUS DRW-2014L1T 1.00 nvgts Port 3 ID 0 DMA: Off

CdRomPeripheral : CBG QVCXQJ8XI38T 1.03 abjgodq8 Port 5 ID 0 DMA: Off

 

=== CDRom-Device-Map ===

ASUS DRW-2014L1T K: CDRom0

CBG QVCXQJ8XI38T L: CDRom1

=======================

 

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 2046MB (2095532kB)

Free physical memory: 1556MB (1594000kB)

Memory in use : 23 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

 

15.1.2009

Burn DVD Image

9:16:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

9:16:09 PM #2 Text 0 File Burncd.cpp, Line 3490

Turn on Disc-At-Once, using DVD media

 

9:16:09 PM #3 Text 0 File DlgWaitCD.cpp, Line 307

Last possible write address on media: 4173823 (927:30.73, 8151MB)

Last address to be written: 4039331 (897:37.56, 7889MB)

 

9:16:09 PM #4 Text 0 File DlgWaitCD.cpp, Line 319

Write in overburning mode: NO (enabled: CD)

 

9:16:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 2940

Recorder: ASUS DRW-2014L1T, Media type: DVD+R9 Double Layer

Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1

Disc Application Code: 0, Extended Information Indicators: 0

 

9:16:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 493

>>> Protocol of DlgWaitCD activities: <<<

=========================================

 

9:16:09 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 792

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)

2 indices, index0 (150) not provided

original disc pos #0 + 4039332 (4039332) = #4039332/897:37.57

not relocatable, disc pos for caching/writing not required/not required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4039332 blocks [K: ASUS DRW-2014L1T]

--------------------------------------------------------------

 

9:16:09 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995

Prepare [K: ASUS DRW-2014L1T] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8272551936, ISRC ""

DAO layout:

===========

___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________

0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 4039332 | 4039332 | 0x00

4039332 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

 

9:16:09 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

 

9:16:09 PM #10 Text 0 File Burncd.cpp, Line 4263

Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

 

9:16:09 PM #11 Phase 24 File dlgbrnst.cpp, Line 1760

Caching of files started

 

9:16:09 PM #12 Text 0 File Burncd.cpp, Line 4382

Cache writing successful.

 

9:16:09 PM #13 Phase 25 File dlgbrnst.cpp, Line 1760

Caching of files completed

 

9:16:09 PM #14 Phase 36 File dlgbrnst.cpp, Line 1760

Burn process started at 4x (5,540 KB/s)

 

9:16:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2712

Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

 

9:16:10 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 477

Disc finalized, LBA total Image size: 4039332 (7889MB), Last LBA L0: 2019679 (3944MB)

 

9:16:52 PM #17 SPTI -1066 File SCSIPassThrough.cpp, Line 179

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00

Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

Buffer x04c15600: Len x804

 

9:16:52 PM #18 Text 0 File DVDPlusDualLayer.cpp, Line 642

L0 Data Zone Capacity set to 2019680 (1ED160h, 3944MB) -> OK, confirmed setting

 

9:16:52 PM #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 669

Burning Layer 1

 

9:16:52 PM #20 Text 0 File DVDPlusDualLayer.cpp, Line 679

Start writing layer 1 at address 0 (0h)

Recording mode: unknown Recording Mode

 

9:16:52 PM #21 Text 0 File Cdrdrv.cpp, Line 9873

---- Disc Structure: Physical Format Information (00h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD+R DL (14), Part Version: 1.0x (1)

Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable

Linear Density: 0,293 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)

Data in Burst Cutting Area (BCA) does not exist

Disc Application Code: 0 / 0 h

Extended Information indicators: 0 h

Disc Manufacturer ID: RITEK...

Media type ID: D01

Product revision number: 1

Number of Physical format information bytes in use in ADIP up to byte 63: 64

Media Specific [16..63]:

00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@

25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......

02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................

 

9:16:52 PM #22 Text 0 File Cdrdrv.cpp, Line 9873

---- Disc Structure: Physical Format Information (00h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD+R DL (14), Part Version: 1.0x (1)

Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable

Linear Density: 0,293 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)

Data in Burst Cutting Area (BCA) does not exist

Disc Application Code: 0 / 0 h

Extended Information indicators: 0 h

Disc Manufacturer ID: RITEK...

Media type ID: D01

Product revision number: 1

Number of Physical format information bytes in use in ADIP up to byte 63: 64

Media Specific [16..63]:

00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@

25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......

02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................

 

9:16:52 PM #23 Text 0 File DVDR.cpp, Line 8308

Drive: ASUS DRW-2014L1T

Book Type request [ASUS]: DVD-ROM

Changing the Book Type was finished successfully, return code 0

 

9:16:52 PM #24 CDR -1207 File DVDR.cpp, Line 6357

Book Type automatically set to: DVD-ROM

 

9:16:52 PM #25 Text 0 File DVDPlusRW.cpp, Line 675

Start write address at LBA 0

DVD high compatibility mode: Yes

 

9:16:52 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269

Pipe memory size 83836800

 

9:29:37 PM #27 CDR -1206 File DVDPlusDualLayer.cpp, Line 1958

Burning Layer 2

 

9:29:37 PM #28 Text 0 File DVDPlusDualLayer.cpp, Line 1969

Perform layer 1 to 2 jump before writing at address 2019680 (1ED160h)

 

9:42:24 PM #29 Text 0 File WriterStatus.cpp, Line 113

<K: ASUS DRW-2014L1T> start writing Lead-Out at LBA 4039332 (3DA2A4h), length 0 blocks

 

9:43:01 PM #30 SPTI -1106 File SCSIPassThrough.cpp, Line 179

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00

Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03

 

9:43:01 PM #31 SPTI -1169 File SCSIPassThrough.cpp, Line 179

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x04

Sense Qual: 0x08

CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00

Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08

 

9:43:11 PM #32 Text 0 File DVDPlusRW.cpp, Line 935

EndDAO: Last written address 4039344

 

9:43:11 PM #33 CDR -1106 File ThreadedTransferInterface.cpp, Line 1891

Power calibration error

K: ASUS DRW-2014L1T

 

9:43:11 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1891

Could not perform end of Disc-at-once

 

9:43:43 PM #35 SPTI -1106 File SCSIPassThrough.cpp, Line 179

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x03

CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00

Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03

 

9:43:43 PM #36 SPTI -1176 File SCSIPassThrough.cpp, Line 179

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x72

Sense Qual: 0x03

CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00

Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

 

9:43:43 PM #37 Phase 127 File dlgbrnst.cpp, Line 1760

Generating DVD high compatibility borders

 

9:43:43 PM #38 Text 0 File DVDPlusRW.cpp, Line 935

EndDAO: Last written address 0

 

9:43:43 PM #39 CDR -1106 File WriterStatus.cpp, Line 162

Power calibration error

K: ASUS DRW-2014L1T

 

9:43:43 PM #40 TRANSFER -24 File WriterStatus.cpp, Line 162

Could not perform end of Disc-at-once

 

9:43:43 PM #41 Phase 38 File dlgbrnst.cpp, Line 1760

Burn process failed at 4x (5,540 KB/s)

 

9:43:43 PM #42 Text 0 File SCSIPTICommands.cpp, Line 254

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

 

9:43:46 PM #43 Text 0 File Cdrdrv.cpp, Line 11108

DriveLocker: UnLockVolume completed

 

9:43:46 PM #44 Text 0 File SCSIPTICommands.cpp, Line 411

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

 

Existing drivers:

File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/8/2007 1:51:00 AM

File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/8/2007 1:51:00 AM (Prassi/Veritas driver for win 2K)

 

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option

Share this post


Link to post
Share on other sites

Hi

Welcome to the ImgBurn support Forum :)

 

although we will help you as best we can, unfortunately, a nero log file is about as much use as a very used piece of toilet paper to us or even a chocolate watch on a sunny day ! . As we all use ImgBurn, none of us would be able to tell you what went wrong form the Nero log file.

 

We can all guess for hours as to whats wrong , but instead of wasting your time and ours , Its best you post a log file of an ImgBurn session :thumbup: Like what the pink banenr at the top of this page suggests .

regards

Share this post


Link to post
Share on other sites

Hi and welcome to the forum, bogdan03! :)

 

You got a calibration error. Pretty much that your writer doesn't like your brand of discs.

 

There is a later firmware for that writer to install. You now have ver 1.00

 

ASUS DRW-2014L1T firmware version 1.02

1. Improve burning quality

You can find it at the Asus homepage. At this place: "Location: Download> Optical Storage> DRW-2014L1T".

 

http://support.asus.com/download/download....SLanguage=en-us

 

http://dlsvr04.asus.com/pub/ASUS/ODD/DVD-R...2014L1T_102.zip

Share this post


Link to post
Share on other sites
Hi and welcome to the forum, bogdan03! :)

 

You got a calibration error. Pretty much that your writer doesn't like your brand of discs.

 

There is a later firmware for that writer to install. You now have ver 1.00

 

ASUS DRW-2014L1T firmware version 1.02

1. Improve burning quality

You can find it at the Asus homepage. At this place: "Location: Download> Optical Storage> DRW-2014L1T".

 

http://support.asus.com/download/download....SLanguage=en-us

 

http://dlsvr04.asus.com/pub/ASUS/ODD/DVD-R...2014L1T_102.zip

 

SORRY. I FORGOT TO MENTION THAT I UPDATED THE FIRMWARE TO VERSION 1.02 BEFORE BURNING THE SECOND DISK WITH IMG BURN. I THINK THAT MY PROBLEM CONCERNS THE BURNING OF THE SECOND LAYER. AND I'M VERY SORRY BUT I DIDN'T SAVE THE IMGBURN LOG. ALL I HAVE IS THE NERO LOG.

Edited by bogdan03

Share this post


Link to post
Share on other sites

I FOUND THIS IN IMGBURN LOG

 

19:11:03 ImgBurn Version 2.4.2.0 started!

I 19:11:03 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 19:11:03 Total Physical Memory: 2,095,532 KB - Available: 1,642,036 KB

I 19:11:03 Initialising SPTI...

I 19:11:03 Searching for SCSI / ATAPI devices...

I 19:11:03 Found 1 DVD

Share this post


Link to post
Share on other sites

The only available speed for that media is 4x.

 

I do think you should try Verbatims. The 2.4x rated Made in Singapore seems be less issues with.

Share this post


Link to post
Share on other sites
The only available speed for that media is 4x.

 

I do think you should try Verbatims. The 2.4x rated Made in Singapore seems be less issues with.

 

Can anyone tell me about the layer brek? Which is best ? to leave it on auto or to set the sectors manually?

Share this post


Link to post
Share on other sites
I 19:11:48 Source File Size: 5,300,094,976 bytes

 

It wouldn't take much to compress that to fit onto a single layer disc. You'll save some money on media and won't be giving up much, if any, quality.

 

This is where you decide which bit of the film should be the first bit after the layer jump (where the player may pause for a second as the laser moves from layer 1 to layer 2).

 

You might get one option here or you could get several. If there's only one, it's obvious which one you need to select! If there's more than one, select the one with the best rating - look at the stars!

 

http://forum.imgburn.com/index.php?showtopic=1780

Share this post


Link to post
Share on other sites

.

It wouldn't take much to compress that to fit onto a single layer disc. You'll save some money on media and won't be giving up much, if any, quality

 

Ok. But what about the 7.71 GB ISO? Anyways, I started this topid because I want to learn how to properly burn images on dual layer, not single layer. And I ask again: layer break -user specified or "calculate optimal"? because I read somewhere that for XBOX the layer break sectors shold be 1913760 (sa that the XBOX can read the DVD). Maybe for video files there is another value. Can anyone tell me what the value is? Did anyone burned a 7 GB movie on a dual layer with no problem? Did the DVD PLAYER read the DVD from begining to end? this is what I'm looking for, not compressing the files to a single layer. I have a image, i want it on a single DVD. Like I do with my other movies which I burn on the single layer DVD. Thank You

Share this post


Link to post
Share on other sites
Ok. But what about the 7.71 GB ISO?

 

DVD Rebuilder should handle it nicely...

 

And I ask again: layer break -user specified or "calculate optimal"?

 

Take your pick...I post again ~ http://forum.imgburn.com/index.php?showtopic=1780

 

You are choosing the MDS file to burn from, which you should, and it (should) contains the proper layer break information.

 

because I read somewhere that for XBOX the layer break sectors shold be 1913760 (sa that the XBOX can read the DVD).

 

This is the first we've heard about XBOX issues....you have to set the layer break at 1913760 or you are pissing in the wind and wasting a disc regarding Xbox. Movies you can use the preview to select the best layer break position so that you don't get a 'jump' in a action sequence or whot not.

 

Can anyone tell me what the value is?

 

There is no magic number for movies.

 

Did anyone burned a 7 GB movie on a dual layer with no problem?

 

Yes

 

Did the DVD PLAYER read the DVD from begining to end?

 

Yes

Share this post


Link to post
Share on other sites
Ok. But what about the 7.71 GB ISO?

 

DVD Rebuilder should handle it nicely...

 

And I ask again: layer break -user specified or "calculate optimal"?

 

Take your pick...I post again ~ http://forum.imgburn.com/index.php?showtopic=1780

 

You are choosing the MDS file to burn from, which you should, and it (should) contains the proper layer break information.

 

because I read somewhere that for XBOX the layer break sectors shold be 1913760 (sa that the XBOX can read the DVD).

 

This is the first we've heard about XBOX issues....you have to set the layer break at 1913760 or you are pissing in the wind and wasting a disc regarding Xbox. Movies you can use the preview to select the best layer break position so that you don't get a 'jump' in a action sequence or whot not.

 

Can anyone tell me what the value is?

 

There is no magic number for movies.

 

Did anyone burned a 7 GB movie on a dual layer with no problem?

 

Yes

 

Did the DVD PLAYER read the DVD from begining to end?

 

Yes

 

I don't get "a jump" in the movie. The movie frezees.Period. If I select a scene in the menu which is on the second layer, it doesn't play it.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.