Jump to content

Curb Your Enthusiam Season 4 Disc 2


Brian002100

Recommended Posts

Anyone tried burning Curb Your Enthusiam Season 4 Disc 2. I keep getting an error. I was stupid and didnt save the log and dont want to waste another DVD just to get the log. Does anyone know of problems that people have had with this DVD?

 

the problem is you're discussing ripping copyrighted material here and thats a no no for legal reasons,it was the reason dvdxxx is no longer with us

Link to comment
Share on other sites

You're circumventing copy protection. That IS illegal I'm afraid.

 

Fair use etc only applies if the manufacturers haven't added copy protection to stop you from copying it. All (well, 99%) of DVDs have copy protection on them.

 

In any case, if you're getting an error during the burn, it's not due to what you're burning. The drive doesn't give a monkies about what's being written to the disc.

 

If you're not willing to attempt another burn, load a disc in the drive and copy + paste the info from the window on the right in ImgBurn.

Link to comment
Share on other sites

I just got this burning something else, but I think its the same error...

 

I 10:58:15 ImgBurn Version 1.2.0.0 started!

I 10:58:15 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 10:58:15 Initialising SPTI...

I 10:58:15 Searching for SCSI / ATAPI devices...

I 10:58:15 Found 1 DVD-R!

I 10:58:17 Operation Started!

I 10:58:17 Source File: C:\DOCUMENTS AND SETTINGS\BRIAN\MY DOCUMENTS\MY VIDEOS\JUST_CAUSE_16X9_LB_NA_SIDE_A.ISO

I 10:58:17 Source File Sectors: 2,143,174 (MODE1/2048)

I 10:58:17 Source File Size: 4,389,220,352 bytes

I 10:58:17 Source File Implementation Identifier: DVD Shrink

I 10:58:17 Destination Device: [1:0:0] SONY DVD+-RW DW-D56A PDS7 (D:) (ATA)

I 10:58:17 Destination Media Type: DVD+R (Disc ID: MCC-003-00) (Speeds: 2.4x, 4x)

I 10:58:17 Destination Media Sectors: 2,295,104

I 10:58:17 Write Mode: DVD

I 10:58:17 Write Type: DAO

I 10:58:17 Write Speed: MAX

I 10:58:17 Link Size: Auto

I 10:58:17 Test Mode: No

I 10:58:17 BURN-Proof: Enabled

I 10:58:17 Filling Buffer...

I 10:58:18 Writing LeadIn...

I 10:58:56 Writing Image...

W 11:02:05 Failed to Write Sectors 436096 - 436127 - Write Error

W 11:02:07 Retrying (1 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (2 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (3 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (4 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (5 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (6 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (7 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (8 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (9 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (10 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (11 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (12 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (13 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (14 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (15 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (16 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (17 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (18 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (19 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:07 Retrying (20 of 20)...

W 11:02:07 Retry Failed - Invalid Address For Write

W 11:02:31 Retrying (21)...

W 11:02:31 Retry Failed - Invalid Address For Write

W 11:02:34 Retrying (22)...

W 11:02:34 Retry Failed - Invalid Address For Write

E 11:02:35 Failed to Write Sectors 436096 - 436127 - Write Error

I 11:02:35 Synchronising Cache...

I 11:02:36 Closing Track...

I 11:02:37 Finalising Disc...

E 11:02:38 Failed to Write Image!

E 11:02:38 Operation Failed! - Duration: 00:04:21

I 11:02:38 Average Write Rate: 4,000 KB/s (2.9x) - Maximum Write Rate: 5,796 KB/s (4.2x)

 

 

 

 

I have the latest driver for my DVD burner and have been using the same DVD+Rs all the time.

Link to comment
Share on other sites

I just got this burning something else, but I think its the same error...

 

I 10:58:15 ImgBurn Version 1.2.0.0 started!

I 10:58:15 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 10:58:15 Initialising SPTI...

I 10:58:15 Searching for SCSI / ATAPI devices...

I 10:58:15 Found 1 DVD-R!

I 10:58:17 Destination Device: [1:0:0] SONY DVD+-RW DW-D56A PDS7 (D:) (ATA)

I 10:58:17 Destination Media Type: DVD+R (Disc ID: MCC-003-00) (Speeds: 2.4x, 4x)

 

 

just found this wierd, it says found a DVD-R drive. and the disk is DVD+R.

Maybe your drive does not like dvd+r disks.

 

BTW did you in anyway crossflash this drive?

from DVD+RW to DVD+-RW.

if yes maybe this is the problem.

Edited by dirio49
Link to comment
Share on other sites

You could try some other media, MCC-003-00 is 8x rated and your drive only supports it at 4x. That leads me to believe it's just not 100% supported on your drive.

 

Various reports on google etc tend to say the drive isn't very good in it's own right.

Shame you're working with a laptop, desktop users have far more choice.

Link to comment
Share on other sites

No 2 discs are ever the same.

 

You could be being lucky when it does burn, and unless you do a proper PIPO scan after you've burnt it, you have no real way of knowing how good the burn is.

 

You could try putting the real LiteOn 852 firmware on the drive, that might be better than Sony's version.

Link to comment
Share on other sites

This the luck factor kicking in. Of course luck could be working in either direction so maybe you were unlucky on the ones that failed rather than the other way around as I mentioned earlier.

Do check the state of the burning surface before you stick the discs in the tray too. Often they have dirt / dust on them and that would cause the burn to fail.

 

Your drive would only ever burn at 4x max as that's all it can handle.

I 10:58:17 Destination Media Type: DVD+R (Disc ID: MCC-003-00) (Speeds: 2.4x, 4x)

 

Physically setting the write speed to 4x shouldn't make any difference.

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.