markoslo Posted April 3, 2009 Share Posted April 3, 2009 Hi, I tried to burn a xbox 360 game to an Verbatim dvd+r dl, and after like 15-20% I got the "buggy sense area" error. Google didn't find anything on this error, so could anyone tell me what this error mean? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 3, 2009 Share Posted April 3, 2009 post your log. Link to comment Share on other sites More sharing options...
markoslo Posted April 3, 2009 Author Share Posted April 3, 2009 ; //****************************************\\ ; ImgBurn Version 2.4.3.0 - Log ; petek, 03 april 2009, 16:50:30 ; \\****************************************// ; ; I 16:29:44 ImgBurn Version 2.4.3.0 started! I 16:29:44 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 16:29:44 Total Physical Memory: 2.096.100 KB - Available: 1.332.136 KB I 16:29:44 Initialising SPTI... I 16:29:44 Searching for SCSI / ATAPI devices... I 16:29:44 Found 1 DVD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 3, 2009 Share Posted April 3, 2009 It's probably because you've got an optical drive on a controller that's set up for RAID - optical drives don't like that. What type of controller is it? NVIDIA, Intel? Link to comment Share on other sites More sharing options...
mmalves Posted April 3, 2009 Share Posted April 3, 2009 I 16:32:07 Destination Device: [4:1:0] Optiarc DVD RW AD-7170A 1.02 (F:) (RAID) http://www.firmwarehq.com/Optiarc/AD-7170A/files.html Link to comment Share on other sites More sharing options...
markoslo Posted April 4, 2009 Author Share Posted April 4, 2009 (edited) I think its't an intel controller (http://www.asus.com/product.aspx?P_ID=Bxda...&templete=2) I tried to run that flash program, but it always says flash failed, I also tried flash it in safe mode. Edited April 4, 2009 by markoslo Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 4, 2009 Share Posted April 4, 2009 Try connecting the drive to either port 5 or 6 (possibly 4 or 5 if they number them from 0!) Oh and make sure it's not on the Silicon Image controller - just incase that one is a bit picky. You might also like to install the latest Intel Matrix driver from here - http://support.intel.com/support/chipsets/imsm/ Link to comment Share on other sites More sharing options...
markoslo Posted April 4, 2009 Author Share Posted April 4, 2009 You mean sata port 5 or 6? I is a pata drive, not sata. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 4, 2009 Share Posted April 4, 2009 Oops, my bad So basically you have the drive on a marvell IDE controller... good luck with that! Get yourself a silicon image 680 pci ide controller card or ditch the drive and buy an sata one. Of course if you're lucky enough to find a newer driver for the marvell controller that might fix it too. Don't forget to update your motherboard bios and hunt around inside it for an option to run the controller in legacy/ide/ata mode. EDIT: IF you haven't already, try the top driver from the SATA section on this page: http://support.asus.com/download/download....SLanguage=en-us Link to comment Share on other sites More sharing options...
Recommended Posts