8 replies to this topic

[CariMDP]

Good Afternoon

I have 2 recorders from the same brand, with new firmware ... one of them started to fail with the IMGBURN withing recording to the other

I leave the log, family tree and debug with F8

Registro

I 19:24:55 ImgBurn Version 2.5.7.0 started!
I 19:24:55 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 19:24:55 Total Physical Memory: 3.397.816 KB - Available: 2.099.192 KB
I 19:24:55 Initialising SPTI...
I 19:24:55 Searching for SCSI / ATAPI devices...
I 19:24:56 -> Drive 1 - Info: ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:24:57 -> Drive 2 - Info: ATAPI iHAS122 ZL0F (J:) (ATA)
I 19:24:57 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)
I 19:24:57 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!
I 19:25:41 Operation Started!
I 19:25:41 Source File: P:\Cumple.iso
I 19:25:41 Source File Sectors: 2.285.862 (MODE1/2048)
I 19:25:41 Source File Size: 4.681.445.376 bytes
I 19:25:42 Source File Volume Identifier: CUMPLE
I 19:25:42 Source File Volume Set Identifier: AE2D068ADVDSHRNK
I 19:25:42 Source File Implementation Identifier: DVD Shrink
I 19:25:42 Source File File System(s): ISO9660; UDF (1.02)
I 19:25:42 Destination Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:25:42 Destination Media Type: DVD-R (Disc ID: RITEKG05)
I 19:25:42 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x
I 19:25:42 Destination Media Sectors: 2.298.496
I 19:25:42 Write Mode: DVD
I 19:25:42 Write Type: DAO
I 19:25:42 Write Speed: 4x
I 19:25:42 Link Size: Auto
I 19:25:42 Lock Volume: Yes
I 19:25:42 Test Mode: No
I 19:25:42 OPC: Yes
I 19:25:42 BURN-Proof: Disabled
I 19:25:42 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)
I 19:25:42 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: Yes, SmartBurn: Yes
E 19:25:42 Failed to set Write Parameters!
E 19:25:42 Reason: Invalid Field in Parameter List
E 19:25:44 Operation Failed! - Duration: 00:00:02
I 19:25:44 Average Write Rate: N/A - Maximum Write Rate: N/A

I 19:27:27 Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:27:27 Family Tree:
I 19:27:27 -> Equipo basado en ACPI x86
I 19:27:27 -> Sistema Microsoft compatible con ACPI
I 19:27:27 -> Bus PCI
I 19:27:27 -> Controladora de almacenamiento ATA serie Intel® 82801GB/GR/GH (familia ICH7) - 27C0 (VEN_8086&DEV_27C0 - Intel - intelide - v6.1.7601.17514)
I 19:27:27 -> Canal IDE (ATA Channel 1)
I 19:27:27 -> Unidad de CD-ROM (ATAPI iHAS122 ATA Device) (Channel 1, Target 1, Lun 0)

Pressing F8

I 19:28:26 Operation Started!
I 19:28:26 Source File: P:\Cumple.iso
I 19:28:26 Source File Sectors: 2.285.862 (MODE1/2048)
I 19:28:26 Source File Size: 4.681.445.376 bytes
I 19:28:26 Source File Volume Identifier: CUMPLE
I 19:28:26 Source File Volume Set Identifier: AE2D068ADVDSHRNK
I 19:28:26 Source File Implementation Identifier: DVD Shrink
I 19:28:26 Source File File System(s): ISO9660; UDF (1.02)
I 19:28:26 Destination Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 Destination Media Type: DVD-R (Disc ID: RITEKG05)
I 19:28:26 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x
I 19:28:26 Destination Media Sectors: 2.298.496
I 19:28:26 Write Mode: DVD
I 19:28:26 Write Type: DAO
I 19:28:26 Write Speed: 4x
I 19:28:26 Link Size: Auto
I 19:28:26 Lock Volume: Yes
I 19:28:26 Test Mode: No
I 19:28:26 OPC: Yes
I 19:28:26 BURN-Proof: Disabled
W 19:28:26 I/O Interface 'Debug Mode' has been Enabled!
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 1E 00 00 00 01 00
I 19:28:26 CDB Interpretation: Prevent/Allow Medium Removal
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 35 00 00 00 00 00 00 00 00 00
I 19:28:26 CDB Interpretation: Synchronise Cache
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: B6 00 00 00 00 00 00 00 00 00 1C 00
I 19:28:26 CDB Interpretation: Set Streaming
I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 00 23 10 1F 00 00 56 90 00 00 03 E8 00 00 15 A4 00 00 03 E8
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 5A 00 2A 00 00 00 00 00 FC 00
I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x2A) - CD/DVD Capabilities and Mechanical Status
I 19:28:26 BUFFER: 00 4E 41 00 00 00 00 00 2A 46 3F 37 F1 77 2B 23 56 90 01 00 06 00 56 90 00 10 56 90 15 A4 00 01 00 00 00 00 15 A4 00 05 00 01 56 90 00 00 40 EC 00 00 2B 48 00 00 20 76 00 00 15 A4 00 00 00 00
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: AC 14 00 00 00 00 00 00 00 01 00 00
I 19:28:26 CDB Interpretation: Get Performance
I 19:28:26 BUFFER: 00 00 00 14 02 00 00 00 00 00 00 00 00 00 15 A4 00 23 12 7F 00 00 15 A4
I 19:28:26 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00
I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON)
I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00
I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON)
I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00
I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON)
I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 5A 00 30 00 00 00 00 00 18 00
I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x30) - Vendor Specific (LITE-ON)
I 19:28:26 BUFFER: 00 16 41 00 00 00 00 00 30 0E 2E 04 00 00 00 00 00 00 00 00 00 00 00 00
I 19:28:26 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: Yes, SmartBurn: Yes
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 46 02 00 00 00 00 00 00 0C 00
I 19:28:26 CDB Interpretation: Get Configuration - Profile List
I 19:28:26 BUFFER: 00 00 00 40 00 00 00 11 00 00 03 38
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 5A 00 05 00 00 00 00 00 FC 00
I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x05) - Write Parameters
I 19:28:26 BUFFER: 00 3A 41 00 00 00 00 00 05 32 42 05 08 10 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 5A 00 85 00 00 00 00 00 FC 00
I 19:28:26 CDB Interpretation: Mode Sense (10) - Page Code (0x05) - Write Parameters
I 19:28:26 BUFFER: 00 3A 41 00 00 00 00 00 05 32 40 05 08 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00
I 19:28:26 CDB Interpretation: Mode Select (10)
I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 40 05 08 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00
E 19:28:26 SENSE SK Interpretation: Illegal Request
E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 46 02 00 21 00 00 00 00 FC 00
I 19:28:26 CDB Interpretation: Get Configuration - Incremental Streaming Writable
I 19:28:26 BUFFER: 00 00 00 10 00 00 00 11 00 21 0D 08 01 00 01 02 01 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00
I 19:28:26 CDB Interpretation: Mode Select (10)
I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 22 25 08 10 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00
E 19:28:26 SENSE SK Interpretation: Illegal Request
E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00
I 19:28:26 CDB Interpretation: Mode Select (10)
I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 02 25 08 00 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00
E 19:28:26 SENSE SK Interpretation: Illegal Request
E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00
I 19:28:26 CDB Interpretation: Mode Select (10)
I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 22 05 08 10 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E 19:28:26 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00
E 19:28:26 SENSE SK Interpretation: Illegal Request
E 19:28:26 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List
I 19:28:26 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:26 CDB: 55 10 00 00 00 00 00 00 3C 00
I 19:28:26 CDB Interpretation: Mode Select (10)
I 19:28:26 BUFFER: 00 00 00 00 00 00 00 00 05 32 02 05 08 00 00 00 00 00 00 00 00 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E 19:28:27 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00
E 19:28:27 SENSE SK Interpretation: Illegal Request
E 19:28:27 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List
I 19:28:27 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:27 CDB: 55 10 00 00 00 00 00 00 3C 00
I 19:28:27 CDB Interpretation: Mode Select (10)
I 19:28:27 BUFFER: 00 00 00 00 00 00 00 00 05 32 22 25 08 10 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E 19:28:27 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00
E 19:28:27 SENSE SK Interpretation: Illegal Request
E 19:28:27 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List
I 19:28:27 [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 19:28:27 CDB: 55 10 00 00 00 00 00 00 3C 00
I 19:28:27 CDB Interpretation: Mode Select (10)
I 19:28:27 BUFFER: 00 00 00 00 00 00 00 00 05 32 02 25 08 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E 19:28:27 SENSE: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 00 00
E 19:28:27 SENSE SK Interpretation: Illegal Request
E 19:28:27 SENSE ASC/ASCQ Interpretation: Invalid Field in Parameter List
E 19:28:27 Failed to set Write Parameters!
E 19:28:27 Reason: Invalid Field in Parameter List

I hope can help and I apologize for my English

Thanks Carina

Edited by CariMDP, 20 April 2012 - 01:10 AM.

[CariMDP]

another thing I can not do is change the advanced setting of the drive and enable or disable this...

Smart Burn
Force Hyper Tunning
Over Speed Writing
Online Hyper Tuning

Edited by CariMDP, 20 April 2012 - 04:19 AM.

[Cynthia]

I 19:25:42 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x

Tried another write speed like 8x?

[CariMDP]

I tried at 4x, 6x and 8x and the same error

[Cynthia]

I 19:25:42 OPC: Yes

Tried a write/burn with that setting disabled?

[CariMDP]

yes i tried

I 01:53:18 ImgBurn Version 2.5.6.0 started!
I 01:53:18 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 01:53:18 Total Physical Memory: 3.397.816 KB - Available: 1.669.220 KB
I 01:53:19 Initialising SPTI...
I 01:53:19 Searching for SCSI / ATAPI devices...
I 01:53:19 -> Drive 1 - Info: ATAPI iHAS122 ZL0F (K:) (ATA)
I 01:53:19 -> Drive 2 - Info: ATAPI iHAS122 ZL0F (J:) (ATA)
I 01:53:19 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI)
I 01:53:19 Found 2 DVD±RW/RAMs and 1 BD-ROM/HD DVD-ROM!
I 01:56:46 Operation Started!
I 01:56:46 Source File: P:\Toy3.iso
I 01:56:46 Source File Sectors: 2.282.368 (MODE1/2048)
I 01:56:46 Source File Size: 4.674.289.664 bytes
I 01:56:46 Source File Volume Identifier: TOY3
I 01:56:46 Source File Volume Set Identifier: 3D65AEA70022D36F
I 01:56:46 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!
I 01:56:46 Source File Implementation Identifier: ImgBurn
I 01:56:46 Source File File System(s): ISO9660; UDF (1.02)
I 01:56:46 Destination Device: [2:1:0] ATAPI iHAS122 ZL0F (K:) (ATA)
I 01:56:46 Destination Media Type: DVD-R (Disc ID: MCC 03RG20)
I 01:56:46 Destination Media Supported Write Speeds: 4x; 6x; 8x; 12x; 16x; 18x; 20x
I 01:56:46 Destination Media Sectors: 2.298.496
I 01:56:46 Write Mode: DVD
I 01:56:46 Write Type: DAO
I 01:56:46 Write Speed: 8x
I 01:56:46 Link Size: Auto
I 01:56:46 Lock Volume: Yes
I 01:56:46 Test Mode: No
I 01:56:46 OPC: No
I 01:56:46 BURN-Proof: Enabled
I 01:56:46 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x)
I 01:56:46 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: Yes, SmartBurn: Yes
E 01:56:46 Failed to set Write Parameters!
E 01:56:46 Reason: Invalid Field in Parameter List

Advanced Settings - Force HT: No, Online HT: No, OverSpeed: Yes, SmartBurn: Yes

I can not change this from of the setting

[LIGHTNING UK!]

Why can't you change those advanced settings?

The first thing I'd do is take overspeed off.

Also, ensure you've done the simple things like *power cycle* the entire machine (not just reboot, actually turn it off and on again).

[CariMDP]

Why can't you change those advanced settings?

The first thing I'd do is take overspeed off.

Also, ensure you've done the simple things like *power cycle* the entire machine (not just reboot, actually turn it off and on again).

When I wanted to change's settings this error was

---------------------------
ImgBurn
---------------------------
Failed to Set Write Parameters!

Reason: Invalid Field in Parameter List
---------------------------
accept
---------------------------

Anyway, after many tests, I resolved the problem by changing sata cable from the recorder to the board

Thank you very much for your answers, they can close the topic ... I hope that this experience helps someone

[LIGHTNING UK!]

You wouldn't get that error if you're just trying to change the 'Advanced Settings', it's totally unrelated.

You need to bring up the 'Change Advanced Settings' window and that can be done in numerous ways....

1. Right click the drive drop down selection box and pick the option from the context menu.
2. Once you're in a mode where a drive is active (i.e. anything other than Ez-Mode Picker), click Tools -> Drive and find the option on that menu.
3. Press the 'Change Advanced Settings' button down the bottom right of the main window when in Write mode (plus some of the others).