Hi I'm still pretty new to all this but recently all of my DVDs have been failing to burn. The first time I did it, it worked just fine but now it always fails. Here is my ImgBurn Log. Just so you know I am using Verbatim DVD+R DL 2.4x discs.
I 12:47:10 ImgBurn Version 2.5.7.0 started!
I 12:47:10 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6002 : Service Pack 2)
I 12:47:10 Total Physical Memory: 4,191,740 KB - Available: 1,900,640 KB
I 12:47:10 Initialising SPTI...
I 12:47:10 Searching for SCSI / ATAPI devices...
I 12:47:10 -> Drive 1 - Info: Optiarc BD ROM BC-5500A 1.B4 (F:) (ATA)
I 12:47:10 Found 1 BD-ROM/DVD±RW!
I 12:47:42 Operation Started!
I 12:47:42 Source File: C:\Users\Eric\Documents\Aimersoft DVD Creator\MLPSE1DISC2.MDS
I 12:47:42 Source File Sectors: 4,142,560 (MODE1/2048)
I 12:47:42 Source File Size: 8,483,962,880 bytes
I 12:47:42 Source File Volume Identifier: MLPSE1DISC2
I 12:47:42 Source File Volume Set Identifier: 40DE5D03003F35D4
I 12:47:42 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER!
I 12:47:42 Source File Implementation Identifier: ImgBurn
I 12:47:42 Source File File System(s): ISO9660, UDF (1.02)
I 12:47:42 Destination Device: [1:0:0] Optiarc BD ROM BC-5500A 1.B4 (F:) (ATA)
I 12:47:42 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)
I 12:47:42 Destination Media Supported Write Speeds: 2.4x, 4x
I 12:47:42 Destination Media Sectors: 4,173,824
I 12:47:42 Write Mode: DVD
I 12:47:42 Write Type: DAO
I 12:47:42 Write Speed: 2.4x
I 12:47:42 DVD+R DL Reserve Track: No
I 12:47:42 Link Size: Auto
I 12:47:42 Lock Volume: Yes
I 12:47:42 Test Mode: No
I 12:47:42 OPC: No
I 12:47:42 BURN-Proof: Enabled
I 12:47:42 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 12:47:42 Book Type Setting: DVD-ROM
I 12:47:42 Optimal L0 Data Zone Capacity: 2,071,280
I 12:47:42 Optimal L0 Data Zone Method: Copied From Original Disc
I 12:48:08 Set L0 Data Zone Capacity Succeeded!
I 12:48:08 Filling Buffer... (80 MB)
I 12:48:10 Writing LeadIn...
I 12:48:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4142559)
I 12:48:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4142559)
I 12:48:11 Writing Layer 0... (LBA: 0 - 2071279)
I 13:09:03 Writing Layer 1... (LBA: 2071280 - 4142559)
W 13:10:06 Failed to Write Sectors 2073520 - 2073551 - Reason: No Seek Complete
W 13:10:06 Retrying (1 of 20)...
W 13:10:06 Retry Failed - Reason: Write Error
W 13:10:06 Retrying (2 of 20)...
W 13:10:06 Retry Failed - Reason: Write Error
W 13:10:06 Retrying (3 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (4 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (5 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (6 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (7 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (8 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (9 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (10 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (11 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (12 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (13 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (14 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (15 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (16 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (17 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (18 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (19 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
W 13:10:07 Retrying (20 of 20)...
W 13:10:07 Retry Failed - Reason: Write Error
E 13:10:41 Failed to Write Sectors 2073520 - 2073551 - Reason: No Seek Complete
I 13:10:42 Synchronising Cache...
W 13:10:46 User opted to skip the 'Close Track/Session/Disc' functions.
E 13:10:46 Failed to Write Image!
I 13:10:46 Exporting Graph Data...
I 13:10:46 Graph Data File: C:\Users\Eric\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_BD_ROM_BC-5500A_1.B4_JUNE-30-12_12-47_PM_MKM-001-00_2.4x.ibg
I 13:10:46 Export Successfully Completed!
E 13:10:46 Operation Failed! - Duration: 00:23:03
I 13:10:46 Average Write Rate: 3,071 KB/s (2.2x) - Maximum Write Rate: 5,372 KB/s (3.9x)
ImgBurn Write Error Help!
Started by
Garth02
, Jun 30 2012 08:29 PM
Forum Rules
Read the Guides forum if you don't know how to do something. 
If you have a question or a problem, check the FAQ and use the Search to see if you can find the answer for yourself. 
If you're having trouble burning double layer media, read Here.
Still stuck? Create a new thread and describe your issue in detail.
Make sure you include a copy of the program's log in your post. No log = 
6 replies to this topic
#2
LIGHTNING UK!
-
- Admin
-
- 25,638 posts
Author of ImgBurn
- Gender:Male
- Location:United Kingdom
Posted 30 June 2012 - 09:17 PM
Try at 4x?
Try cleaning the drive with a cleaning disc?
Try a disc from another spindle of discs? (Maybe MKM-003-00 instead of MKM-001-00)
Try cleaning the drive with a cleaning disc?
Try a disc from another spindle of discs? (Maybe MKM-003-00 instead of MKM-001-00)
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
#3
Garth02
-
- Members
-
- 4 posts
ISF Newbie
Posted 30 June 2012 - 09:37 PM
I tried burning a diffrent file at 4x and it worked currently trying the previoues file if it gets past 50% then hopefully everything will be fine
#4
Garth02
-
- Members
-
- 4 posts
ISF Newbie
Posted 30 June 2012 - 09:46 PM
I think it might be the iso itself cause it cant seem to break the 2nd layer on this specific file
#5
LIGHTNING UK!
-
- Admin
-
- 25,638 posts
Author of ImgBurn
- Gender:Male
- Location:United Kingdom
Posted 30 June 2012 - 09:50 PM
The drive doesn't know or care about what you're burning. If it errors out then it's due to a problem burning the media and nothing to do with the file.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
#6
Garth02
-
- Members
-
- 4 posts
ISF Newbie
Posted 01 July 2012 - 03:30 AM
Sorry its just that I find it weird you see. The ISO file I'm burning was from a custom DVD video I was making however the DVD burning software I was using could not make a layer break for the DL. So I saved the file as a ISO then use ImgBurn's build mode to find where I should put the layer break then use VobBlanker to create a layer break point then went back to ImgBurn to build the new ISO with the layer break. When I did it with the first disc of my set it worked fine, The second one I did not have the instructions up so I might have messed up when creating the layer break in VobBlanker (As it always messes up for me when its about to burn the next layer) I re-burn the first disc and there was no problems, I even created the third disc and there were no problems, its just that second ISO file I created that seems to always mess up(I've done the second one 7 times and it always stops at 50% just when its about to do the second layer).
#7
LIGHTNING UK!
-
- Admin
-
- 25,638 posts
Author of ImgBurn
- Gender:Male
- Location:United Kingdom
Posted 01 July 2012 - 08:14 AM
Maybe its to do with you burning more/less per layer... but it's nothing to do with the (contents of the) actual image.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
