Jump to content

ImgBurn Support Forum uses cookies. Read the Privacy Policy for more info. To remove this message, please click the button to the right:    I accept the use of cookies

Photo

My DVD burner won't SEE a blank dvd disk


Forum Rules

Read the Guides forum if you don't know how to do something. :readbook:
If you have a question or a problem, check the FAQ and use the Search to see if you can find the answer for yourself. :lightbulb:
If you're having trouble burning double layer media, read Here.
Still stuck? Create a new thread and describe your issue in detail.
Make sure you include a copy of the program's log in your post. No log = :chair:


  • Please log in to reply
24 replies to this topic

#1 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 28 April 2007 - 05:57 AM

I have recently begun having problems using my SonyDRU-710a. The drive will not acknowledge that a blank dvd disc has been inserted. I have updated the drive's firmware, I have searched for virus'. I have installed NEro's and Adaptec's ASPI and none of that has helped. I have tried 3 different brands of DVD + R medium, I have un-installed and re-installed the drive. Nothing has helped. The drive plays DVD commercial movies just fine.

So to double check the DVD media, I took a disc to my wife's fairly new Dell laptop and that too would not acknowledge that a blank disc had been inserted.
I have read a half dozen tech sites this past few days and none of the solutions have helped. One I haven't tried yet was to un-install IE 7 and WMP 11. Both of our machines are SP2 XP and have IE7 and WMP 11 installed.

I also have some gaming software that I 'thought' might have copy protection that was interfering with my drive, but since my wife's laptop does not have any Starforce or Sony CP on it...I guess that cannot be a cause.

here is my imgburn log.

I 22:50:05 ImgBurn Version 2.3.2.0 started!
I 22:50:05 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 22:50:05 Total Physical Memory: 1,310,192 KB - Available: 662,920 KB
I 22:50:06 Initialising SPTI...
I 22:50:06 Searching for SCSI / ATAPI devices...
I 22:50:06 Found 1 CD-RW and 1 DVD?RW!

#2 mmalves

mmalves

    resident n00b

  • Beta Team Members
  • PipPipPipPipPip
  • 7,094 posts
  • Gender:Male
  • Location:Itu - SP - Brazil

Posted 28 April 2007 - 06:08 AM

With ImgBurn in Write mode and a blank media inserted on your drive, could you copy and paste the information shown on the right side of ImgBurn's window?
Also, while you're at it, please go to Tools, then 'Filter Driver Load Order', click the Clipboard button and paste here.

By the way, do you have Alcohol 120% installed? If you have enabled its 'Ignore Media Type' function, it'll make every program think that your media is a DVD-ROM.

#3 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 27,241 posts
  • Gender:Male
  • Location:United Kingdom

Posted 28 April 2007 - 07:24 AM

The 3 brands might have all been the same media ID, hence not really any different at all.

If you load the program AND THEN insert the disc, does the message in the status bar change to 'Logical Unit in process of becoming ready', before then going back to 'medium not present' ?

It would certainly appear as though the drive just doesn't like those discs.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#4 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 28 April 2007 - 11:22 AM

The 3 brands might have all been the same media ID, hence not really any different at all.

If you load the program AND THEN insert the disc, does the message in the status bar change to 'Logical Unit in process of becoming ready', before then going back to 'medium not present' ?

It would certainly appear as though the drive just doesn't like those discs.


yes that is the message. But...when I opened and closed the drive this time...it sortof acknowledged the drive, at least it made an attempt to burn..here is the log.I 04:10:00 ImgBurn Version 2.3.2.0 started!
I 04:10:00 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 04:10:00 Total Physical Memory: 1,310,192 KB - Available: 526,340 KB
I 04:10:00 Initialising SPTI...
I 04:10:00 Searching for SCSI / ATAPI devices...
I 04:10:00 Found 1 CD-RW and 1 DVD?RW!
I 04:11:00 Operation Started!
I 04:11:00 Building Image Tree...
I 04:12:37 Checking Directory Depth...
I 04:12:37 Calculating Totals...
I 04:12:37 Preparing Image...
I 04:12:37 Checking Path Length...
I 04:12:37 Image Size: 1,121,288,192 bytes
I 04:12:37 Image Sectors: 547,504
I 04:12:44 Operation Successfully Completed! - Duration: 00:01:44
I 04:12:44 Operation Started!
I 04:12:44 Source File: -==/\/[BUILD IMAGE]\/\==-
I 04:12:44 Source File Sectors: 547,504 (MODE1/2048)
I 04:12:44 Source File Size: 1,121,288,192 bytes
I 04:12:44 Source File Volume Identifier: rFactor tracks
I 04:12:44 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER!
I 04:12:44 Source File Implementation Identifier: ImgBurn
I 04:12:44 Source File File System(s): ISO9660, UDF (1.02)
I 04:12:44 Destination Device: [1:0:0] SONY DVD RW DRU-710A BYX5 (E:) (ATA)
I 04:12:44 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 6x, 8x, 12x, 14x, 16x)
I 04:12:44 Destination Media Sectors: 2,295,104
I 04:12:44 Write Mode: DVD
I 04:12:44 Write Type: DAO
I 04:12:44 Write Speed: MAX
I 04:12:44 Link Size: Auto
I 04:12:44 Test Mode: No
I 04:12:44 BURN-Proof: Enabled
W 04:13:16 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied.
W 04:13:16 DeviceIoControl(FSCTL_DISMOUNT_VOLUME) Failed! - Reason: Access is denied.
I 04:13:16 Filling Buffer... (40 MB)
I 04:13:17 Writing LeadIn...
W 04:14:16 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 04:14:16 Retrying (1 of 20)...
W 04:14:19 Retry Failed - Power Calibration Area Error
W 04:14:19 Retrying (2 of 20)...
W 04:14:21 Retry Failed - Power Calibration Area Error
W 04:14:21 Retrying (3 of 20)...
W 04:14:24 Retry Failed - Power Calibration Area Error
W 04:14:24 Retrying (4 of 20)...
W 04:14:26 Retry Failed - Power Calibration Area Error
W 04:14:26 Retrying (5 of 20)...
W 04:14:29 Retry Failed - Power Calibration Area Error
W 04:14:29 Retrying (6 of 20)...
W 04:14:31 Retry Failed - Power Calibration Area Error
W 04:14:31 Retrying (7 of 20)...
W 04:14:34 Retry Failed - Power Calibration Area Error
W 04:14:34 Retrying (8 of 20)...
W 04:14:37 Retry Failed - Power Calibration Area Error
W 04:14:37 Retrying (9 of 20)...
W 04:14:39 Retry Failed - Power Calibration Area Error
W 04:14:39 Retrying (10 of 20)...
W 04:14:42 Retry Failed - Power Calibration Area Error
W 04:14:42 Retrying (11 of 20)...
W 04:14:44 Retry Failed - Power Calibration Area Error
W 04:14:44 Retrying (12 of 20)...
W 04:14:47 Retry Failed - Power Calibration Area Error
W 04:14:47 Retrying (13 of 20)...
W 04:14:50 Retry Failed - Power Calibration Area Error
W 04:14:50 Retrying (14 of 20)...
W 04:14:52 Retry Failed - Power Calibration Area Error
W 04:14:52 Retrying (15 of 20)...
W 04:14:55 Retry Failed - Power Calibration Area Error
W 04:14:55 Retrying (16 of 20)...
W 04:14:57 Retry Failed - Power Calibration Area Error
W 04:14:57 Retrying (17 of 20)...
W 04:15:56 Retry Failed - Power Calibration Area Error
W 04:15:56 Retrying (18 of 20)...
W 04:15:58 Retry Failed - Power Calibration Area Error
W 04:15:58 Retrying (19 of 20)...
W 04:16:01 Retry Failed - Power Calibration Area Error
W 04:16:01 Retrying (20 of 20)...
W 04:16:04 Retry Failed - Power Calibration Area Error
W 04:16:16 Retrying (21)...
W 04:16:18 Retry Failed - Power Calibration Area Error
E 04:16:21 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 04:16:21 Synchronising Cache...
I 04:16:22 Closing Track...
I 04:16:23 Finalising Disc...
E 04:16:24 Failed to Write Image!
E 04:16:24 Operation Failed! - Duration: 00:03:39
I 04:16:24 Average Write Rate: N/A - Maximum Write Rate: N/A



and here is the first part of the infor requested in the previous post.
the window on the right was greyed out, it did list the Sony DRU-710a with the latest bios Byx5 and then drive N/A

but that changed to the following after re-inserting the disc.


and finally back to the window on the right after that failed attempt, it can id the disc.

SONY DVD RW DRU-710A BYX5 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 2,295,104
Free Space: 4,700,372,992 bytes
Free Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 4x, 6x, 8x, 12x, 14x, 16x

Physical Format Information (ADIP):
Disc ID: CMC MAG-M01-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: CMC MAG-M01-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0





here too is the first filter report

===============================================
Filter Driver Load Order - ImgBurn v2.3.2.0
===============================================

Upper Device Filter: redbook
Upper Class Filter: [None Found]
Device: CD/DVD-ROM Device
Lower Class Filter: [None Found]
Lower Device Filter: imapi

Filter Name: redbook
File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
File Description: Redbook Audio Filter Driver
Product Name: Microsoft? Windows? Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: ? Microsoft Corporation. All rights reserved.

Filter Name: imapi
File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
File Description: IMAPI Kernel Driver
Product Name: Microsoft? Windows? Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: ? Microsoft Corporation. All rights reserved.

#5 dontasciime

dontasciime

    Mood : Forgetfu

  • Beta Team Members
  • PipPipPipPipPip
  • 5,223 posts
  • Location:9.99

Posted 28 April 2007 - 11:58 AM

Your drive does not like that media.

Hardly any drives like that particular media.

#6 chewy

chewy

    ISF God

  • Beta Team Members
  • PipPipPipPipPip
  • 1,411 posts

Posted 28 April 2007 - 12:09 PM

that old drive's firmware is almost 2 years old, but supports that mid code


try some better disks or one from another part of the spindle, crosscheck against the laptop

Edited by chewy, 28 April 2007 - 12:10 PM.

Posted Image

#7 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 29 April 2007 - 05:14 AM

[quote name='Dave Henrie' date='Apr 28 2007, 04:22 AM' post='45241']
[quote name='LIGHTNING UK!' post='45229' date='Apr 28 2007, 12:24 AM']The 3 brands might have all been the same media ID, hence not really any different at all.
dang, just tried some Verbatim -R discs. no change. this looks bad

#8 Shamus_McFartfinger

Shamus_McFartfinger

    Complete and utter Bastard

  • Beta Team Members
  • PipPipPipPipPip
  • 2,685 posts
  • Gender:Male
  • Location:Brisbane, Australia
  • Interests:Wombat whipping

Posted 29 April 2007 - 11:20 AM

Please post your log file.
Posted Image


This software has not been tested on animals and is certified dolphin free.

If you use this program regularly, consider buying the author a beer and click the link below.


Donate

#9 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 29 April 2007 - 04:11 PM

Please post your log file.


several logs listed above. about the 4th message, my second, in the thread. I have only gotten the drive to 'see' the disc once this past week. And that wasn't enough to get to the burn process. I got a Power Calibration Error that time. Every other time, the message at the bottom of the IMGburn display was Media Not Present.

Tried Verbatium, TDK, two different Generiics, The Verbatium disc was -R the rest were +R. I may have to admit defeat.
Un-installed IE7 and WMP11 as well.

dh

#10 dontasciime

dontasciime

    Mood : Forgetfu

  • Beta Team Members
  • PipPipPipPipPip
  • 5,223 posts
  • Location:9.99

Posted 29 April 2007 - 04:12 PM

you got a log from using the verbatim ones though

#11 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 29 April 2007 - 05:00 PM

you got a log from using the verbatim ones though



oh sorry, not much of a log appears since the status line still indicates: "device not ready: Medium not present."

here is what there is of the log with a Verb disc in the drive.

I 09:58:32 ImgBurn Version 2.3.2.0 started!
I 09:58:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 09:58:32 Total Physical Memory: 1,310,192 KB - Available: 678,160 KB
I 09:58:32 Initialising SPTI...
I 09:58:32 Searching for SCSI / ATAPI devices...
I 09:58:53 Found 1 CD-RW and 1 DVD?RW!

I did get a fairly long NERO log, but that won't be much help here. And the error portion only came near the end of the log.
dh

#12 dontasciime

dontasciime

    Mood : Forgetfu

  • Beta Team Members
  • PipPipPipPipPip
  • 5,223 posts
  • Location:9.99

Posted 29 April 2007 - 05:04 PM

just trying to see what the media code is for those verbs

#13 volvofl10

volvofl10

    LIVE from Italia...ciao bella, Forza Ferrari

  • Beta Team Members
  • PipPipPipPipPip
  • 1,776 posts

Posted 29 April 2007 - 06:27 PM

W 04:13:16 DeviceIoControl(FSCTL_LOCK_VOLUME) Failed! - Reason: Access is denied.
W 04:13:16 DeviceIoControl(FSCTL_DISMOUNT_VOLUME) Failed! - Reason: Access is denied.


check out THIS from the FAQ page . make note of the bit about seeing what else has a handle on the drive................see if that helps
Dont be a cheapskate and buy poor quality media ,

FOR Dual layer discs use genuine Verbatims and nothing else , read this thread by LUK to see why Verbatim Dual layer DV9 thread

FOR Single layer DV5 use genuine Taiyo Yuden media everytime , ONLY TY's and not some other brand with TY dye/ink

DONT ask how to copy protected discs
DONT ask who LIGHTNING_UK is .......we only know him as .................."The Stig"

#14 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 29 April 2007 - 11:26 PM

just trying to see what the media code is for those verbs

This is cut from the Nero log, I'm 99% this was the TDK media and not Verbatium...I don't think I've gotten a Verb to load yet...Will keep trying...
This may or may not make sense, since it IS from another product.

dh

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
[04:28:59] DVDEngine Book Type: DVD+R (10), Part Version: 1.0x (1)
[04:28:59] DVDEngine Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
[04:28:59] DVDEngine Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
[04:28:59] DVDEngine Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
[04:28:59] DVDEngine Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
[04:28:59] DVDEngine End Physical Sector Number of Data Area: 26053F h
[04:28:59] DVDEngine End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
[04:28:59] DVDEngine Data in Burst Cutting Area (BCA) does not exist
[04:28:59] DVDEngine Disc Application Code: 0 / 0 h
[04:28:59] DVDEngine Extended Information indicators: 7 h
[04:28:59] DVDEngine Disc Manufacturer ID: CMC.MAG.
[04:28:59] DVDEngine Media type ID: M01
[04:28:59] DVDEngine Product revision number: 0
[04:28:59] DVDEngine Number of Physical format information bytes in use in ADIP up to byte 63: 56
[04:28:59] DVDEngine Media Specific [16..63]:
[04:28:59] DVDEngine 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
[04:28:59] DVDEngine 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
[04:28:59] DVDEngine 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00

#15 Shamus_McFartfinger

Shamus_McFartfinger

    Complete and utter Bastard

  • Beta Team Members
  • PipPipPipPipPip
  • 2,685 posts
  • Gender:Male
  • Location:Brisbane, Australia
  • Interests:Wombat whipping

Posted 30 April 2007 - 05:38 PM

[04:28:59] DVDEngine Disc Manufacturer ID: CMC.MAG.


Yep. We'll need a log showing failures with the Verbatim media when you get one. In the meantime, toss these CMC disks into the bin. They aren't worth the frustration, time or effort to bother using. They are that bad.
Posted Image


This software has not been tested on animals and is certified dolphin free.

If you use this program regularly, consider buying the author a beer and click the link below.


Donate

#16 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 30 April 2007 - 10:09 PM

[04:28:59] DVDEngine Disc Manufacturer ID: CMC.MAG.


Yep. We'll need a log showing failures with the Verbatim media when you get one. In the meantime, toss these CMC disks into the bin. They aren't worth the frustration, time or effort to bother using. They are that bad.

Well for what it is worth, my son recently installed a newer Sony DVD the DRU 830 and when I put the verbatium disc in that with nero 7(all he had on his box) the disc was recognized and the burning process took off perfectly. I guess...I'll have to swallow hard and accept that even tho the hours on this drive fall far far far far short of the MTF, this drive is toast. I may keep it around as a player at least and a cdburner....grmble grumble....gnash...gnash...

Thanks everyone

Dave Henrie

#17 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 01 May 2007 - 05:56 AM

Whoo hoo MAYBEE! I un-installed a ton of old software, including all the nero and incd stuff. And suddenly imgburn reports the drive is ready...
Cross your fingers here goes...
dh

SONY DVD RW DRU-710A BYX5 (ATA)
Current Profile: DVD-R

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 2,297,888
Free Space: 4,706,074,624 bytes
Free Time: 510:40:38 (MM:SS:FF)
Supported Write Speeds: 4x, 6x, 8x

Pre-recorded Information:
Manufacturer ID: MCC 02RG20

Physical Format Information (Last Recorded):
Book Type: DVD-R
Part Version: 5
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 0
Last Physical Sector in Layer 0: 0

#18 Dave Henrie

Dave Henrie

    ISF Newbie

  • Members
  • Pip
  • 12 posts

Posted 01 May 2007 - 06:01 AM

ratzo! didn't happen...power calibration error 20 times. At least tho...I got a log out of it...
I 22:53:09 ImgBurn Version 2.3.2.0 started!
I 22:53:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 22:53:09 Total Physical Memory: 1,310,192 KB - Available: 743,572 KB
I 22:53:09 Initialising SPTI...
I 22:53:09 Searching for SCSI / ATAPI devices...
I 22:53:09 Found 1 DVD?RW!
I 22:57:08 Operation Started!
I 22:57:08 Source File: G:\rFactor tracks\LMS_2007_Rnd01_Monza_Pt1.avi
I 22:57:08 Source File Sectors: 547,227 (MODE1/2048)
I 22:57:08 Source File Size: 1,120,720,896 bytes
I 22:57:08 Source File File System(s): None
I 22:57:08 Destination Device: [2:0:0] SONY DVD RW DRU-710A BYX5 (E:) (ATA)
I 22:57:08 Destination Media Type: DVD-R (Disc ID: MCC 02RG20) (Speeds: 4x, 6x, 8x)
I 22:57:08 Destination Media Sectors: 2,297,888
I 22:57:08 Write Mode: DVD
I 22:57:09 Write Type: DAO
I 22:57:09 Write Speed: MAX
I 22:57:09 Link Size: Auto
I 22:57:09 Test Mode: No
I 22:57:09 BURN-Proof: Enabled
I 22:57:09 Filling Buffer... (40 MB)
I 22:57:10 Writing LeadIn...
W 22:58:06 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 22:58:06 Retrying (1 of 20)...
W 22:58:09 Retry Failed - Power Calibration Area Error
W 22:58:09 Retrying (2 of 20)...
W 22:58:11 Retry Failed - Power Calibration Area Error
W 22:58:11 Retrying (3 of 20)...
W 22:58:14 Retry Failed - Power Calibration Area Error
W 22:58:14 Retrying (4 of 20)...
W 22:58:16 Retry Failed - Power Calibration Area Error
W 22:58:16 Retrying (5 of 20)...
W 22:58:19 Retry Failed - Power Calibration Area Error
W 22:58:19 Retrying (6 of 20)...
W 22:58:21 Retry Failed - Power Calibration Area Error
W 22:58:21 Retrying (7 of 20)...
W 22:58:24 Retry Failed - Power Calibration Area Error
W 22:58:24 Retrying (8 of 20)...
W 22:58:27 Retry Failed - Power Calibration Area Error
W 22:58:27 Retrying (9 of 20)...
W 22:58:34 Retry Failed - Power Calibration Area Error
W 22:58:34 Retrying (10 of 20)...
W 22:59:30 Retry Failed - Power Calibration Area Error
W 22:59:30 Retrying (11 of 20)...
W 22:59:33 Retry Failed - Power Calibration Area Error
W 22:59:33 Retrying (12 of 20)...
W 22:59:35 Retry Failed - Power Calibration Area Error
W 22:59:35 Retrying (13 of 20)...
W 22:59:38 Retry Failed - Power Calibration Area Error
W 22:59:38 Retrying (14 of 20)...
W 22:59:40 Retry Failed - Power Calibration Area Error
W 22:59:40 Retrying (15 of 20)...
W 22:59:43 Retry Failed - Power Calibration Area Error
W 22:59:43 Retrying (16 of 20)...
W 22:59:45 Retry Failed - Power Calibration Area Error
W 22:59:45 Retrying (17 of 20)...
W 22:59:48 Retry Failed - Power Calibration Area Error
W 22:59:48 Retrying (18 of 20)...
W 22:59:51 Retry Failed - Power Calibration Area Error
W 22:59:51 Retrying (19 of 20)...
W 22:59:53 Retry Failed - Power Calibration Area Error
W 22:59:53 Retrying (20 of 20)...
W 22:59:56 Retry Failed - Power Calibration Area Error
E 23:00:00 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 23:00:00 Synchronising Cache...
E 23:00:01 Failed to Write Image!
E 23:00:01 Operation Failed! - Duration: 00:02:52
I 23:00:01 Average Write Rate: N/A - Maximum Write Rate: N/A

#19 Shamus_McFartfinger

Shamus_McFartfinger

    Complete and utter Bastard

  • Beta Team Members
  • PipPipPipPipPip
  • 2,685 posts
  • Gender:Male
  • Location:Brisbane, Australia
  • Interests:Wombat whipping

Posted 01 May 2007 - 07:41 AM

Humour me and slow your burn down to 4x and see what happens.
Posted Image


This software has not been tested on animals and is certified dolphin free.

If you use this program regularly, consider buying the author a beer and click the link below.


Donate

#20 blutach

blutach

    Not quite as big a bastard as Shamus. Hoping to improve

  • Beta Team Members
  • PipPipPipPipPip
  • 5,233 posts
  • Gender:Male
  • Location:Melbourne, Australia
  • Interests:DVDs, Chess

Posted 01 May 2007 - 08:49 AM

Drive might be going west though.

Regards





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users