I keep getting the Device Not ready ID CRC or ECC ERROR. I can shrink a dvd fine with dvd shrink but am unable to burn it w/ this program or with dvd decrypter and RecordNow! In the past i've burned many dvd's with no issue and all of a sudden it does not recognize the empty dvd's. I can still make a ISO file and watch dvd's. I've read the FAQ and previous posts and have tried various solutions but nothing works. I've bought better media(Taiyo Yuden-16x), uninstalled driver than rebooted, uninstalled IMGburn and reinstall. Played around w/ settings. I have also tried to find an updated driver but have been unsuccesfull in installing it. I have a Matshita DVD-RAM UJ-831S 1.40 (ATA)
This is the link to a updated driver but as mentioned I cannot install it, I keep getting an error mssg. http://forum.rpc1.org/dl_firmware.php?download_id=1986
I have a Toshiba Sattelite M-45 laptop w/ expired warranty.
I 01:29:48 ImgBurn Version 2.4.0.0 started!
I 01:29:48 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 01:29:48 Total Physical Memory: 515,500 KB - Available: 138,092 KB
I 01:29:49 Initialising SPTI...
I 01:29:49 Searching for SCSI / ATAPI devices...
I 01:29:50 Found 1 DVD±RW/RAM!
Please help!
Device Not ready ID CRC or ECC ERROR
Started by
michaelb
, Feb 26 2008 07:56 AM
Forum Rules
Read the Guides forum if you don't know how to do something. 
If you have a question or a problem, check the FAQ and use the Search to see if you can find the answer for yourself. 
If you're having trouble burning double layer media, read Here.
Still stuck? Create a new thread and describe your issue in detail.
Make sure you include a copy of the program's log in your post. No log = 
7 replies to this topic
#2
dontasciime
-
- Beta Team Members
-
- 5,223 posts
Mood : Forgetfu
- Location:£9.99
Posted 26 February 2008 - 10:20 AM
post the full log please
#3
LIGHTNING UK!
-
- Admin
-
- 27,241 posts
Author of ImgBurn
- Gender:Male
- Location:United Kingdom
Posted 26 February 2008 - 10:27 AM
If you haven't already tried cleaning the drive, do that.
Otherwise it's probably just faulty. See if you can get a replacement or buy an external one.
Otherwise it's probably just faulty. See if you can get a replacement or buy an external one.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
#4
michaelb
-
- New Members
-
- 3 posts
ISF Newbie
Posted 26 February 2008 - 03:44 PM
That was the full log,I think, when using a TY dvd. Nothing except make of burner shows up in screen and in view-log this shows up:
I 09:38:10 ImgBurn Version 2.4.0.0 started!
I 09:38:10 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 09:38:10 Total Physical Memory: 515,500 KB - Available: 129,912 KB
I 09:38:10 Initialising SPTI...
I 09:38:10 Searching for SCSI / ATAPI devices...
I 09:38:10 Found 1 DVD±RW/RAM!
With a device not ready Id crc or ecc error.
When using a lesser medium Ritek this shows up on screen:
MATSHITA DVD-RAM UJ-831S 1.40 (ATA)
Current Profile: DVD-R
Disc Information:
Status: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 2,297,888
Free Space: 4,706,074,624 bytes
Free Time: 510:40:38 (MM:SS:FF)
Supported Write Speeds: 2x
Pre-recorded Information:
Manufacturer ID: RITEKF1
Physical Format Information (Last Recorded):
Disc ID: 0@P-!-00
Book Type: DVD-R
Part Version: 5
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 196,608
Last Physical Sector in Layer 0: 0
With a disc not empty mssg. Same Log in View log
I 09:38:10 ImgBurn Version 2.4.0.0 started!
I 09:38:10 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 09:38:10 Total Physical Memory: 515,500 KB - Available: 129,912 KB
I 09:38:10 Initialising SPTI...
I 09:38:10 Searching for SCSI / ATAPI devices...
I 09:38:10 Found 1 DVD±RW/RAM!
With a device not ready Id crc or ecc error.
When using a lesser medium Ritek this shows up on screen:
MATSHITA DVD-RAM UJ-831S 1.40 (ATA)
Current Profile: DVD-R
Disc Information:
Status: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 2,297,888
Free Space: 4,706,074,624 bytes
Free Time: 510:40:38 (MM:SS:FF)
Supported Write Speeds: 2x
Pre-recorded Information:
Manufacturer ID: RITEKF1
Physical Format Information (Last Recorded):
Disc ID: 0@P-!-00
Book Type: DVD-R
Part Version: 5
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 196,608
Last Physical Sector in Layer 0: 0
With a disc not empty mssg. Same Log in View log
#5
michaelb
-
- New Members
-
- 3 posts
ISF Newbie
Posted 26 February 2008 - 03:47 PM
What is the best way to clean the drive? disc cleaner or airspray can? Any preference in brand?
#6
LIGHTNING UK!
-
- Admin
-
- 27,241 posts
Author of ImgBurn
- Gender:Male
- Location:United Kingdom
Posted 26 February 2008 - 04:00 PM
Yeah one of those cleaning discs will do. They normally have a brush or two on them that runs over the laser when you play a certain track.
Something like white spirit on a cotton wool dumbbell thingy might work too - assuming you're careful! Just wipe it over the laser and then dry it with the other end.
Something like white spirit on a cotton wool dumbbell thingy might work too - assuming you're careful! Just wipe it over the laser and then dry it with the other end.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
Replies to posts belong in the forum where everyone can read them. Please don't PM them.
In fact, don't PM me at all unless it's something I've asked to be told about!
Before asking questions, search the forum to see if someone else already has.
Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!
#7
AceH
-
- New Members
-
- 2 posts
ISF Newbie
Posted 30 March 2008 - 01:34 AM
I just started having the same problem "Device Not ready ID CRC or ECC ERROR". I too have the Toshiba Satellite M45 laptop.
Was this issue resolved by a cleaning disc?
Was this issue resolved by a cleaning disc?
#8
AceH
-
- New Members
-
- 2 posts
ISF Newbie
Posted 31 March 2008 - 01:57 AM
I purchased a DVD/CD cleaner (disc type with brushes on it) and that took care of my problem so far.I just started having the same problem "Device Not ready ID CRC or ECC ERROR". I too have the Toshiba Satellite M45 laptop.
Was this issue resolved by a cleaning disc?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
