rosanna
-
Posts
63 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by rosanna
-
-
8 hours ago, dbminter said:
There should be nothing preventing ImgBurn from making a copy of the disc, physically.
The best thing to do is just try to make a copy. If it doesn't work, the worst you're out is some time and one CD-R. If you're worried about wasting a single CD-R, you can always try copying to a CD-RW first.
Hi
I know many users can rip it with foobar2000 and i guess with isobuster
maybe using a blue ray burner or dvd burner and not a cd
i guess the sacd is a dvd ,isn't it
thanks
-
Hi
I have bought Wish You Were Here Spec.Ltd.Edt.Sacd, CD / SACD hybrid, SACD on Amazon for 160€
Might I ask if I could make a copy of it with imgburn (in my nation in Europe I can have and keep a copy of my original cd ) ?
any suggestion about imgburn settings ?
thanks
information about the sacd
Content: Stereo/Multichannel Media: Hybrid Recording type: Recording info: 5.1 surround mix by James Guthrie Assistant engineer Joel Plante Mastered by James Guthrie and Joel Plante Mixed and mastered at das boot recording DSD authoring for SACD by Gus Skinas
-
38 minutes ago, ThaCrip said:
I always keep all of my music in FLAC format and if I need to burn with ImgBurn, like burning a standard audio CD (or overburning a standard audio CD), ill just temporarily convert to WAV files (using Foobar2000) for use with ImgBurn.
I run ImgBurn on Linux as the method above works well since you just install ImgBurn and it will work with the above WAV files for standard audio CD burning by default with no conversion needed in ImgBurn itself basically.
I would generally avoid burning standard audio CD's from lossy formats like MP3/AAC etc.
but since ImgBurn has not been updated since the year 2013, I would say it's unlikely it will be updated at this point. but ImgBurn works quite well already for general data burning. it's audio CD burning works well enough to if you know how to work within it's limitations.
Hi
well , i have read on the forum , there will be an update
yes imgburn work very well ,but on some new drivers and dvd/cd ,imgburn can't set correctly the burn speed
and decompress with FFmpeg Library will be easy
for what i got it , you use imgburn for data but not for audio , may i know what software do you use to burn audio cd?
thanks
-
hi
could be added the support of FFmpeg Library , it's used by many software like audacity and others
it can read and decompress flac , ape, ACC , mp3 and so on , I guess all of them
so Imgburn could burn an audio cd from any type of media audio file
thanks
best regards
-
Hi
under I/O interface , i can select SPTI and aspi WNASPI32.dll if copy the dll inside the program
to use elbycdio and patin couffin ,is enough to copy the drivers inside the main program or do i need the program installed?
and the 2 drivers are still available to download?
thanks
best regards
-
Raw mode doesn't even apply to DVDs, nor ISO image.
hi
sorry i wanted to say cd , the freeware can burn only cd i raw
The RAW writing mode for DVDs was never made due to a copyright lawhi ,this works for every nation , i mean develop a software that burn dvd in raw?
i remember a software that had to move in another nation to continue to live
thanks
-
Mine was the result of a root kit. I had just installed ImgBurn on a new PC I was setting up in 2011 and got that message. I had just started the application, nothing inserted in the drive, and ImgBurn couldn't detect any drives because the maximum number of secrets had been reached. So, I posted about it and you recommended I do a scan for root kits, which I had one pre-installed with the PC. After removing it, ImgBurn detected drives fine.
Microsoft's definition of a secret is "A secret is an encrypted piece of information, such as a password or user name." It says if you receive that error message to contact the supplier of the application returning it. So, there is no real general definition of a secret. Secrets vary depending on the application.
A little further digging says the reason there is a finite cap on secrets is something imposed by the US government. It's a standard Windows error message. However, why this message would pop up on systems outside of America would be beyond me. So, I'm inclined to slightly doubt the statement they're imposed by the US government as a possible conspiracy theory.
hi
may i know from where does it come this warning ?
i mean have you a screenshot or can you post from where does it come /appear?
something like Maximum number of secrets has been reachedand may i ask you about
and ImgBurn couldn't detect any drives because the maximum number of secrets had been reached. So, I posted about it and you recommended I do a scan for root kitswhat rookkit have you used?
well it's off topic but avast does consider this forum "pishing"
i wanted to report here and i have reported to avast ,just because it's a false alarm
thanks
-
+1
RAW Mode for burning CDs would be awesome indeed.
I've been using CDRWin for years and since I changed my drive, the "RAW" option has become greyed-out in CDRWin.
I suspect because support for drives newer than 2010 has just never been implemented in this soft (which is now dead )
Looking for a solution, I found Alcohol 120% does support RAW mode for my drive and it works just fine.
But I'm otherwise _really_ not a fan of Alcohol and certainly wished I could do the same in ImgBurn instead and ditch Alcohol (lol).
I hope LIGHTNING would reconsider a RAW option for Write Mode (at least for CDs!).
hi
i wanted to burn a dvd iso in raw mode and sadly imgburn my favorite can't do it
so i have used CARBON CD 1.0.2 , it's free and portable
hope it can help you
cheers
-
I can verify the steps for installing the FLAC encoder work. After LUK told me where they were.
hi
do you mean the link in #5?
thanks
-
ImgBurn doesn't do any internal decoding at all.
Everything is handled by the OS, either via DirectShow or ACM.
I have no plans for doing any internal decoding.
It literally takes 2 minutes to install the system-wide DirectShow filters and then it'll automatically work within ImgBurn.
hi
ok , thanks for the answer
there is a list of directshow and acm decoder
but should i install all of them to use all of them , or is there a pack that can support all of them
in short is better install the codec seperatly or a pack
about APE - Monkey's Audio , there is not a separate directshow or acm but the program
and by the way are they safe? i mean no virus
thanks
best regards
-
It supports whatever DirectShow supports.
Installed the DirectShow decoders (as per the AudioCD guide) and you'll be good to go.
hi
imgburn is a real gem , just a question , is hard to add decoders seeing imgburn was updated in 2013 or add new feautes
honestly it's the best burn software
take care and thanks for the answer
-
Hi
i really love imgburn , but sometime i have to burn audio cd
and mostly audio files are flac , mp4 or opus
there are open source decoders , would be amazing if imgburn could burn audio cd from several audio source and not only from mp3
thanks
-
The flags available for use when burning a CUE are as follows...
4CH = 4 Channel
DCP = Digital Copy Permitted
PRE = Pre-Emphasis
These flags apply at track level, so the 'FLAGS' command should follow the TRACK they apply to.
i.e.
TRACK 01 AUDIO
FLAGS DCP
INDEX 01 00:00:00
If you want DCP, and PRE, just use 'FLAGS DCP PRE'.
hi
just a silly question , as I understood imgburn can burn all the flags
but do they dvd or blue ray burners really write these flags ?
thanks
-
The flags available for use when burning a CUE are as follows...
4CH = 4 Channel
DCP = Digital Copy Permitted
PRE = Pre-Emphasis
These flags apply at track level, so the 'FLAGS' command should follow the TRACK they apply to.
i.e.
TRACK 01 AUDIO
FLAGS DCP
INDEX 01 00:00:00
If you want DCP, and PRE, just use 'FLAGS DCP PRE'.
hi
thanks
i would like to bookmark this
i will test it and post it
thanks again really appreciate it a lot
-
Nobody deleted it, it was never there to begin with.
What you need to do is find out exactly what your playback device (i.e. your car stereo) requires.
Maybe there are posts on other forums about burning discs for playback in a BMW cd player? If it's fussy, I'm sure there will be.
At this moment in time, I have no advice/tips to give you.
hi
i will try again using imgburn slow speed burn+verify operations and i will add ISRC, EAN/UPC & pre-emphasis to the cue
may i ask a question is there a way to add "copy protection" flag to the cue?
the only cd that work are burned with nero 6 or 7 or 8 , and if i'm remember right it flags songs when i ripped with this flag
thanks
ps i will never use nero again
-
You didn't post a question in your first post, I just replied based on the title of the topic.
Please post the log from the burn+verify operations.
hi
somebody has delete my question #1
well i wanted to ask a question
i can 't play my burnded cd on my original bmw cd player
i have tried to burn at the slower speed and i have used several cd brands
i would like to know if there are some tips to edit imgburn to burn an audio cd and play on my audio car player
i don't like nero (it was a old nero version i guess 8 or 9 ) and i don't want to use anymore ,but a verbatim cd burned with nero worked , i guess maybe because nero added the "copy protection" flag and other flags like ISRC, EAN/UPC & pre-emphasis
i have tried anyburn but it doesn't work too
imgburn audio cd work great everywhere outside some car original cd player
my question is if there some tips to burn an audio cd , a compilation and test it with this settings or tips
thanks
-
Is this a one off or have you never managed to play a burnt disc in it?
hi
i have burned with nero and it worked with verbatin
i would like to burn with imgburn
by the way is there a cue sheet editor free?
ps i can read my question ? why?
thanks
-
-
hi
can imgburn copy DTS Music Disc ?
do i need a ripper to grab the audio or can i use imgburn to copy the disk ?
should i enable some settings ? i mean for write an image to disk , and burn an image
thanks
-
Drag the folder over holding the video_ts folder and you're done. If IMGBurn asks you to make certain corrections, let it. But pretty sure there are tutorials, might want to check the tutorials section ;-)
hi
ok
but i want to burn mp4 video or other format , i guess i need to tool to convert them
No, you don't. Just export from Adobe Media Encoder or directly from Premiere Pro to MP4 or whatever you want.
You only need Encore to make a DVD compliant file, in which case you would export as DVD mpeg-2 and then bring it into Encore to author it.
hi
thanks Peru
should i fnd an encore alternative , because under w10 is no stable
-
Drag the folder over holding the video_ts folder and you're done. If IMGBurn asks you to make certain corrections, let it. But pretty sure there are tutorials, might want to check the tutorials section ;-)
hi
ok
but i want to burn mp4 video or other format , i guess i need to tool to convert them
-
Yup
hi
is there a tutorial ?
after i have rendered my video , how can i burn on dvd and play it ?
-
Hi
i have a premiere & encoder cc 2015 subscription for 1 year
to burn my video ,i should use encore (not update still @ cs6 )
i don't want to use encore
may i use my favorite burn with my favorite program imgburn my video (dvd or blue ray) ?
thanks
-
No, you'd have to split the files up yourself.
hi , could be added this feature in the next release?
thanks
can I copy my own personal SACD ?
in ImgBurn Support
Posted
Hi
i guess i need a special reader like sony or oppo (there is a list of equipment ) to rip and copy correctly
after i can burn with imgburn , i guess the problem is that the blue ray/dvd burners for pc are not able to read the sacd layer with 4 or 5 channels
that's a pitty i spent 160€ for this cd 😒
thanks