paulusss

Thanks a lot!!! Installed 1693S.KC4B.patched-cf and just burned 1 succesfull Cheers!

Hi all, I just attached my SONY DVD RW DRU-800A KY06 (E:) (ATA), but getting only faillures right at the beginning of the burn process(using Verbatim +R DL 8x). I updated my firmware and my bios sees the Sony DRU burner as IDE.. This is the error message from imgburn: ImgBurn --------------------------- I/O Error! Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 31 00 00 00 20 00 Interpretation: Write (10) - Sectors: 12544 - 12575 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 Interpretation: Invalid Address For Write --------------------------- Retry Cancel ---------- It seems that the burn-speed doesnt even get to 2.4x speed.. it goes till somewhere between 1.2 - 1.5x and then it stoppes and i get this errorpopup. Plss help me out, i toasted 5 DL's already. If this keeps up, i am broke be4 tomorrow Thanks in advance!! ps. i use 'Sectors in L0' user specified nr: 1913760 ps2. dont know if it contains any usefull info, but to be sure i'll attach the following: ------------ SONY DVD RW DRU-800A KY06 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 3,827,520 Free Space: 7,838,760,960 bytes Free Time: 850:35:45 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2.4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,913,760 Changeable: No Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,110,367 Physical Format Information (Last Recorded - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,110,367 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 3,324 KB/s (2.4x) - WS: 3,324 KB/s (2.4x) ------- ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Wednesday, 31 March 2010, 16:55:17 ; \\****************************************// ; ; I 16:19:28 ImgBurn Version 2.5.1.0 started! I 16:19:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 16:19:28 Total Physical Memory: 3,406,892 KB - Available: 2,733,932 KB W 16:19:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:19:28 Initialising SPTI... I 16:19:28 Searching for SCSI / ATAPI devices... I 16:19:28 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA) I 16:19:28 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA) I 16:19:28 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI) I 16:19:28 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM! I 16:21:46 Operation Started! I 16:21:46 Source File: C:\Documents and Settings\Paul\Desktop\fable2backup.dvd I 16:21:46 Source File Sectors: 3,825,924 (MODE1/2048) I 16:21:46 Source File Size: 7,835,492,352 bytes I 16:21:46 Source File Volume Identifier: XGD2DVD_NTSC I 16:21:46 Source File Volume Set Identifier: 34672923 I 16:21:46 Source File Implementation Identifier: Sonic Scenarist 3.1 I 16:21:46 Source File File System(s): ISO9660, UDF (1.02) I 16:21:46 Destination Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA) I 16:21:46 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x) I 16:21:46 Destination Media Sectors: 4,173,824 I 16:21:46 Write Mode: DVD I 16:21:46 Write Type: DAO I 16:21:46 Write Speed: 2.4x I 16:21:46 Link Size: Auto I 16:21:46 Lock Volume: Yes I 16:21:46 Test Mode: No I 16:21:46 OPC: No I 16:21:46 BURN-Proof: Enabled I 16:21:46 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 16:21:46 User Specified L0 Data Zone Capacity: 1,913,760 I 16:22:17 Set L0 Data Zone Capacity Succeeded! I 16:22:17 Filling Buffer... (40 MB) I 16:22:18 Writing LeadIn... I 16:22:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 16:22:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 16:22:38 Writing Layer 0... (LBA: 0 - 1913759) W 16:22:52 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write W 16:22:52 Retrying (1 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (2 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (3 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (4 of 20)... W 16:22:52 Retry Failed - Reason: Invalid Address For Write W 16:22:52 Retrying (5 of 20)... W 16:26:55 Retry Failed - Reason: Invalid Address For Write E 16:32:08 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write E 16:32:08 Next Writable Address: 0 I 16:32:08 Synchronising Cache... W 16:32:25 User opted to skip the 'Close Track/Session/Disc' functions. E 16:32:25 Failed to Write Image! I 16:32:25 Exporting Graph Data... I 16:32:25 Graph Data File: C:\Documents and Settings\Paul\Application Data\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-800A_KY06_WEDNESDAY-MARCH-31-2010_4-21_PM_MKM-003-00_2.4x.ibg I 16:32:25 Export Successfully Completed! E 16:32:25 Operation Failed! - Duration: 00:10:39 I 16:32:25 Average Write Rate: 44 KB/s (0.0x) - Maximum Write Rate: 3,334 KB/s (2.4x) I 16:55:17 Close Request Acknowledged ; ; ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Wednesday, 31 March 2010, 16:16:20 ; \\****************************************// ; ; I 16:16:16 ImgBurn Version 2.5.1.0 started! I 16:16:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 16:16:16 Total Physical Memory: 3,406,892 KB - Available: 2,740,228 KB W 16:16:16 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:16:16 Initialising SPTI... I 16:16:16 Searching for SCSI / ATAPI devices... I 16:16:16 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA) I 16:16:16 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA) I 16:16:16 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI) I 16:16:16 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM! I 16:16:20 Close Request Acknowledged I 16:16:20 Closing Down... I 16:16:20 Shutting down SPTI... I 16:16:20 ImgBurn closed!