Arun
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Arun
-
-
I have found that 2 disks of the same media type, TDK 50GB BD-RE DL; one would burn at 2X, and the device buffer stays at 94%. The second one would burn at 1X and the device buffer stays at 50%. why? And what can I do to the second disk to burn at 2X?
-
used the pin trick to get the disk out.
-
yay!! After repeatedly trying to erase, hang, reboot, now the drive has stopped working, looks like. When I open imgburn, it does a 5 minute search for device and then find the drive. And when I select write mode, it says device is in the process of being ready and sits there. eject does not work also.
-
theres no newer firmware for my drive than what I have.
-
what drivers? I am on Win 7 x64, and have updated all the chipset drivers, since the problem started. My motherboard is a gigabyte GA-P35 D3SL rev 2.0 with the latest bios.
-
so wonder what could be wrong on my end. Does overclocking affect anything? Like bus speed or something? My latest erase stopped at 47%. And the drive is locked till I reboot
-
so the erase went ok for you?
-
the disk, to remove firngerprints because I have a sweaty hand.
-
there were no write retries, and the log was clean. I am trying another full erase. The only difference this time is my AV(Nod32 64 bit) is turned off.
What do u use for cleaning bd-r?
-
How do u do a burst rate test?
-
I just ran the disk in discovery mode and here's the graph aftera complete run
-
new drive, same issue...erase stops around 40%. Burns dont verify after completion. What can I do now?
-
i have just 5 more days to rma the drive, so going to do that first. I am thinking its the drive too. I got a completed burn and verified 100%, but playing it in a bd player it froze badly
-
I got a new bd-re tdk brand. Heres the graph from imgburn. the burn went successful but got verify errors with miscompares. anything unusual here?
-
I have not tried single layer bd-re, but single bd-r have no problem
-
thats the problem, I cant do a full format, it stops at 54% and then I have to force shutdown imgburn and restart the pc to get my disk out.
-
I am trying to burn a 40GB iso on to a Sony 50GB BD-RE DL. I got about 11 failed to write errors as in the log below. THe burn completed though but it freezes when playing back in my standalone bluray player. Any ideas. Is it the media or the drive itself at issue?
I 15:54:53 Source File File System(s): UDF (2.50)
I 15:54:53 Destination Device: [2:0:0] HL-DT-ST BD-RE WH10LS30 1.00 (H:) (ATA)
I 15:54:53 Destination Media Type: BD-RE (Disc ID: MEI-T01-01) (Speeds: 2x)
I 15:54:53 Destination Media Sectors: 23,652,352
I 15:54:53 Write Mode: BD
I 15:54:53 Write Type: DAO
I 15:54:53 Write Speed: MAX
I 15:54:53 BD-RE FastWrite: Yes
I 15:54:53 Link Size: Auto
I 15:54:53 Lock Volume: Yes
I 15:54:53 Test Mode: No
I 15:54:53 OPC: No
I 15:54:53 BURN-Proof: Enabled
I 15:54:53 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x)
I 15:54:53 Filling Buffer... (40 MB)
I 15:54:54 Writing LeadIn...
I 15:54:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 19044031)
I 15:54:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 19044031)
I 15:54:54 Writing Layer 0... (LBA: 0 - 1527423)
I 16:00:42 Writing Layer 1... (LBA: 1527424 - 19044031)
W 16:36:21 Failed to Write Sectors 10779680 - 10779711 - Reason: Write Error
W 16:36:21 Retrying (1 of 20)...
I 16:36:21 Writing Sectors...
W 16:36:26 Failed to Write Sectors 10798336 - 10798367 - Reason: Write Error
W 16:36:26 Retrying (1 of 20)...
I 16:36:26 Writing Sectors...
W 16:37:26 Failed to Write Sectors 11052992 - 11053023 - Reason: Write Error
W 16:37:26 Retrying (1 of 20)...
I 16:37:26 Writing Sectors...
W 16:37:36 Failed to Write Sectors 11093920 - 11093951 - Reason: Write Error
W 16:37:36 Retrying (1 of 20)...
I 16:37:36 Writing Sectors...
W 16:37:39 Failed to Write Sectors 11103040 - 11103071 - Reason: Write Error
W 16:37:39 Retrying (1 of 20)...
I 16:37:40 Writing Sectors...
W 16:38:01 Failed to Write Sectors 11191936 - 11191967 - Reason: Write Error
W 16:38:01 Retrying (1 of 20)...
I 16:38:01 Writing Sectors...
W 16:38:58 Failed to Write Sectors 11437376 - 11437407 - Reason: Write Error
W 16:38:58 Retrying (1 of 20)...
I 16:38:58 Writing Sectors...
W 16:39:34 Failed to Write Sectors 11588640 - 11588671 - Reason: Write Error
W 16:39:34 Retrying (1 of 20)...
I 16:39:34 Writing Sectors...
W 16:41:33 Failed to Write Sectors 12101568 - 12101599 - Reason: Write Error
W 16:41:33 Retrying (1 of 20)...
I 16:41:33 Writing Sectors...
W 16:44:03 Failed to Write Sectors 12751776 - 12751807 - Reason: Write Error
W 16:44:03 Retrying (1 of 20)...
I 16:44:03 Writing Sectors...
W 16:44:05 Failed to Write Sectors 12752736 - 12752767 - Reason: Write Error
W 16:44:05 Retrying (1 of 20)...
I 16:44:05 Writing Sectors...
I 17:08:07 Synchronising Cache...
I 17:08:15 Exporting Graph Data...
I 17:08:15 Graph Data File: C:\Users\Arun\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_WH10LS30_1.00_WEDNESDAY-OCTOBER-06-2010_3-54_PM_MEI-T01-01_MAX.ibg
I 17:08:15 Export Successfully Completed!
I 17:08:15 Operation Successfully Completed! - Duration: 01:13:21
I 17:08:15 Average Write Rate: 8,670 KB/s (1.9x) - Maximum Write Rate: 9,061 KB/s (2.0x)
Slow burn speed device buffer
in ImgBurn Support
Posted
I found that if I turn fastwrite on, it burns at 2X. Which is better, turn fastwrite on or format without spare areas?