Jump to content

james2805

Members
  • Posts

    6
  • Joined

  • Last visited

Profile Information

  • Location
    United Kingdom

james2805's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. Thanks for the replies mate, will try and get another. From a different source. Thanks again. Really appreciate your time
  2. Yeah, it's a typical burn on those settings. I found it odd that it reduces to 0-10 PI after the layer break. Haven't seen many people posting results like that? So you think it's a dodgy drive? I bought it from a guy in Lithuania on eBay, as seemed the easiest way to ensure getting a Revision B. Did I read some people saying that PC world might have some REV B's? I mean, I just did another burn, same settings, turned Burn Proof off, and increased buffer, although I don't think that will help the cause. And I got a result which I think is acceptable, but not up to the standards that I want. And I want consistency. See result below:
  3. Hello there, I have a IHAS 124 B and Verbatim 8x MKM-003 disks. Some printable surfaced ones and some Silver ones. My settings: FHT: ON SMARTBURN: ON OHT: OFF OS: OFF OPC: ON Clear OPC before each burn I have tried many variations, and this is so far what I have had most luck with, but even then not great. I burn at 4x Speed. They verify in IMGBURN without a problem. The problem comes once testing with Kprobe. My results are not terrible as such, but they are a little obscure too. For example, before the layer break is where the problems are, consistently rising/high PI, then after the layerbreak at 50%, it settles down to nearly 0 for rest of the burn. The last few burns I have made with same settings have all been worse though, I hade a PIF of 9 on last one. See example of one of the better burns below:
  4. Same error at 4x. Its the drive, must be.
  5. Will update imgburn but like I say, had a few problems with Nero on DVD+R too. Have already checked for newer firmware, I have the newest, its a shit dvd writer to be fair, but never had any problems until now. try supported speed? im using Verbatim 2.4x Discs. 2.4x is the speed recommended for backing up xbox games too.
  6. Well, basically, i have burned loads and loads of dual layer discs before. I make backups of my XBOX 360 Games with ImgBurn. All of a sudden, my drive has started giving the error below, have tried 5 discs (all Verbatim 2.4x). Tried burning normal DVD+R with Nero and it works sometimes, other times that fails too. Am I right in thinking my Drive is just on its way out? Or needs a clean? (i dont have any laser cleaning fluid or denatured alcohol tho). What you guys think, as its working sometimes with DVD+R and reading movies still, think it just needs a clean? Thanks in advance ; //****************************************\\ ; ImgBurn Version 2.4.4.0 - Log ; Saturday, 18 December 2010, 20:38:34 ; \\****************************************// ; ; I 20:35:53 ImgBurn Version 2.4.4.0 started! I 20:35:53 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 20:35:53 Total Physical Memory: 3,395,856 KB - Available: 2,093,936 KB I 20:35:53 Initialising SPTI... I 20:35:53 Searching for SCSI / ATAPI devices... I 20:35:53 Found 1 DVD-ROM and 1 DVD±RW! I 20:36:16 Operation Started! I 20:36:16 Source File: C:\Users\James\Desktop\Medal_of_Honor\moh.dvd I 20:36:16 Source File Sectors: 3,827,488 (MODE1/2048) I 20:36:16 Source File Size: 7,838,695,424 bytes I 20:36:16 Source File Volume Identifier: DVD_ROM I 20:36:16 Source File Volume Set Identifier: ec67c000MS UDFBridge I 20:36:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:36:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:36:16 Source File File System(s): ISO9660, UDF (1.50) I 20:36:16 Destination Device: [2:0:0] HL-DT-ST DVD+-RW GSA-H73N B103 (E:) (ATA) I 20:36:16 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 20:36:16 Destination Media Sectors: 4,173,824 I 20:36:16 Write Mode: DVD I 20:36:16 Write Type: DAO I 20:36:16 Write Speed: 2.4x I 20:36:16 Link Size: Auto I 20:36:16 Lock Volume: Yes I 20:36:16 Test Mode: No I 20:36:16 OPC: No I 20:36:16 BURN-Proof: Enabled I 20:36:16 Book Type Setting: N/A I 20:36:16 Optimal L0 Data Zone Capacity: 1,913,760 I 20:36:16 Optimal L0 Data Zone Method: Copied From Original Disc I 20:36:16 Set L0 Data Zone Capacity Succeeded! I 20:36:16 Filling Buffer... (40 MB) I 20:36:17 Writing LeadIn... W 20:36:43 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x80) W 20:36:43 Retrying (1 of 20)... W 20:36:43 Retry Failed - Reason: No Seek Complete W 20:36:43 Retrying (2 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (3 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (4 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (5 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (6 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (7 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (8 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (9 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (10 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (11 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (12 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (13 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (14 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (15 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (16 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (17 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (18 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (19 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write W 20:36:43 Retrying (20 of 20)... W 20:36:43 Retry Failed - Reason: Invalid Address For Write E 20:36:52 Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x80) E 20:36:52 Next Writable Address: 0 I 20:36:52 Synchronising Cache... I 20:37:00 Closing Track... I 20:37:01 Finalising Disc... E 20:37:02 Failed to Write Image! E 20:37:02 Operation Failed! - Duration: 00:00:46 I 20:37:02 Average Write Rate: N/A - Maximum Write Rate: N/A I 20:38:34 Close Request Acknowledged I 20:38:34 Closing Down... I 20:38:34 Shutting down SPTI... I 20:38:34 ImgBurn closed!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.