DiabloZoe

Yes I have 1.09 installed and the disc finally burned and I played it a little bit to see if it worked!! But I took your advice since I was in the middle of the burn when I contacted the forum! I popped in a new disc last night since these are RE disc's and formatted with ImgBurn and it seems to be burning just fine at 2x!! Then we will see about playback!! Thanks for the heads up Lighting!!

But this is the second time this has happened!! Same spot! I will post the log right now! I 11:15:42 ImgBurn Version 2.5.5.0 started! I 11:15:42 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 11:15:42 Total Physical Memory: 7,861,752 KB - Available: 6,522,088 KB I 11:15:42 Initialising SPTI... I 11:15:42 Searching for SCSI / ATAPI devices... I 11:15:42 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (M:) (SATA) I 11:15:42 Found 1 BD-RE! I 11:16:23 Operation Started! I 11:16:23 Building Image Tree... I 11:16:24 Calculating Totals... I 11:16:24 Preparing Image... I 11:16:24 Contents: 9 Files, 15 Folders I 11:16:24 Content Type: BD Video I 11:16:24 Data Type: MODE1/2048 I 11:16:24 File System(s): UDF (2.50) I 11:16:24 Volume Label: [Not Configured] I 11:16:24 Size: 32,925,598,592 bytes I 11:16:24 Sectors: 16,076,958 I 11:16:24 Image Size: 32,926,597,120 bytes I 11:16:24 Image Sectors: 16,077,440 I 11:16:24 Operation Successfully Completed! - Duration: 00:00:00 I 11:16:31 Operation Started! I 11:16:31 Building Image Tree... I 11:16:33 Calculating Totals... I 11:16:33 Preparing Image... I 11:16:34 Contents: 9 Files, 15 Folders I 11:16:34 Content Type: BD Video I 11:16:34 Data Type: MODE1/2048 I 11:16:34 File System(s): UDF (2.50) I 11:16:34 Volume Label: MIDDLE_MEN I 11:16:34 Size: 32,925,598,592 bytes I 11:16:34 Sectors: 16,076,958 I 11:16:34 Image Size: 32,926,597,120 bytes I 11:16:34 Image Sectors: 16,077,440 I 11:16:35 Operation Successfully Completed! - Duration: 00:00:04 I 11:16:35 Operation Started! I 11:16:35 Source File: -==/\/[bUILD IMAGE]\/\==- I 11:16:35 Source File Sectors: 16,077,440 (MODE1/2048) I 11:16:35 Source File Size: 32,926,597,120 bytes I 11:16:35 Source File Volume Identifier: MIDDLE_MEN I 11:16:35 Source File Volume Set Identifier: 3E495A0F00F5521E I 11:16:35 Source File Application Identifier: ImgBurn v2.5.5.0 I 11:16:35 Source File Implementation Identifier: ImgBurn I 11:16:35 Source File File System(s): UDF (2.50) I 11:16:35 Destination Device: [2:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (M:) (SATA) I 11:16:35 Destination Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000) (Speeds: 2x) I 11:16:35 Destination Media Sectors: 23,652,352 I 11:16:35 Write Mode: BD I 11:16:35 Write Type: DAO I 11:16:35 Write Speed: MAX I 11:16:35 BD-RE FastWrite: No I 11:16:35 Link Size: Auto I 11:16:35 Lock Volume: Yes I 11:16:35 Test Mode: No I 11:16:35 OPC: No I 11:16:35 BURN-Proof: Enabled I 11:16:35 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 11:16:36 Filling Buffer... (40 MB) I 11:16:38 Writing LeadIn... I 11:16:46 Writing Session 1 of 1... (1 Track, LBA: 0 - 16077439) I 11:16:46 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 16077439) I 11:16:46 Writing Layer 0... (LBA: 0 - 12219391) I 13:37:50 Abort Request Acknowledged I 13:37:53 Synchronising Cache... W 13:38:28 User opted to skip the 'Close Track/Session/Disc' functions. E 13:38:28 Failed to Write Image! I 13:38:33 Exporting Graph Data... I 13:38:33 Graph Data File: C:\Users\Jason Ludwig\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.00_WEDNESDAY-FEBRUARY-09-2011_11-16_AM_TDKBLD-Wfa-000_MAX.ibg I 13:38:33 Export Successfully Completed! E 13:38:33 Operation Failed! - Duration: 02:21:52 I 13:38:33 Average Write Rate: 2,380 KB/s (0.5x) - Maximum Write Rate: 4,854 KB/s (1.1x) I 13:41:58 Operation Started! I 13:41:58 Building Image Tree... I 13:41:59 Calculating Totals... I 13:41:59 Preparing Image... I 13:42:00 Contents: 9 Files, 15 Folders I 13:42:00 Content Type: BD Video I 13:42:00 Data Type: MODE1/2048 I 13:42:00 File System(s): UDF (2.50) I 13:42:00 Volume Label: MIDDLE_MEN I 13:42:00 Size: 32,925,598,592 bytes I 13:42:00 Sectors: 16,076,958 I 13:42:00 Image Size: 32,926,597,120 bytes I 13:42:00 Image Sectors: 16,077,440 I 13:42:01 Operation Successfully Completed! - Duration: 00:00:03 I 13:42:01 Operation Started! I 13:42:01 Source File: -==/\/[bUILD IMAGE]\/\==- I 13:42:01 Source File Sectors: 16,077,440 (MODE1/2048) I 13:42:01 Source File Size: 32,926,597,120 bytes I 13:42:01 Source File Volume Identifier: MIDDLE_MEN I 13:42:01 Source File Volume Set Identifier: 3E496D3C00F5521E I 13:42:01 Source File Application Identifier: ImgBurn v2.5.5.0 I 13:42:01 Source File Implementation Identifier: ImgBurn I 13:42:01 Source File File System(s): UDF (2.50) I 13:42:01 Destination Device: [2:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (M:) (SATA) I 13:42:01 Destination Media Type: BD-RE (Disc ID: TDKBLD-Wfa-000) (Speeds: 2x) I 13:42:01 Destination Media Sectors: 23,652,352 I 13:42:01 Write Mode: BD I 13:42:01 Write Type: DAO I 13:42:01 Write Speed: MAX I 13:42:01 BD-RE FastWrite: No I 13:42:01 Link Size: Auto I 13:42:01 Lock Volume: Yes I 13:42:01 Test Mode: No I 13:42:01 OPC: No I 13:42:01 BURN-Proof: Enabled I 13:42:01 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 13:42:01 Filling Buffer... (40 MB) I 13:42:02 Writing LeadIn... I 13:42:04 Writing Session 1 of 1... (1 Track, LBA: 0 - 16077439) I 13:42:04 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 16077439) I 13:42:04 Writing Layer 0... (LBA: 0 - 12219391) Now the only thing that I have seen funny with these discs is they have never burned faster then 1x and if I stop and format with Imgburn it will take 10-12hrs for a 50gb disc right? My drive is new its a LGBH10

I am burning Middle Men and at 59% burn speed has dropped down to 0.1x and then down to 0.0 its been like that for a while?? Never have seen this before I am burning a 50gb TDK RE that I formatted in windows. I have already burned a few disc's but have not run into this problem. I canceled the first burn and reformatted the disc but its the same thing. No changes as this is the way I always burn. I really don't know what to do so any help will be appreciated!

You need to use Verbatim DVD+R DL discs! You need to have a samsung drive with kreon FW to read the disc or a drive that you know that can read the disc!! If you are dl just the img file then all that needs to be done is burn with ImgBurn there 2 files iso and a dvd file cant quite remember but I have copied alot of xbox games and have never had a problem PM me and I will walk you through it! I use Verbatim DVD+R DL discs and i have a samsung that can read the discs now. But have you tried to burn some new games like for example need for speed hot pursuit? I've burned it out and the xbox can see that it is need for speed, but it cannot read it. When i run it through abgx360 I got the text that it is antipiracy25 protected in yellow. Has this something to do with the unit not capable of reading it? Cause the region is PAL and it's suppose to work. Not sure about NSF the last game that I backed up was Black Ops and I did not have a problem with it! You run xbox backup creator first, copying the file to the HDD and then you run ABGX360 load the file into that make sure you have it set up so that it can get the required info from the net and patch the waves!! I have not run into a problem with any of the games I have copied!! I will see if I cant get the new NSF and try it out!! I'm in the USA to its NTSC out here don't know if that a issue?

I am using 1.09 FW and the burns so far well have burned just fine!! Now playback of the movie RED had a few jitters not sure what caused them, but I will say that I did have issues burning with my BH08 on BDRE sometimes I would have to format twice and reburn!! Not sure what the exact meaning of the above thread is.....was it media issue or burner issue?? And I will have to look into burning faster, so do I set AWS for the BDRE to max??

I remember someone saying something about the drive not being able to burn at slower speeds I think this has to do with BDRE meida in general, because I was able to burn BDR media at the 1x speed!! But I dont quite agree with you on burning faster produces a better burn!! Thanks for the info!!!

I get the same warning I set AWS on the TDK BDRE to 1x copy rate says 1x but write rate says 2.3x 2.4x which if I remember has to do with the LG FW but I want to write at 1x how do I get ImgBurn or my drive to do this? I have an LGBH10 with the 1.09 FW. I just want to write at the slowest speed possible, I watched a BD that I burned and a couple of instances in the movie it got jittery!

Please tell me what you think is the best bluray burners on the market!!

what are you doing steps start to finish?

You need to use Verbatim DVD+R DL discs! You need to have a samsung drive with kreon FW to read the disc or a drive that you know that can read the disc!! If you are dl just the img file then all that needs to be done is burn with ImgBurn there 2 files iso and a dvd file cant quite remember but I have copied alot of xbox games and have never had a problem PM me and I will walk you through it!

HAHHAAAA ok thanks for the reply!!

All the games I have burned with ImgBurn and have never had any sort of problem!! And this is why the XBOX 360 drives only like Verbatim DL disc!! Plane and simple!! Use these discs and you should not have a problem!! I have burned about 30 of them and not once have I had an issue!! Hope this helps and sorry if its a double post!!!

Ok so I ran the files through TSMuxR and then burned! This changed multiple mts files to one, and now it plays....so does this get ImgBurn of the hook?? Just trying to narrow it down, also the sammy has never had problems playing multiple mts files!

Ok so if we are setup ok? why are these disc not playing? is it the brand of disc? TDK I mean should have have to change anything when burning a BDR or a BDRE? I am using this with FAB and also trued stand alone. If I select the disc in my computer where all the drives are on the screen it automatically pulls up ImgBurn and then burns an ISO to my HDD if I right click and select properties it says 0 bytes used and 22gb free, if I right click it on the left pane while in tree fromat and hit properties I get the BMDV and certificate flders and 15.6 gb used?????

Ok will do thanks for the help!