Jump to content

jmet

Members
  • Content Count

    227
  • Joined

  • Last visited

Posts posted by jmet


  1. Mine does the samething. With 1.1.0.0 I could burn and just surf the web at the same time no problem. With this version I have now (1.2.0.0), when I'm burning, thats the only thing I can do. I can click the "Start" button and it doesn't come up until about 7 seconds later. Looking forward to the next version. :)


  2. I was just looking at the sticks I pulled out, whats the difference between DDR 333 & DDR 400?

     

    (Thinking to myself "That might be the compatibility problem?)

     

    The DDR 333 stick was the 128MB stick that came out of the DELL.

     

    The DDR 400 stick was the 512MB stick that came out of the Compaq.


  3. This computer intially had 1 stick of Corsair 512MB of RAM.

     

    I bought another stick of that same RAM for my second PC (which I no longer have). I ended up giving that stick to my mother cause she only had a 128MB stick in her Dell.

     

    My brothers Compaq PC crashed on him so I robbed a 512MB stick from it.

     

    I then put the 512MB Compaq and the Dell 128MB stick along with my Corsiar 512MB stick.

     

    I learned the hard way not to mix RAM. It won't happen again. lol


  4. _NEC DVD_RW ND-3540A 1.W8

     

    Is that hacked firmware jmet ? I just wondered if your results are more consistent with the stock NEC firmware ? :huh:

    Yea it is.........I get all my NEC firmware from here: http://www.micheldeboer.nl/firmware/

     

    (I re-installed the same firmware again, and I installed the NEC 3520 in this PC. I will try later on testing them. Right now I am installing all the software for my PC, as I just got done reformatting.)


  5. I change the BIOS to boot from CD. Upon rebooting, my BIOS hangs for about 60 seconds, then proceeds to load. When it says press any key to boot from CD, I then press a key. It then goes to a black screen that says "Setup is inspecting your configuration" (or something close to that). It never loads. or I just didn't wait long enough. I waited for like 10 min. There is no activity light blinking either.

     

    What could be wrong?


  6. Well, this is wierd.

     

    It started out the same as before. Although, it took until like %40 percent before it would go past 4.1X but, it got all the way up 8.4X by the end.

     

    I 18:52:27 ImgBurn Version 1.1.0.0 started!
    I 18:52:27 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
    I 18:52:27 Initialising SPTI...
    I 18:52:27 Searching for SCSI / ATAPI devices...
    I 18:52:27 Found 2 DVD?RWs!
    I 18:55:14 Operation Started!
    I 18:55:14 Source File: D:\TWO_FOR_THE_MONEY.ISO
    I 18:55:14 Source File Sectors: 2,285,848 (MODE1/2048)
    I 18:55:14 Source File Size: 4,681,416,704 bytes
    I 18:55:14 Source File Implementation Identifier: DVD Shrink
    I 18:55:14 Destination Device: [1:0:0] _NEC DVD_RW ND-3540A 1.W8 (N:) (ATA)
    I 18:55:14 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)
    I 18:55:14 Destination Media Sectors: 2,295,104
    I 18:55:14 Write Mode: DVD
    I 18:55:14 Write Type: DAO
    I 18:55:14 Write Speed: 8x
    I 18:55:14 Link Size: Auto
    I 18:55:14 Test Mode: No
    I 18:55:14 BURN-Proof: Enabled
    I 18:55:14 Filling Buffer...
    I 18:55:15 Writing LeadIn...
    I 18:55:36 Writing Image...
    I 19:04:48 Synchronising Cache...
    I 19:04:49 Closing Track...
    I 19:05:01 Finalising Disc...
    I 19:05:15 Operation Successfully Completed! - Duration: 00:10:00
    I 19:05:15 Average Write Rate: 8,282 KB/s (6.0x) - Maximum Write Rate: 11,684 KB/s (8.4x)
    I 19:05:15 Cycling Tray before Verify...
    I 19:05:30 Operation Started!
    I 19:05:30 Source Device: [1:0:0] _NEC DVD_RW ND-3540A 1.W8 (N:) (ATA)
    I 19:05:30 Source Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)
    I 19:05:30 Image File: D:\TWO_FOR_THE_MONEY.ISO
    I 19:05:30 Image File Sectors: 2,285,848 (MODE1/2048)
    I 19:05:30 Image File Size: 4,681,416,704 bytes
    I 19:05:30 Image File Implementation Identifier: DVD Shrink
    I 19:05:30 Verifying Sectors...
    I 19:10:36 Operation Successfully Completed! - Duration: 00:05:05
    I 19:10:36 Average Verify Rate: 14,989 KB/s (10.8x) - Maximum Verify Rate: 21,415 KB/s (15.5x)

     

    ImgBurn24themoneylog.jpg


  7. 16X works great! :D

     

     

    I 15:55:08 ImgBurn Version 1.1.0.0 started!
    I 15:55:08 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
    I 15:55:08 Initialising SPTI...
    I 15:55:08 Searching for SCSI / ATAPI devices...
    I 15:55:08 Found 2 DVD?RWs!
    I 15:55:38 Operation Started!
    I 15:55:38 Source File: D:\DOWN_IN_FRAGGLE_ROCK.ISO
    I 15:55:38 Source File Sectors: 2,285,876 (MODE1/2048)
    I 15:55:38 Source File Size: 4,681,474,048 bytes
    I 15:55:38 Source File Implementation Identifier: DVD Shrink
    I 15:55:38 Destination Device: [1:0:0] _NEC DVD_RW ND-3540A 1.W8 (N:) (ATA)
    I 15:55:38 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)
    I 15:55:38 Destination Media Sectors: 2,295,104
    I 15:55:38 Write Mode: DVD
    I 15:55:38 Write Type: DAO
    I 15:55:38 Write Speed: MAX
    I 15:55:38 Link Size: Auto
    I 15:55:38 Test Mode: No
    I 15:55:38 BURN-Proof: Enabled
    I 15:55:38 Filling Buffer...
    I 15:55:39 Writing LeadIn...
    I 15:56:01 Writing Image...
    I 16:01:09 Synchronising Cache...
    I 16:01:10 Closing Track...
    I 16:01:24 Finalising Disc...
    I 16:01:44 Operation Successfully Completed! - Duration: 00:06:05
    I 16:01:44 Average Write Rate: 14,891 KB/s (10.8x) - Maximum Write Rate: 22,136 KB/s (16.0x)
    I 16:01:44 Cycling Tray before Verify...
    I 16:02:00 Operation Started!
    I 16:02:00 Source Device: [1:0:0] _NEC DVD_RW ND-3540A 1.W8 (N:) (ATA)
    I 16:02:00 Source Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)
    I 16:02:00 Image File: D:\DOWN_IN_FRAGGLE_ROCK.ISO
    I 16:02:00 Image File Sectors: 2,285,876 (MODE1/2048)
    I 16:02:00 Image File Size: 4,681,474,048 bytes
    I 16:02:00 Image File Implementation Identifier: DVD Shrink
    I 16:02:00 Verifying Sectors...
    I 16:07:02 Operation Successfully Completed! - Duration: 00:05:02
    I 16:07:02 Average Verify Rate: 15,138 KB/s (10.9x) - Maximum Verify Rate: 22,071 KB/s (15.9x)


  8. I watched it today while I was burning. It gets to 4.1X by 4%. From there it reaches 6.2X at %35, then goes back down to 4.1X around %40 and stays there until it is finished. Even though I selected 8X speed.

     

    Here is the log:

     

    I 15:38:30 ImgBurn Version 1.1.0.0 started!
    I 15:38:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
    I 15:38:30 Initialising SPTI...
    I 15:38:30 Searching for SCSI / ATAPI devices...
    I 15:38:30 Found 2 DVD?RWs!
    I 15:39:08 Operation Started!
    I 15:39:08 Source File: D:\ICE_AGE_DS1.ISO
    I 15:39:08 Source File Sectors: 1,620,085 (MODE1/2048)
    I 15:39:08 Source File Size: 3,317,934,080 bytes
    I 15:39:08 Source File Implementation Identifier: DVD Shrink
    I 15:39:08 Destination Device: [1:0:0] _NEC DVD_RW ND-3540A 1.W8 (N:) (ATA)
    I 15:39:08 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)
    I 15:39:08 Destination Media Sectors: 2,295,104
    I 15:39:08 Write Mode: DVD
    I 15:39:08 Write Type: DAO
    I 15:39:08 Write Speed: 8x
    I 15:39:08 Link Size: Auto
    I 15:39:08 Test Mode: No
    I 15:39:08 BURN-Proof: Enabled
    I 15:39:08 Filling Buffer...
    I 15:39:09 Writing LeadIn...
    I 15:39:31 Writing Image...
    I 15:49:14 Synchronising Cache...
    I 15:49:15 Closing Track...
    I 15:49:27 Finalising Disc...
    I 15:49:44 Operation Successfully Completed! - Duration: 00:10:35
    I 15:49:44 Average Write Rate: 5,567 KB/s (4.0x) - Maximum Write Rate: 8,640 KB/s (6.2x)


  9. What ever burn speed I select, ImgBurn will write 2 speeds below it. Ex: When I select "8X" burn speed,this is what I get: " I 18:30:51 Average Write Rate: 5,548 KB/s (4.0x) - Maximum Write Rate: 8,662 KB/s (6.3x)".

     

    These are the blank disc's I am using:

     

    _NEC DVD_RW ND-3540A 1.W8 (ATA)
    Current Profile: DVD+R
    
    Disc Information:
    Status: Empty
    Erasable: No
    Free Sectors: 2,295,104
    Free Space: 4,700,372,992 bytes
    Free Time: 510:03:29 (MM:SS:FF)
    Supported Write Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x
    
    Physical Format Information (ADIP):
    Disc ID: MCC-004-00
    Book Type: DVD+R
    Part Version: 1
    Disc Size: 120mm
    Maximum Read Rate: Not Specified
    Number of Layers: 1
    Track Path: Parallel Track Path (PTP)
    Linear Density: 0.267 um/bit
    Track Density: 0.74 um/track
    First Physical Sector of Data Area: 196,608
    Last Physical Sector of Data Area: 2,491,711
    Last Physical Sector in Layer 0: 0


  10. Just wanted to thank you LUK!

     

    Today I finally had time to experiment/try the queue function of ImgBurn. It is FANTASTIC! No more having to switch modes, alter settings, etc. Just put in a new disc and ImgBurn automatically does everything for you.

     

    Thank you! :)

     

    jmet

×

Important Information

By using this site, you agree to our Terms of Use.