HeftCD

I found this option by your tip now. I checked only "after write" and I think that is enough thanks .. I will hope this will solve the problem. ehm, any further another question.... where Do you come from? What GMT is it at yours? GERMANY, Dortmund (Nordrheinwestfalen) here it is now Monday 23:23 (MO, 11:23 pm) Just to know when you read posts in forum Thanks

Autorun/insert in IMGBurn? (where is it ?) Or Windows? in Windows I disabled Autorun because of possible Trojans/viruses and so on. (since 2001; and never had trojans by this way )

I 23:38:54 ImgBurn Version 2.5.6.0 started! I 23:38:54 Microsoft Windows XP Professional (5.1, : Service Pack 3) I 23:38:54 Total Physical Memory: 3.144.876 KB - Available: 1.597.312 KB I 23:38:54 Initialising SPTI... I 23:38:54 Searching for SCSI / ATAPI devices... I 23:38:54 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T20L NR02 (E:) (ATA) I 23:38:55 -> Drive 2 - Info: HL-DT-ST DVDRAM GP10NB21 1.00-NF (G:) (USB) I 23:38:55 Found 2 DVD±RW/RAMs! I 23:40:10 Operation Started! I 23:40:10 Building Image Tree... I 23:40:10 Checking Directory Depth... I 23:40:10 Calculating Totals... I 23:40:10 Preparing Image... I 23:40:11 Checking Path Length... I 23:40:11 Contents: 12 Files, 1 Folder I 23:40:11 Content Type: Data I 23:40:11 Data Type: MODE1/2048 I 23:40:11 File System(s): ISO9660, Joliet, UDF (1.02) I 23:40:11 Volume Label: [Not Configured] I 23:40:11 Size: 4.794.005.996 bytes I 23:40:11 Sectors: 2.340.828 I 23:40:11 Image Size: 4.794.613.760 bytes I 23:40:11 Image Sectors: 2.341.120 I 23:40:11 Operation Successfully Completed! - Duration: 00:00:00 I 00:31:42 Operation Started! I 00:31:42 Building Image Tree... I 00:31:42 Checking Directory Depth... I 00:31:42 Calculating Totals... I 00:31:42 Preparing Image... I 00:31:42 Checking Path Length... I 00:31:42 Contents: 12 Files, 0 Folders I 00:31:42 Content Type: Data I 00:31:42 Data Type: MODE1/2048 I 00:31:42 File System(s): ISO9660, Joliet, UDF (1.02) I 00:31:42 Volume Label: [Not Configured] I 00:31:42 Size: 4.794.005.996 bytes I 00:31:42 Sectors: 2.340.828 I 00:31:42 Image Size: 4.794.613.760 bytes I 00:31:42 Image Sectors: 2.341.120 I 00:31:42 Operation Successfully Completed! - Duration: 00:00:00 I 00:33:42 Operation Started! I 00:33:42 Building Image Tree... I 00:33:42 Checking Directory Depth... I 00:33:42 Calculating Totals... I 00:33:42 Preparing Image... I 00:33:42 Checking Path Length... I 00:33:42 Contents: 13 Files, 2 Folders I 00:33:42 Content Type: Data I 00:33:42 Data Type: MODE1/2048 I 00:33:42 File System(s): ISO9660, Joliet, UDF (1.02) I 00:33:42 Volume Label: [Not Configured] I 00:33:42 Size: 4.687.118.125 bytes I 00:33:42 Sectors: 2.288.638 I 00:33:42 Image Size: 4.687.724.544 bytes I 00:33:42 Image Sectors: 2.288.928 I 00:33:42 Operation Successfully Completed! - Duration: 00:00:00 I 00:34:39 Operation Started! I 00:34:39 Building Image Tree... I 00:34:39 Checking Directory Depth... I 00:34:39 Calculating Totals... I 00:34:39 Preparing Image... I 00:34:39 Checking Path Length... I 00:34:39 Contents: 14 Files, 2 Folders I 00:34:39 Content Type: Data I 00:34:39 Data Type: MODE1/2048 I 00:34:39 File System(s): ISO9660, Joliet, UDF (1.02) I 00:34:39 Volume Label: [Not Configured] I 00:34:39 Size: 4.698.720.045 bytes I 00:34:39 Sectors: 2.294.303 I 00:34:39 Image Size: 4.699.357.184 bytes I 00:34:39 Image Sectors: 2.294.608 I 00:34:39 Operation Successfully Completed! - Duration: 00:00:00 I 00:37:10 Project Successfully Saved! I 00:37:10 File Name: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Project Files\Hännesken2012.ibb I 00:37:21 Project Successfully Saved! I 00:37:21 File Name: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Project Files\Hännesken2012.ibb I 00:37:24 Operation Started! I 00:37:24 Building Image Tree... I 00:37:24 Checking Directory Depth... I 00:37:24 Calculating Totals... I 00:37:24 Preparing Image... I 00:37:25 Checking Path Length... I 00:37:25 Contents: 14 Files, 3 Folders I 00:37:25 Content Type: Data I 00:37:25 Data Type: MODE1/2048 I 00:37:25 File System(s): ISO9660, Joliet, UDF (1.02) I 00:37:25 Volume Label: Hännesken2012 I 00:37:25 Size: 4.698.720.045 bytes I 00:37:25 Sectors: 2.294.303 I 00:37:25 Image Size: 4.699.357.184 bytes I 00:37:25 Image Sectors: 2.294.608 I 00:37:40 Operation Successfully Completed! - Duration: 00:00:15 I 00:37:40 Operation Started! I 00:37:40 Source File: -==/\/[bUILD IMAGE]\/\==- I 00:37:40 Source File Sectors: 2.294.608 (MODE1/2048) I 00:37:40 Source File Size: 4.699.357.184 bytes I 00:37:40 Source File Volume Identifier: Hännesken2012 I 00:37:40 Source File Volume Set Identifier: 405B04AC00230344 I 00:37:40 Source File Application Identifier: ImgBurn v2.5.6.0 - The Ultimate Image Burner! I 00:37:40 Source File Implementation Identifier: ImgBurn I 00:37:40 Source File File System(s): ISO9660; Joliet; UDF (1.02) I 00:37:40 Destination Device: [0:0:0] HL-DT-ST DVDRAM GP10NB21 1.00 (G:) (USB) I 00:37:40 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) I 00:37:40 Destination Media Supported Write Speeds: 4x; 8x I 00:37:40 Destination Media Sectors: 2.295.104 I 00:37:40 Write Mode: DVD I 00:37:40 Write Type: DAO I 00:37:40 Write Speed: MAX I 00:37:40 DVD+R Reserve Track: No I 00:37:40 Link Size: Auto I 00:37:40 Lock Volume: Yes I 00:37:40 Test Mode: No I 00:37:40 OPC: No I 00:37:40 BURN-Proof: Enabled W 00:37:41 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Not Supported! - Reason: Die Anforderung wird nicht unterstützt. I 00:37:41 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x) I 00:37:41 Book Type Setting: DVD-ROM I 00:38:39 Filling Buffer... (40 MB) I 00:38:44 Writing LeadIn... I 00:39:04 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294607) I 00:39:04 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294607) I 00:49:02 Synchronising Cache... I 00:49:05 Closing Track... I 00:49:08 Finalising Disc... I 00:49:23 Exporting Graph Data... I 00:49:23 Graph Data File: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GP10NB21_1.00_MONTAG-27-FEBRUAR-2012_00-37_RITEK-F16-01_MAX.ibg I 00:49:23 Export Successfully Completed! I 00:49:23 Operation Successfully Completed! - Duration: 00:11:42 I 00:49:23 Average Write Rate: 7.687 KB/s (5.6x) - Maximum Write Rate: 11.290 KB/s (8.2x) I 00:54:06 Project Successfully Saved! I 00:54:06 File Name: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Project Files\Hännesken2012 Gebrannt.ibb So... all worked fine yesterday with that DVD, but next time I burn, I first need the burn Mode (CTRL+Shift+B ) - then click "burn", 2) after finish burning I need Verify mode (CTRL+Shift+V ) in order to get access (viewing current DIR, open files, etc.) to the previous empty and now filled (burnd) DVD dics? Is it that what you mentioned?

Hello, excuse my ask and expression of the topic aboce for this request. (my English is not best - and I do not know how to describe my problem) I bought an external DVD Burner from LG end of January 2012, because my interal laptop burner is tending to be out of order. This is connected via Y- USB 2.0 cables (2 in Laptop, one in burner) So. Everything works fine with burnin with IMBurn now . But finished my DVD it is not ejected automatically after burning ( => will I need to set this in settings? => then where is th option). So, when I try to open the successful burned DVD with my Filemanager (Total Commander and also MS File explorer - i get presented the directory and file information of the last read (inserted before) CD/DVD - but of course I cannot open any file. Hexvalues of content are 00 00 00 00 00 - yes, that "shown" DVD is not in drive - so it cannot show the content of the file. Ejecting the DVD and reload of the file or Refreshing with F5 do not have any effect. The directory and files I see are NOT the new but the old files I accsessed a session before. HOW can I make visible & accessable the Data which I just burned? (NERO just opened and ejected the DVD; I put it in again and could access the files normally - WHY DOES THIS NOT WORK WITH Imgburn in equal way?) (Two times I burned in panic twice the same constallation of project file without closing IMGburn or chaning anything in that program to ensure all Data are burned correctly. inserting the DVD before or a new SOMETIMES (not all the time) leads to correct content of selected DVD) WHAT Do I need to change, to access the JUST BURNED DVD after Burning without getting a DJ ? (I want to play the just burned videos or compare the files before putting the DVD into cupboard to all the others) MANY THANKS !!!!!! I hope someone can help ?

Hello, I burnd a DATA-DVD with Nero last year which contained some mpeg2 TV recordings (from my laptop USB DVB-T TV Card) - and tested the DVD in my Samsung hardware DVD player. And --- yes, it played all the mpg files. Yesterday and Friday I burnd some new DVB-T TV recordings on a Data DVD with IMGburn. (I had choosen ISO 9660 + Jolliet .. if I remember right.) But those mpg files (contained the same mpeg2 format from TV) were not playable on the DVDplayer. Nor Filenames Names shown. Only Names of the containing Directories were shown. Which settings will I have to choose, to burn with best chance ? What Did Nero choose else? my used settings in NERO [/url] Thanks

ahh, OK, the tabs on the right side/panel. yes .. now I find it ... I looked now for it in =>Tools=>OPTIONs' tabs. For a general option. Thanks. Yes, that is a quick way. Makes sense, too. I saw it when I browsed through all options when I started IB first time, but I did not expect it there anymore.

ha - WellI supposed I you have implemented it ... and I was sure, that I read this anywhere ... but where ? mhh, I don't find it in Options widonw now grml ... (do I have tomatoes on my eyes ?? ) whether on suppage 1, 2 nor 3. Can You give a hint or screenshot please? Thanks

Hi, I want to suggest to a) set the border of the window that is shown as 0 ( none ) (in delphi it is called "none") and to add a own drawn/created button for canceling the calculation process. That makes the appearing and hiding much faster. If I add 4 video files and further 4 in subfolders the window appears, agitates and hides so quick that I cannot read what warning or error message it says. did it ? (of course it did not , all works OK, but I cannot see/read it) Test it. The borderless window is quicker. I suppose this is a bug of the borland compiler. In Delphi are windows with borders slower than witout borders. Of it is a bug of windows itself, because it takes too much time to register a window and TitleBar. OR The other way is to make a further checkbox in options to suppress the "popping" window. (mhh, well I know, some users could be afraid of if they are calculating some 1000 files and the program seems to "freeze" without information. So better take way a). I hope you can follow my explanation (in weak English, sorry). Would be glad if you there could be found a solution. that window so far

Hello, ( working in DATA DVD -MODE ) yes, sometimes it may be a good way to create folders and subfolders automatically and place the files in there (complete Data backups) - when dragging selected files from a File Explorer/TotalCommander. But not in any case. Specially when I add files from explorer to "root DIR" of a project I expect to find them placed where I dragged them to (f.e. in root) and not hidden in folders and subfolders - as they are lying on my harddisc. At moment I have to move (drag) the fiels out of them to root by manually and need to delete the unwanted (sub)folders any time I am dragging files on the list. That costs time. Is there a way to add the files directly to wished place - by setting a checkable option checkbox in OPTIONS, yet ? Which I didn't see? Or please could it be added to options in further versions. And an UNDO-Function for dragging (adding and moving files, creating , reanaimg , deletiing files and folders, etc. in DISC-LAYOUT-Editor would help to increase working speed) I hope you could read and understand my problem and concern - I am sorry, my English isn't best, but I am working on it. I would be very happy if the could found a solution. Many, many thanks - For the software program and at all.